Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 270
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: i386
Multi-Arch: same
Source: ustr
Version: 1.0.4-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/

Package: libperl4-corelibs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 256
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.003-1
Depends: perl
Description: libraries historically supplied with Perl 4
 This is a collection of .pl files that have historically been bundled with
 the Perl core but are planned not to be so distributed with core version
 5.15 or later. Relying on their presence in the core distribution is
 deprecated; they should be acquired from this package instead. From core
 version 5.13, until their removal, it is planned that the core versions of
 these libraries will emit a warning when loaded. The separately packaged
 version will not emit such a warning.
Homepage: http://search.cpan.org/dist/Perl4-CoreLibs/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 625
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.49
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: libasprintf0c2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 62
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Multi-Arch: same
Source: gettext
Version: 0.18.1.1-9
Replaces: gettext-base (<< 0.18.1.1-6)
Depends: libc6 (>= 2.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Pre-Depends: multiarch-support
Breaks: gettext-base (<< 0.18.1.1-6)
Description: GNU library to use fprintf and friends in C++
 This package contains the libasprintf shared library which makes the
 C formatted output routines (fprintf et al.) usable in C++ programs,
 for use with the <string> strings and the <iostream> streams.
Homepage: http://www.gnu.org/software/gettext/

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 202
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: i386
Version: 0.5.7-3
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.4)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: vlan
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 172
Maintainer: Ard van Breemen <ard@kwaak.net>
Architecture: i386
Version: 1.9-3
Depends: libc6 (>= 2.6.1-1), iproute
Conffiles:
 /etc/network/if-up.d/ip 02c0f01378c645ea17ad5057612b9e7c
 /etc/network/if-pre-up.d/vlan 8a9b4274f9caeb06efa2f2f2622ad5db
 /etc/network/if-post-down.d/vlan af8ff6431490f05395844386b1c71210
Description: user mode programs to enable VLANs on your ethernet devices
 This package contains the user mode programs you need to add and remove
 VLAN devices from your ethernet devices.
 .
 A typical application for a VLAN enabled box is a single wire firewall,
 router or load balancer.
 .
 You need a VLAN Linux kernel for this.  Linux kernel versions >= 2.4.14
 have VLAN support.

Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: i386
Multi-Arch: same
Source: libnl3
Version: 3.2.7-4
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Conffiles:
 /etc/libnl-3/pktloc 02e59c3b2bba388ba64b2d120a76bab7
 /etc/libnl-3/classid 3e07259e58674631830b152e983ca995
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: http://people.suug.ch/~tgr/libnl/

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 14026
Maintainer: Michael Stone <mstone@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 8.13-3.5
Replaces: mktemp, timeout
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.7), libselinux1 (>= 1.32)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc od
 paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon
 sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test
 timeout touch tr true truncate tsort tty uname unexpand uniq unlink
 users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1841
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.8.5p2-1+nmu1
Replaces: sudo-ldap
Depends: libc6 (>= 2.11), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules
Conflicts: sudo-ldap
Conffiles:
 /etc/sudoers 45437b4e86fba2ab890ac81db2ec3606
 /etc/pam.d/sudo 85da64f888739f193fc0fa896680030e
 /etc/sudoers.d/README 8d3cf36d1713f40a0ddc38e1b21a51b6
 /etc/init.d/sudo 2d26995849d9edc1294c94516e9a68cc
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 818
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Multi-Arch: same
Source: freetype
Version: 2.4.9-1.1
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 212
Maintainer: Clint Adams <clint@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 4.3.2
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.7)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: libsysfs2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 92
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Multi-Arch: same
Source: sysfsutils
Version: 2.1.0+repack-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: interface library to sysfs
 Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
 tree of system devices. libsysfs provides a stable programming
 interface to sysfs and eases querying system devices and their
 attributes.
 .
 The package sysfsutils contains frontend programs that use this
 library. Development files and C examples are provided by the package
 libsysfs-dev.

Package: bridge-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 142
Maintainer: Santiago Garcia Mantinan <manty@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1.5-6
Depends: libc6 (>= 2.7)
Suggests: ifupdown, net-tools
Conflicts: ifupdown (<< 0.6.0)
Conffiles:
 /etc/default/bridge-utils 551c1fb3cb661fc75b10e75eb284f989
Description: Utilities for configuring the Linux Ethernet bridge
 This package contains utilities for configuring the Linux Ethernet
 bridge in Linux. The Linux Ethernet bridge can be used for connecting
 multiple Ethernet devices together. The connecting is fully
 transparent: hosts connected to one Ethernet device see hosts
 connected to the other Ethernet devices directly.

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 324
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.112
Provides: linux-initramfs-tool
Depends: klibc-utils (>= 2.0-1~), cpio, kmod | module-init-tools, udev
Recommends: busybox (>= 1:1.01-3) | busybox-initramfs | busybox-static
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.1.0-2.1), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), s390-tools (<< 1.8.3-2~)
Conflicts: usplash (<< 0.5.50)
Conffiles:
 /etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070
 /etc/kernel/postinst.d/initramfs-tools 1d77d3e4b57c3da299aacd44b1dc207c
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/initramfs-tools/initramfs.conf 42161705437308c44abc6d46395889c1
 /etc/bash_completion.d/initramfs-tools 7eeb7184772f3658e7cf446945c096b1
Description: generic modular initramfs generator
 This package contains tools to create a bootable initramfs for Linux kernel
 packages. The initramfs is a compressed cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or
 NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.

Package: makedev
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 126
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Version: 2.3.1-92
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2711
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.1.5.1-1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs 57481a000f52991697204006aa6f200e
 /etc/pam.d/login e6f9c742b53359a4371dd9bfc209880c
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/securetty cf2ea2178d07b6bb16d7de7fc1ac3fea
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 432
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: gnupg
Version: 1.4.12-7+deb7u6
Depends: libbz2-1.0, libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 6999
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: openssl
Version: 1.0.1e-2+deb7u13
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: ssh
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 29
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:6.0p1-4+deb7u2
Depends: openssh-client, openssh-server
Description: secure shell client and server (metapackage)
 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.
Homepage: http://www.openssh.org/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: dbus
Version: 1.6.8-1+deb7u4
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 865
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Source: gettext
Version: 0.18.1.1-9
Depends: libc6 (>= 2.4), libasprintf0c2 (>= 0.18.1.1-6)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/

Package: module-init-tools
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 31
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Source: kmod
Version: 9-3
Depends: libkmod2, kmod
Pre-Depends: dpkg (>= 1.15.7.2)
Description: transitional dummy package (module-init-tools to kmod)
 This dummy package is provided to support the transition from
 module-init-tools to kmod and should be removed afterwards.

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 105
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: gdbm
Version: 1.8.3-11
Depends: libc6 (>= 2.1.3), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: ifenslave-2.6
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 96
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Version: 1.1.0-20
Provides: ifenslave
Depends: libc6 (>= 2.0), iproute
Recommends: net-tools
Conflicts: ifenslave (<< 2), ifenslave-2.4 (<= 0.07+2.5.15-6)
Conffiles:
 /etc/network/if-post-down.d/ifenslave 8cc5418ae8f2c12eccc9ee1435a2c35f
 /etc/network/if-up.d/ifenslave 318791a00738baf7c1659b271b24ecfe
 /etc/network/if-pre-up.d/ifenslave 9d57e5651ee1df0383a7c45e75ed599f
Description: Attach and detach slave interfaces to a bonding device
 This is a tool to attach and detach slave network interfaces to a bonding
 device. A bonding device will act like a normal Ethernet network device to
 the kernel, but will send out the packets via the slave devices using a simple
 round-robin scheduler. This allows for simple load-balancing, identical to
 "channel bonding" or "trunking" techniques used in switches.
 .
 The kernel must have support for bonding devices for ifenslave to be useful.
 This package supports 2.6.x kernels and the most recent 2.4.x kernels.

Package: libgcrypt11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 611
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Version: 1.5.0-5+deb7u2
Depends: libc6 (>= 2.4), libgpg-error0 (>= 1.10)
Pre-Depends: multiarch-support
Suggests: rng-tools
Breaks: gnupg2 (<< 2.0.17-2ubuntu2), gpgsm (<< 2.0.17-2ubuntu2), libgnutls26 (<< 2.12.7-3)
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, Tiger,
 Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1855
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: i386
Source: isc-dhcp
Version: 4.2.2.dfsg.1-5+deb70u6
Replaces: dhcp3-common
Provides: dhcp3-common
Depends: libc6 (>= 2.4), debianutils (>= 2.8.2)
Description: common files used by all the isc-dhcp* packages
 This package contains the files used by all the packages from ISC
 DHCP.

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 110
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Multi-Arch: same
Source: util-linux
Version: 2.20.1-5.3
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: libtasn1-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 103
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Version: 2.13-2+deb7u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 71
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 4.1+Debian8+deb7u1
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 566
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1:3.3.3-3
Provides: watch
Depends: libc6 (>= 2.11), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps0 (>= 1:3.3.2-1), libtinfo5, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
 /etc/sysctl.conf 2c6f89fdb09aeac5735144497a261782
 /etc/init.d/procps ed0a7b93a19da8b98bc3aa80e7b5caca
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps

Package: wpasupplicant
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2523
Maintainer: Debian wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: wpa
Version: 2.3-1
Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.1.4), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libpcsclite1, libreadline6 (>= 6.0), libssl1.0.0 (>= 1.0.1), lsb-base, adduser
Suggests: wpagui, libengine-pkcs11-openssl
Breaks: initscripts (<< 2.88dsf-13.3)
Conffiles:
 /etc/wpa_supplicant/functions.sh 0b4f01dfefc23b7bbd22b48c8bf2a4b3
 /etc/wpa_supplicant/action_wpa.sh 41b2e273d616b1c7e7b605bbe8648d8b
 /etc/wpa_supplicant/ifupdown.sh 4c82dbf7e1d8c5ddd70e40b9665cfeee
 /etc/dbus-1/system.d/wpa_supplicant.conf b6e52e30f79834d19db8311417ee0a86
Description: client support for WPA and WPA2 (IEEE 802.11i)
 WPA and WPA2 are methods for securing wireless networks, the former
 using IEEE 802.1X, and the latter using IEEE 802.11i. This software
 provides key negotiation with the WPA Authenticator, and controls
 association with IEEE 802.11i networks.
Homepage: http://w1.fi/wpa_supplicant/

Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 297
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Multi-Arch: same
Source: krb5
Version: 1.10.1+dfsg-5+deb7u2
Depends: libc6 (>= 2.7), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1, libkrb5-3 (= 1.10.1+dfsg-5+deb7u2), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 313
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Multi-Arch: same
Source: fuse
Version: 2.9.0-2+deb7u1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Suggests: fuse
Conflicts: fuse (<< 2.9.0-2+deb7u1)
Description: Filesystem in Userspace (library)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: http://fuse.sourceforge.net/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 345
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 5.9-10
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 422
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Multi-Arch: same
Source: popt
Version: 1.16-7
Replaces: popt
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 240
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Multi-Arch: same
Source: pam
Version: 1.1.3-7.1
Replaces: libpam0g-util
Depends: libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/

Package: libpci3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 110
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: pciutils
Version: 1:3.1.9-6
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 72
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-20+nmu1
Replaces: libusb0
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libccid (<< 0.9.2-3), libusb0
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 364
Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>
Architecture: i386
Multi-Arch: same
Source: libgpg-error
Version: 1.10-3.1
Depends: libc6 (>= 2.1.3)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 660
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Version: 22.19-1+deb7u1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.8), libtinfo5
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: perl-modules
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 14083
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Source: perl
Version: 5.14.2-21+deb7u2
Replaces: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-yaml-perl, libcpanplus-perl, libdigest-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-path-perl, libfile-spec-perl, libfile-temp-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libperl4-corelibs-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libshell-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-yaml-perl, libcpanplus-perl, libdigest-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-path-perl, libfile-spec-perl, libfile-temp-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libperl4-corelibs-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libshell-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Depends: perl (>= 5.14.2-1), libswitch-perl, libclass-isa-perl
Suggests: libpod-plainer-perl
Breaks: libansicolor-perl (<< 3.00), libarchive-tar-perl (<< 1.76), libattribute-handlers-perl (<< 0.89), libautodie-perl (<< 2.10.01), libcgi-pm-perl (<< 3.52), libcpan-meta-perl (<< 2.110440), libcpan-meta-yaml-perl (<< 0.003), libcpanplus-perl (<< 0.9103), libdigest-perl (<< 1.16), libextutils-cbuilder-perl (<< 0.280203), libextutils-command-perl (<< 1.17), libextutils-install-perl (<< 1.56), libextutils-parsexs-perl (<< 2.221000), libfile-path-perl (<< 2.08.01), libfile-spec-perl (<< 3.3300), libfile-temp-perl (<< 0.22), libhttp-tiny-perl (<< 0.012), libi18n-langtags-perl (<< 0.35.01), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27105), liblocale-codes-perl (<< 3.16), liblocale-maketext-perl (<< 1.19), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.994), libmath-complex-perl (<< 1.56), libmodule-build-perl (<< 0.380000), libmodule-corelist-perl (<< 2.49.02), libmodule-load-conditional-perl (<< 0.44), libmodule-load-perl (<< 0.18), libmodule-metadata-perl (<< 1.000004), libmodule-pluggable-perl (<< 3.9), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.38), libparams-check-perl (<< 0.28), libparent-perl (<< 0.225), libparse-cpan-meta-perl (<< 1.4401), libperl-ostype-perl (<< 1.002), libpod-escapes-perl (<< 1.04), libpod-parser-perl (<< 1.37), libpod-simple-perl (<< 3.16), libshell-perl (<< 0.72.01), libtest-harness-perl (<< 3.23), libtest-simple-perl (<< 0.98), libthread-queue-perl (<< 2.12), libtime-local-perl (<< 1.2000), libunicode-collate-perl (<< 0.73), libversion-perl (<< 1:0.8800), libversion-requirements-perl (<< 0.101020), podlators-perl (<< 2.3.1)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules' directly, they
 should use `perl' (which depends on `perl-modules') instead.
Homepage: http://dev.perl.org/perl5/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 180
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Multi-Arch: foreign
Source: util-linux (2.20.1-5.3)
Version: 1:2.20.1-5.3
Depends: libc6 (>= 2.7)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system: logger, renice, script, scriptreplay, and wall.
 The remaining standard BSD utilities are provided by bsdmainutils.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: firmware-realtek
Status: install ok installed
Priority: optional
Section: non-free/kernel
Installed-Size: 481
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: firmware-nonfree
Version: 0.36+wheezy.1
Suggests: initramfs-tools, linux-image
Description: Binary firmware for Realtek wired and wireless network adapters
 This package contains the binary firmware for some Ethernet adapters with
 the RTL8111/RTL8168 chips supported by the r8169 driver; and wireless
 network cards with the RTL8188, RTL8192 and RTL8712 chips supported by the
 r8192_pci, r8192s_usb, r8712u, rtl8192ce, rtl8192cu, rtl8192de and
 rtl8192se drivers.
 .
 Contents:
  * Realtek RTL8192E boot code (RTL8192E/boot.img)
  * Realtek RTL8192E init data (RTL8192E/data.img)
  * Realtek RTL8192E main code (RTL8192E/main.img)
  * Realtek RTL8192SU firmware, version 902B (RTL8192SU/rtl8192sfw.bin)
  * Realtek RTL8105E-1 firmware (rtl_nic/rtl8105e-1.fw)
  * Realtek RTL8111D-1/RTL8168D-1 firmware (rtl_nic/rtl8168d-1.fw)
  * Realtek RTL8111D-2/RTL8168D-2 firmware (rtl_nic/rtl8168d-2.fw)
  * Realtek RTL8168E-1 firmware (rtl_nic/rtl8168e-1.fw)
  * Realtek RTL8168E-2 firmware (rtl_nic/rtl8168e-2.fw)
  * Realtek RTL8168E-3 firmware, version 0.0.4 (rtl_nic/rtl8168e-3.fw)
  * Realtek RTL8168F-1 firmware, version 0.0.4 (rtl_nic/rtl8168f-1.fw)
  * Realtek RTL8168F-2 firmware, version 0.0.4 (rtl_nic/rtl8168f-2.fw)
  * Realtek RTL8192CE/RTL8188CE firmware, version 4.816.2011 (rtlwifi/rtl8192cfw.bin)
  * Realtek RTL8192CE/RTL8188CE B-cut firmware, version 4.816.2011 (rtlwifi/rtl8192cfwU_B.bin)
  * Realtek RTL8188CE A-cut firmware, version 4.816.2011 (rtlwifi/rtl8192cfwU.bin)
  * Realtek RTL8192CU/RTL8188CU firmware (rtlwifi/rtl8192cufw.bin)
  * Realtek RTL8192DE firmware (rtlwifi/rtl8192defw.bin)
  * Realtek RTL8192SE/RTL8191SE firmware (rtlwifi/rtl8192sefw.bin)
  * Realtek RTL8192SU/RTL8712U firmware (rtlwifi/rtl8712u.bin)
Homepage: http://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 107
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.7
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: iw
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 148
Maintainer: Debian/Ubuntu wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 3.4-1
Replaces: aircrack-ng (<< 1:1.0~rc2-1)
Depends: libc6 (>= 2.7), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7)
Recommends: crda
Breaks: aircrack-ng (<< 1:1.0~rc2-1)
Description: tool for configuring Linux wireless devices
 This package contains the `iw' tool which allows you to configure and show
 information about wireless networking.
 .
 In the future iw will become the canonical command line tool for wireless
 configuration and iwconfig/wireless-tools will no longer be required. See
 /usr/share/doc/iw/README.Debian for a more detailed overview of iw.
Homepage: http://wireless.kernel.org/en/users/Documentation/iw

Package: libxapian22
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 4296
Maintainer: Olly Betts <olly@survex.com>
Architecture: i386
Source: xapian-core
Version: 1.2.12-2
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: xapian-tools
Description: Search engine library
 This package contains the core Xapian runtime library.
 .
 The Xapian search engine library is a highly adaptable toolkit which allows
 developers to easily add advanced indexing and search facilities to their own
 applications.  It implements the probabilistic model of information retrieval,
 and provides facilities for performing ranked free-text searches, relevance
 feedback, phrase searching, boolean searching, stemming, and simultaneous
 update and searching.  It is highly scalable, and is capable of working with
 collections containing hundreds of millions of documents.
Homepage: http://xapian.org/

Package: install-info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 212
Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: texinfo
Version: 4.13a.dfsg.1-10
Replaces: texinfo (<< 4.13a.dfsg.1-2)
Depends: libc6 (>= 2.3.4)
Breaks: texinfo (<< 4.13a.dfsg.1-2)
Description: Manage installed documentation in info format
 The install-info utility creates the index of all installed documentation
 in info format and makes it available to info readers.

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 113
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1.0.6-4
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-4), libc6 (>= 2.4)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 491
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Multi-Arch: foreign
Source: ncurses
Version: 5.9-10
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9-3~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4227
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: i386
Source: perl
Version: 5.14.2-21+deb7u2
Replaces: libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.10.1-1)
Provides: libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.14.2
Pre-Depends: libc6 (>= 2.11), dpkg (>= 1.14.20)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libfile-spec-perl (<< 3.3300), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.23), libsocket-perl (<< 1.940), libxsloader-perl (<< 0.13)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 296
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Source: sysvinit
Version: 2.88dsf-41+deb7u1
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Recommends: lsb-base (>= 3.2-14)
Suggests: sysv-rc-conf, bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2638
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Version: 0.9.7.9+deb7u6
Replaces: manpages-pl (<< 20060617-3~)
Depends: libapt-pkg4.12 (>= 0.9.7.9+deb7u6), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), debian-archive-keyring, gnupg
Suggests: aptitude | synaptic | wajig, dpkg-dev, apt-doc, xz-utils, python-apt
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/cron.daily/apt 6a9df5d143022d22b2e89fa7c1bac8aa
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
 /etc/apt/apt.conf.d/01autoremove b9bbfaa2954b0499576b8d00c37d6a34
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: libswitch-perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 88
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.16-2
Depends: perl, perl-modules
Description: switch statement for Perl
 Switch.pm implements a generalized case mechanism that covers many
 possible combinations of switch and case values.
 .
 This is an obsolete module provided for compatiblity since it is being
 removed from the core. For perl 5.10 and above the "given/when" builtins
 are much preferred.
Homepage: http://search.cpan.org/dist/Switch/

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 951
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1:3.1.9-6
Depends: libc6 (>= 2.7), libpci3 (= 1:3.1.9-6)
Suggests: bzip2, wget | curl | lynx
Description: Linux PCI Utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: libprocps0
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 120
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Multi-Arch: same
Source: procps
Version: 1:3.3.3-3
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 5082
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: grub2
Version: 1.99-27+deb7u2
Replaces: grub-coreboot (<< 1.99-1), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 1.99-1), grub-efi-ia32 (<< 1.99-1), grub-ieee1275 (<< 1.99-1), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 1.99-1), grub-yeeloong (<< 1.99-1)
Depends: libc6 (>= 2.3), libdevmapper1.02.1 (>= 2:1.02.36), libfreetype6 (>= 2.2.1), libfuse2 (>= 2.8.1), zlib1g (>= 1:1.1.4), gettext-base
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6)
Breaks: lupin-support (<< 0.30)
Conflicts: mdadm (<< 2.6.7-2)
Conffiles:
 /etc/bash_completion.d/grub cf52e83153e368b56b4406d07c9bc640
 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
 /etc/grub.d/00_header d22f972a937fe22b08f6de364bb04e85
 /etc/grub.d/10_linux 0ae427a55d6357874d05dfcc0cc09908
 /etc/grub.d/20_linux_xen e064f8969c152cc57a9fc3895c7927a7
 /etc/grub.d/30_os-prober b58034e0e24075d1b6b366e09cd495c6
 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
 /etc/grub.d/41_custom 50fe323bbb00abdf77271f8e87dc175c
 /etc/grub.d/05_debian_theme 5fd93fafc5b7471a8cfd352ee41dd072
Description: GRand Unified Bootloader (common files)
 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
Homepage: http://www.gnu.org/software/grub/

Package: libgssglue1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 86
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: libgssglue
Version: 0.4-2
Replaces: libgssapi2 (<= 0.11-1)
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Conflicts: libgssapi2 (<= 0.11-1)
Conffiles:
 /etc/gssapi_mech.conf a44051ee9dc95201c8358f12206554c9
Description: mechanism-switch gssapi library
 libgssglue provides a gssapi interface, but does not implement any
 gssapi mechanisms itself; instead it calls other gssapi functions
 (e.g., those provided by MIT Kerberos), depending on the requested
 mechanism, to do the work.
Homepage: http://www.citi.umich.edu/projects/nfsv4/linux/

Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 208
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Multi-Arch: same
Source: krb5
Version: 1.10.1+dfsg-5+deb7u2
Depends: libc6 (>= 2.4), libkeyutils1, libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 769
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq
Version: 2.62-3+deb7u1
Depends: libc6 (>= 2.11), libdbus-1-3 (>= 1.1.1), libidn11 (>= 1.13), libnetfilter-conntrack3, libnfnetlink0 (>= 1.0.0)
Conflicts: dnsmasq (<< 2.41)
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 65
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Version: 5.0
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Breaks: ifupdown (<< 0.7~rc1)
Conflicts: inetutils-inetd (<< 2:1.4.3+20060719-3), openbsd-inetd (<< 0.20050402-3)
Conffiles:
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/protocols 2e1e463038cc62e7110e33e21552751f
 /etc/services 22e9e61234a27da688971ba9377ec731
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: live-boot-initramfs-tools
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 65
Maintainer: Debian Live Project <debian-live@lists.debian.org>
Architecture: all
Source: live-boot
Version: 3.0.1-1
Replaces: live-boot-backend
Provides: live-boot-backend
Depends: busybox | busybox-initramfs, initramfs-tools, udev
Conflicts: live-boot-backend
Description: Live System Boot Scripts (initramfs-tools backend)
 live-boot contains the scripts that configure a live system during the boot
 process (early userspace).
 .
 This package contains the initramfs-tools backend.
Homepage: http://live.debian.net/devel/live-boot/

Package: grub-legacy
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 733
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: i386
Source: grub
Version: 0.97-67
Replaces: grub (<< 0.97-54)
Provides: grub
Depends: libc6 (>= 2.7), libncurses5 (>= 5.5-5~), libtinfo5, grub-common
Suggests: grub-legacy-doc, multiboot, mdadm
Conffiles:
 /etc/kernel/postinst.d/zz-update-grub fe8ac9419007a7ca8e13525a35e3c09a
 /etc/kernel/postrm.d/zz-update-grub fe8ac9419007a7ca8e13525a35e3c09a
Description: GRand Unified Bootloader (Legacy version)
 GRUB is a GPLed bootloader intended to unify bootloading across x86
 operating systems.  In addition to loading the Linux kernel,
 it implements the Multiboot standard, which allows for flexible loading
 of multiple boot images (needed for modular kernels such as the GNU Hurd).
 .
 Please note that GRUB Legacy is in maintanance mode and new features are
 only accepted in GRUB 2 (grub-pc package).

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 321
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: libsepol
Version: 2.1.4-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 752
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Multi-Arch: same
Source: pam
Version: 1.1.3-7.1
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libc6 (>= 2.8), libdb5.1, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.0.85), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.3-7.1)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/limits.conf cbacdff4aa5f51749f191b32754946cb
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/namespace.conf c600fa5899cfb3198a01dfba2bf281f3
 /etc/security/pam_env.conf ed3f430e418ad366ddb23307a8755249
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/namespace.init 114e73ed5f40956527286e6213d305bc
 /etc/security/time.conf c23fcbb29dda6c1499e6a5e5ade0265e
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1443
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2014h-0wheezy1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-wheezy
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: libudev0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 189
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Multi-Arch: same
Source: udev
Version: 175-7.2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: libudev shared library
 This library provides access to udev device information.

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 196
Maintainer: Andrew Shadura <andrewsh@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 0.7.8
Replaces: netbase (<< 5.0)
Depends: iproute (>= 20071016-1), libc6 (>= 2.7), lsb-base (>= 4.1+Debian3), initscripts (>= 2.88dsf-25)
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: isc-dhcp-client | dhcp-client, ppp, rdnssd, net-tools
Breaks: dhcp-client (<< 3.0), netbase (<< 5.0)
Conffiles:
 /etc/init.d/networking b91fa5f0529020176659b341b7a1a740
 /etc/init/network-interface.conf 296dd23a2833cc2bb5c646a833011eab
 /etc/init/networking.conf 1a5e78aba88486d1b6070f8fa3bd60ad
 /etc/init/network-interface-security.conf 8d6447a035b681f5fa22d168adcf8dec
 /etc/init/network-interface-container.conf 7fb0862f8c092b33c16ec0f05387fbfb
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 268
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: libsemanage
Version: 2.1.6-6
Depends: libsemanage-common (= 2.1.6-6), libbz2-1.0, libc6 (>= 2.8), libselinux1 (>= 1.32), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Multi-Arch: same
Source: libusbx
Version: 2:1.0.11-1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 192
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Multi-Arch: foreign
Version: 9-3
Replaces: module-init-tools (<< 4)
Depends: libc6 (>= 2.8), libkmod2 (>= 6~), lsb-base (>= 3.0-6)
Breaks: module-init-tools (<< 4)
Conffiles:
 /etc/init.d/kmod 96948a484687c865b98806684649cee8
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: libapt-pkg4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2342
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: apt
Version: 0.9.7.9+deb7u6
Depends: libbz2-1.0, libc6 (>= 2.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), zlib1g (>= 1:1.2.3.3)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~)
Description: package managment runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1102
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 1:3.2-6
Replaces: diff
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: libept1.4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 625
Maintainer: Enrico Zini <enrico@debian.org>
Architecture: i386
Source: libept
Version: 1.0.9
Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0), libxapian22, zlib1g (>= 1:1.2.6)
Description: High-level library for managing Debian package information
 The library defines a very minimal framework in which many sources of data
 about Debian packages can be implemented and queried together.
 .
 The library includes four data sources:
 .
  * APT: access the APT database
  * Debtags: access the Debtags tag information
  * Popcon: access Popcon package scores
  * The Xapian index built by apt-xapian-index
 .
 This is the shared library.

Package: resolvconf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 132
Maintainer: resolvconf maintainers <resolvconf-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.67
Depends: lsb-base, initscripts (>= 2.88dsf-13.10), debconf (>= 0.5) | debconf-2.0
Breaks: dhcp3-client (<< 4.1.1-P1-15+squeeze1), dnscache-run
Enhances: dhcpcd, dnsmasq, ifupdown, isc-dhcp-client, libc6, network-manager, nscd, pdnsd, ppp, pump, totd, udhcpc
Conffiles:
 /etc/network/if-up.d/000resolvconf 9d48827db3133fa6873753894830cb59
 /etc/network/if-down.d/resolvconf 69cb8b35fe967d257850f55091ae38c5
 /etc/dhcp/dhclient-enter-hooks.d/resolvconf 6f8a0dec625b17370c130647a6d4e458
 /etc/resolvconf/interface-order 33e6b76aa10b1cbe72c6c050df536560
 /etc/resolvconf/resolv.conf.d/base d41d8cd98f00b204e9800998ecf8427e
 /etc/resolvconf/resolv.conf.d/head 5aee5a60350035d958401da5c0432be3
 /etc/resolvconf/update.d/dnscache 981435dcc6f7b53a9fa7a0bdfbdaf5e0
 /etc/resolvconf/update.d/libc 8f49c3eded04ad224cde09027d3d5a64
 /etc/init.d/resolvconf ede9f3ffd77294f78b612de9e4fb6e1a
 /etc/ppp/ip-up.d/000resolvconf a3a76c831a5a96917c9b293598901f72
 /etc/ppp/ip-down.d/000resolvconf 9db55ca294345093b5efee82c8b7a6b7
Description: name server information handler
 Resolvconf is a framework for keeping up to date the system's
 information about name servers. It sets itself up as the intermediary
 between programs that supply this information (such as ifup and
 ifdown, DHCP clients, the PPP daemon and local name servers) and
 programs that use this information (such as DNS caches and resolver
 libraries).
 .
 This package may require some manual configuration. Please
 read the README file for detailed instructions.
Homepage: http://alioth.debian.org/projects/resolvconf/

Package: rpcbind
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 141
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 0.2.0-8
Provides: portmap
Depends: libc6 (>= 2.4), libtirpc1, libwrap0 (>= 7.6-4~), lsb-base (>= 3.2-14), insserv (>= 1.14.0-2.1) | file-rc, initscripts (>= 2.88dsf-13.3)
Conflicts: portmap
Conffiles:
 /etc/insserv.conf.d/rpcbind 669a5c3a6ffa8b5b5ce263057934d118
 /etc/init.d/rpcbind 1f91bf3a27d01ee6c3ba8073b78fd7b5
Description: converts RPC program numbers into universal addresses
 The rpcbind utility is a server that converts RPC program numbers
 into universal addresses.
Homepage: http://sourceforge.net/projects/rpcbind/

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 134
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Multi-Arch: same
Source: kmod
Version: 9-3
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2461
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Multi-Arch: foreign
Version: 1.26+dfsg-0.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libc6 (>= 2.8)
Suggests: bzip2, ncompress, xz-utils
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libclass-isa-perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 55
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.36-3
Description: report the search path for a class's ISA tree
 Suppose you have a class (like Food::Fish::Fishstick) that is derived, via
 its @ISA, from one or more superclasses (as Food::Fish::Fishstick is from
 Food::Fish, Life::Fungus, and Chemicals), and some of those superclasses may
 themselves each be derived, via its @ISA, from one or more superclasses (as
 above).
 .
 When, then, you call a method in that class ($fishstick->calories), Perl
 first searches there for that method, but if it's not there, it goes
 searching in its superclasses, and so on, in a depth-first (or maybe
 "height-first" is the word) search. In the above example, it'd first look in
 Food::Fish, then Food, then Matter, then Life::Fungus, then Life, then
 Chemicals.
 .
 This library, Class::ISA, provides functions that return that list -- the
 list (in order) of names of classes Perl would search to find a method, with
 no duplicates.
Homepage: http://search.cpan.org/dist/Class-ISA/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 249
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.20.1-5.3
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libselinux1 (>= 1.32), libsepol1 (>= 1.14)
Pre-Depends: multiarch-support
Description: block device id library
 The device mounting library, used by mount and mount helpers.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: watchdog
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 212
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: i386
Version: 5.12-1
Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, makedev (>= 2.3.1-24) | udev, lsb-base (>= 3.2-14)
Conffiles:
 /etc/init.d/wd_keepalive e906da5781fadc983770aa1031d120fc
 /etc/init.d/watchdog edc40f61dff84c672fc79371ab848d4b
 /etc/watchdog.conf 3500c75339954f7850b44472760b86ad
Description: system health checker and software/hardware watchdog handler
 The watchdog program writes to /dev/watchdog every ten seconds. If
 the device is opened but not written to within a minute, the machine
 will reboot. This feature is available when the kernel is built with
 "software watchdog" support (standard in Debian kernels) or if the
 machine is equipped with a hardware watchdog (in which case this
 package can also be used to "pet" it, resetting its timer).
 .
 The kernel software watchdog's ability to reboot will depend on the
 state of the machine and interrupts.
 .
 The watchdog tool itself runs several health checks and acts
 appropriately if the system is not in good shape.
Homepage: http://watchdog.sourceforge.net

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 165
Maintainer: Mark Brown <broonie@debian.org>
Architecture: i386
Multi-Arch: same
Source: zlib
Version: 1:1.2.7.dfsg-13
Provides: libz1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: libapt-inst1.5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 329
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: apt
Version: 0.9.7.9+deb7u6
Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Pre-Depends: multiarch-support
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1066
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: iptraf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 588
Maintainer: Frederic Peters <fpeters@debian.org>
Architecture: i386
Version: 3.0.0-8.1
Depends: libc6 (>= 2.3), libncurses5 (>= 5.5-5~), libtinfo5
Conffiles:
 /etc/logrotate.d/iptraf 6627fbb377f40ec46f7b8fddebd18be2
Description: Interactive Colorful IP LAN Monitor
 IPTraf is an ncurses-based IP LAN monitor that generates
 various network statistics including TCP info, UDP counts,
 ICMP and OSPF information, Ethernet load info, node stats,
 IP checksum errors, and others.

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 165
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Version: 1:2.0.18-3
Depends: libc6 (>= 2.4)
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: http://traceroute.sourceforge.net/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 145
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: gcc-4.7 (4.7.2-5)
Version: 1:4.7.2-5
Depends: gcc-4.7-base (= 4.7.2-5), libc6 (>= 2.2.4)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: nocatsplash
Status: install ok installed
Priority: optional
Section: main
Installed-Size: 240
Maintainer: root <punkytse@yahoo.com>
Architecture: i386
Version: 0.92-4
Depends: libc6 (>= 2.7), libglib1.2ldbl (>= 1.2.10-18)
Conffiles:
 /etc/nocat.conf f189ea9678074ccc42d92e9b71c77c8c
 /etc/default/nocatsplash c7c5addfa0a8e0517461151b3cda53dc
 /etc/init.d/nocatsplash 77969f731294dc933bb8b6cadd1c357a
Description: gateway daemon for open public network
 NoCatSplash is a Open Public Network Gateway Daemon.  It performs as a
 [captive/open/active] portal.  When run on a gateway/router on a network,
 all web requests are redirected until the client either logs in or clicks
 "I Accept" to an AUP. The gateway daemon then changes the firewall rules
 on the gateway to pass traffic for that client (based on IP address and
 MAC address).

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 133
Maintainer: maximilian attems <maks@debian.org>
Architecture: i386
Source: klibc
Version: 2.0.1-3.1
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: http://git.kernel.org/?p=libs/klibc/klibc.git;a=summary

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 414
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 7.1wheezy7
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 5592444ed03ba54f4c087fb6f5b4edc4
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue a18897477f3fb6f0115ea42f61ffc80a
 /etc/issue.net adf32bc904b048f378c22f2df797861e
 /etc/os-release 22585b94012c8e6dc2e0aa8958288ee9
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 401
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Multi-Arch: foreign
Source: util-linux
Version: 2.20.1-5.3
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.8), libmount1 (>= 2.20.1), libselinux1 (>= 2.0.15), libsepol1 (>= 1.14)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: pcmciautils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 115
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 018-8
Depends: libc6 (>= 2.4)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: udev
Suggests: wireless-tools
Description: PCMCIA utilities for Linux 2.6
 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
 later, replacing the old pcmcia-cs tools used with earlier kernel versions.
 PCMCIA cards are commonly used in laptops to provide expanded capabilities
 such as network connections, modems, increased memory, etc.
 .
 To use PCMCIA you need to have kernel modules available to support
 it. These are included in the stock Debian 2.6 kernel packages. You
 will most likely also need udev, although it isn't always required.
 .
 The wireless-tools package is required by many wireless network adapters.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 824
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Multi-Arch: same
Source: sqlite3
Version: 3.7.13-1+deb7u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/

Package: hostapd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1439
Maintainer: Debian wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: wpa (2.3-1)
Version: 1:2.3-1
Depends: libc6 (>= 2.4), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libnl-route-3-200, libssl1.0.0 (>= 1.0.1), lsb-base
Breaks: initscripts (<< 2.88dsf-13.3)
Conffiles:
 /etc/init.d/hostapd 666b9ab55a1e45985f7b8d412aaffb38
 /etc/default/hostapd b326712dd39d93391a785abba6f2a9b4
 /etc/hostapd/ifupdown.sh a4d051525d3c8cdecd2aeaae15ba2aa0
Description: IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
 Originally, hostapd was an optional user space component for Host AP
 driver. It adds more features to the basic IEEE 802.11 management
 included in the kernel driver: using external RADIUS authentication
 server for MAC address based access control, IEEE 802.1X Authenticator
 and dynamic WEP keying, RADIUS accounting, WPA/WPA2 (IEEE 802.11i/RSN)
 Authenticator and dynamic TKIP/CCMP keying.
 .
 The current version includes support for other drivers, an integrated
 EAP authenticator (i.e., allow full authentication without requiring
 an external RADIUS authentication server), and RADIUS authentication
 server for EAP authentication.
 .
 hostapd works with the following drivers:
 .
  * mac80211 based drivers with support for master mode [linux]
  * Host AP driver for Prism2/2.5/3 [linux]
  * Driver interface for FreeBSD net80211 layer [kfreebsd]
  * Any wired Ethernet driver for wired IEEE 802.1X authentication.
Homepage: http://w1.fi/wpa_supplicant/

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 366
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Multi-Arch: same
Source: readline6
Version: 6.2+dfsg-0.1
Depends: readline-common, libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 289
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Multi-Arch: same
Source: ncurses
Version: 5.9-10
Depends: libtinfo5 (= 5.9-10), libc6 (>= 2.4)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 624
Maintainer: Paul Slootman <paul@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 3.0.9-4
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.8), libpopt0 (>= 1.14), lsb-base (>= 3.2-14), base-files (>= 4.0.1)
Suggests: openssh-client, openssh-server
Breaks: duplicity (<< 0.6.11)
Conffiles:
 /etc/init.d/rsync 14875a3578ab580e9b887b6b158b8291
 /etc/default/rsync e0d7efac23e911c65f44b08de446e837
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: http://rsync.samba.org/

Package: ppp
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 814
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: ppp (2.4.5-5.1)
Version: 2.4.5-5.1+b1
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpcap0.8 (>= 0.9.8), libpam-modules, libpam-runtime, procps
Breaks: network-manager (<= 0.8.0.999-1), network-manager-pptp (<= 0.8.0.999-1), pppdcapiplugin (<= 1:3.9.20060704+dfsg.1-1)
Conffiles:
 /etc/logrotate.d/ppp 8434ebaff1b3b33bb0ea0bce523adfd3
 /etc/pam.d/ppp cc163be3dbe4258e639238ccd5bcdea0
 /etc/ppp/ipv6-down e11550beb886ac90b2b79f0b9fea67d6
 /etc/ppp/ip-down 85d38850a138c53ae48bd2736b1b2753
 /etc/ppp/ip-down.d/0000usepeerdns aaae5708fe89b23c76b94fc9862e1381
 /etc/ppp/ip-up bb4b48272ac4adf06cbc6caf4ede3a1c
 /etc/ppp/options 8bf2e0b8499592fa1c119818fe5a326f
 /etc/ppp/ipv6-up 047b617b3d150aeed5e1c7fea7e14e04
 /etc/ppp/ip-up.d/0000usepeerdns bab9720708c00e7ebba8bfb7d32077dd
 /etc/init.d/pppd-dns 012c202fe77fcf24a15530db1a011fce
 /etc/bash_completion.d/pon 41cf8cde5bd9fefe51100a051947b118
 /etc/chatscripts/gprs 49518071cd909518f6c79480b69cd10c
 /etc/chatscripts/pap 17dbbede1dc894aa6c6c4e8be5727c1d
Description: Point-to-Point Protocol (PPP) - daemon
 The Point-to-Point Protocol provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link to negotiate various optional characteristics
 of the link.
 .
 This package is most commonly used to manage a modem for dial-up or
 certain kinds of broadband connections.

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 19
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: i386
Multi-Arch: same
Source: keyutils
Version: 1.5.5-3+deb7u1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 149
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Version: 3.8.1-4
Depends: libc6 (>= 2.8), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4)
Recommends: mailx
Breaks: postgresql-common (<= 126)
Conffiles:
 /etc/logrotate.conf 176edd439a499501372cf3d04e795810
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.

Package: iproute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 973
Maintainer: Debian iproute maintainers <ah-iproute@debian.org>
Architecture: i386
Multi-Arch: foreign
Source: iproute (20120521-3)
Version: 20120521-3+b3
Provides: arpd
Depends: libc6 (>= 2.4), libdb5.1
Recommends: libatm1
Suggests: iproute-doc
Conflicts: arpd
Conffiles:
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
 /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/ematch_map 0b9befbbbee4b415319b8070f18b9b88
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
Description: networking and traffic control tools
 The iproute suite, also known as iproute2, is a collection of
 utilities for networking and traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2

Package: libboost-iostreams1.49.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 158
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: i386
Source: boost1.49
Version: 1.49.0-3.2
Depends: libbz2-1.0, libc6 (>= 2.3.6-6~), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.1.4)
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/

Package: arptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 112
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Version: 0.0.3.4-1
Depends: libc6 (>= 2.7)
Description: ARP table administration
 Arptables is used to set up, maintain, and inspect the tables of
 ARP rules in the Linux kernel. It is analogous to iptables,
 but operates at the ARP layer rather than the IP layer.
Homepage: http://ebtables.sourceforge.net

Package: voyage-util
Status: install ok unpacked
Priority: optional
Section: main
Installed-Size: 304
Maintainer: Punky Tse <punkytse@yahoo.com>
Architecture: all
Version: 0.14-1
Conffiles:
 /etc/voyage-profiles/4801.pro newconffile
 /etc/voyage-profiles/4501.pro newconffile
 /etc/voyage-profiles/apu.pro newconffile
 /etc/voyage-profiles/alix.pro newconffile
 /etc/voyage-profiles/5501.pro newconffile
 /etc/voyage-profiles/6501.pro newconffile
 /etc/voyage-profiles/4511.pro newconffile
 /etc/voyage-profiles/genericpc.pro newconffile
 /etc/voyage-profiles/wrap.pro newconffile
 /etc/voyage-profiles/notebook.pro newconffile
 /etc/insserv.conf.d/voyage-sync newconffile
 /etc/default/voyage-util newconffile
 /etc/dnsmasq.more.conf newconffile
 /etc/motd.voyage newconffile
 /etc/voyage.conf newconffile
 /etc/bash_completion.d/trafmon newconffile
 /etc/init.d/voyage-sync newconffile
 /etc/init.d/voyage-util newconffile
 /etc/init.d/voyage-pxe newconffile
Description: This debian package contains all useful scripts for installing
 and configurating voyage linix distribution.

Package: iperf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 121
Maintainer: Roberto Lumbreras <rover@debian.org>
Architecture: i386
Version: 2.0.5-3
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Description: Internet Protocol bandwidth measuring tool
 Iperf is a modern alternative for measuring TCP and UDP bandwidth performance,
 allowing the tuning of various parameters and characteristics.
 .
 Features:
    * Measure bandwidth, packet loss, delay jitter
    * Report MSS/MTU size and observed read sizes.
    * Support for TCP window size via socket buffers.
    * Multi-threaded. Client and server can have multiple simultaneous
      connections.
    * Client can create UDP streams of specified bandwidth.
    * Multicast and IPv6 capable.
    * Options can be specified with K (kilo-) and M (mega-) suffices.
    * Can run for specified time, rather than a set amount of data to transfer.
    * Picks the best units for the size of data being reported.
    * Server handles multiple connections.
    * Print periodic, intermediate bandwidth, jitter, and loss reports at
      specified intervals.
    * Server can be run as a daemon.
    * Use representative streams to test out how link layer compression affects
      your achievable bandwidth.
Homepage: http://iperf.sourceforge.net/

Package: usbutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 681
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Version: 1:005-3
Depends: libc6 (>= 2.3), libusb-1.0-0 (>= 2:1.0.8), zlib1g (>= 1:1.2.3.3)
Suggests: wget (>= 1.8.1-6) | lynx (>= 2.8.4.1b-3)
Description: Linux USB utilities
 This package contains the lsusb utility for inspecting the devices
 connected to the USB bus. It shows a graphical representation of the
 devices that are currently plugged in, showing the topology of the
 USB bus. It also displays information on each individual device on
 the bus.
 .
 More information can be found at the Linux USB web site
 http://www.linux-usb.org/ .

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 307
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: lvm2 (2.02.95-8)
Version: 2:1.02.74-8
Depends: libc6 (>= 2.4), libselinux1 (>= 1.32), libudev0 (>= 0.140), dmsetup (>= 2:1.02.74-8)
Pre-Depends: multiarch-support
Breaks: lvm2 (<< 2.02.66)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: attr
Version: 1:2.4.46-8
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libdaemon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: libdaemon
Version: 0.14-2
Depends: libc6 (>= 2.2)
Description: lightweight C library for daemons - runtime library
 libdaemon is a leightweight C library which eases the writing of UNIX daemons.
 It consists of the following parts:
 .
  * Wrapper around fork() for correct daemonization of a process
  * Wrapper around syslog() for simple log output to syslog or STDERR
  * An API for writing PID files
  * An API for serializing signals into a pipe for use with select() or poll()
  * An API for running subprocesses with STDOUT and STDERR redirected to syslog
 .
 Routines like these are included in most of the daemon software available. It
 is not simple to get these done right and code duplication is not acceptable.
 .
 This package includes the libdaemon run time shared library.
Homepage: http://0pointer.de/lennart/projects/libdaemon/

Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 306
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Multi-Arch: same
Source: libpcap
Version: 1.3.0-1
Replaces: libpcap0.8-dev (<< 1.0.0-2)
Depends: libc6 (>= 2.11)
Pre-Depends: multiarch-support
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, the libpcap authors created this system-independent API
 to ease in porting and to alleviate the need for several
 system-dependent packet capture modules in each application.
Homepage: http://www.tcpdump.org/

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 838
Maintainer: Clint Adams <clint@debian.org>
Architecture: i386
Version: 4.2.1-10
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 361
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: i386
Multi-Arch: same
Source: libidn
Version: 1.25-2
Replaces: libidn11-dev
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libatm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Peter De Schrijver (p2) <p2@mind.be>
Architecture: i386
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-1.5
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Conflicts: atm-tools (<< 2.4.1-6)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Homepage: http://linux-atm.sourceforge.net/

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 896
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Version: 4.3.0-1
Depends: libc6 (>= 2.7), libpcap0.8 (>= 1.2.1), libssl1.0.0 (>= 1.0.0)
Description: command-line network traffic analyzer
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect attacks
 or to monitor network activities.
Homepage: http://www.tcpdump.org/

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 395
Maintainer: maximilian attems <maks@debian.org>
Architecture: i386
Source: klibc
Version: 2.0.1-3.1
Depends: libklibc (= 2.0.1-3.1)
Breaks: initramfs-tools (<< 0.103)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: http://git.kernel.org/?p=libs/klibc/klibc.git;a=summary

Package: firmware-linux-nonfree
Status: install ok installed
Priority: optional
Section: non-free/kernel
Installed-Size: 1527
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: firmware-nonfree
Version: 0.36+wheezy.1
Replaces: firmware-linux (<< 0.19)
Suggests: initramfs-tools, linux-image
Conflicts: firmware-linux (<< 0.19)
Description: Binary firmware for various drivers in the Linux kernel
 This package contains the binary firmware for  various drivers in the
 Linux kernel.  This is a collection of firmware blobs which are not
 individually large enough to warrant a standalone package.
 .
 Contents:
  * 3Com Typhoon firmware, version 03.001.008 (3com/typhoon.bin)
  * AdvanSys ASC-3550 firmware (advansys/3550.bin)
  * AdvanSys ASC-38C0800 firmware (advansys/38C0800.bin)
  * AdvanSys ASC-38C1600 firmware (advansys/38C1600.bin)
  * AdvanSys SCSI controller microcode (advansys/mcode.bin)
  * Agere/Prism/Symbol Orinoco firmware (AP mode), version 9.48 Hermes I (agere_ap_fw.bin)
  * Agere/Prism/Symbol Orinoco firmware (STA mode), version 9.48 Hermes I (agere_sta_fw.bin)
  * Chelsio T3 optical EDC firmware (AEL2005 PHY) (cxgb3/ael2005_opt_edc.bin)
  * Chelsio T3 twinax EDC firmware (AEL2005 PHY) (cxgb3/ael2005_twx_edc.bin)
  * Chelsio T3 twinax EDC firmware (AEL2020 PHY) (cxgb3/ael2020_twx_edc.bin)
  * Chelsio T3B protocol engine firmware, version 1.1.0 (cxgb3/t3b_psram-1.1.0.bin)
  * Chelsio T3C protocol engine firmware, version 1.1.0 (cxgb3/t3c_psram-1.1.0.bin)
  * Chelsio T3 main firmware, version 7.4.0 (cxgb3/t3fw-7.4.0.bin)
  * Chelsio T3 main firmware, version 7.10.0 (cxgb3/t3fw-7.10.0.bin)
  * Chelsio T4 firmware, version 1.4.16.0 (cxgb4/t4fw-1.4.16.0.bin)
  * DAB-USB FPGA bitfile (dabusb/bitstream.bin)
  * DAB-USB firmware (dabusb/firmware.fw)
  * Xceive 5000 tuner firmware, version 1.6.114 (dvb-fe-xc5000-1.6.114.fw)
  * DiBcom dib0700 USB DVB bridge firmware, version 1.20 (dvb-usb-dib0700-1.20.fw)
  * Intel 82559 D101M microcode (e100/d101m_ucode.bin)
  * Intel 82559 D101S microcode (e100/d101s_ucode.bin)
  * Intel 82551-F and 82551-10 microcode (e100/d102e_ucode.bin)
  * ENE UB6250 MS Pro read/write firmware (ene-ub6250/msp_rdwr.bin)
  * ENE UB6250 MS init firmware (ene-ub6250/ms_init.bin)
  * ENE UB6250 MS read/write firmware (ene-ub6250/ms_rdwr.bin)
  * ENE UB6250 SD init stage 1 firmware (ene-ub6250/sd_init1.bin)
  * ENE UB6250 SD init stage 2 firmware (ene-ub6250/sd_init2.bin)
  * ENE UB6250 SD read/write firmware (ene-ub6250/sd_rdwr.bin)
  * kaweth/new_code.bin
  * kaweth/new_code_fix.bin
  * kaweth/trigger_code.bin
  * kaweth/trigger_code_fix.bin
  * Matrox G200 WARP engine microcode (matrox/g200_warp.fw)
  * Matrox G400/G550 WARP engine microcode (matrox/g400_warp.fw)
  * Multi-Tech USB CDMA modem firmware (mts_cdma.fw)
  * Multi-Tech USB EDGE modem firmware (mts_edge.fw)
  * Multi-Tech USB GPRS modem firmware (mts_gsm.fw)
  * Rage 128 CCE microcode (r128/r128_cce.bin)
  * Radeon HD IGP 7500/7600 series ME microcode (radeon/ARUBA_me.bin)
  * Radeon HD IGP 7500/7600 series PFP microcode (radeon/ARUBA_pfp.bin)
  * Radeon HD IGP 7500/7600 series RLC microcode (radeon/ARUBA_rlc.bin)
  * Radeon HD 6800 series MC microcode (radeon/BARTS_mc.bin)
  * Radeon HD 6800 series ME microcode (radeon/BARTS_me.bin)
  * Radeon HD 6800 series PFP microcode (radeon/BARTS_pfp.bin)
  * Radeon HD 6300/6500/6800 series RLC microcode (radeon/BTC_rlc.bin)
  * Radeon HD 6300 series MC microcode (radeon/CAICOS_mc.bin)
  * Radeon HD 6300 series ME microcode (radeon/CAICOS_me.bin)
  * Radeon HD 6300 series PFP microcode (radeon/CAICOS_pfp.bin)
  * Radeon HD 6900 series MC microcode (radeon/CAYMAN_mc.bin)
  * Radeon HD 6900 series ME microcode (radeon/CAYMAN_me.bin)
  * Radeon HD 6900 series PFP microcode (radeon/CAYMAN_pfp.bin)
  * Radeon HD 6900 series RLC microcode (radeon/CAYMAN_rlc.bin)
  * Radeon HD 5400 series ME microcode (radeon/CEDAR_me.bin)
  * Radeon HD 5400 series PFP microcode (radeon/CEDAR_pfp.bin)
  * Radeon HD 5400 series RLC microcode (radeon/CEDAR_rlc.bin)
  * Radeon HD 5800/5900 series ME microcode (radeon/CYPRESS_me.bin)
  * Radeon HD 5800/5900 series PFP microcode (radeon/CYPRESS_pfp.bin)
  * Radeon HD 5800/5900 series RLC microcode (radeon/CYPRESS_rlc.bin)
  * Radeon HD 5700 series ME microcode (radeon/JUNIPER_me.bin)
  * Radeon HD 5700 series PFP microcode (radeon/JUNIPER_pfp.bin)
  * Radeon HD 5700 series RLC microcode (radeon/JUNIPER_rlc.bin)
  * Radeon HD IGP 6200/6300/7300 series ME microcode (radeon/PALM_me.bin)
  * Radeon HD IGP 6200/6300/7300 series PFP microcode (radeon/PALM_pfp.bin)
  * Radeon HD 7800 series CE microcode (radeon/PITCAIRN_ce.bin)
  * Radeon HD 7800 series MC microcode (radeon/PITCAIRN_mc.bin)
  * Radeon HD 7800 series ME microcode (radeon/PITCAIRN_me.bin)
  * Radeon HD 7800 series PFP microcode (radeon/PITCAIRN_pfp.bin)
  * Radeon HD 7800 series RLC microcode (radeon/PITCAIRN_rlc.bin)
  * Radeon R100-family CP microcode (radeon/R100_cp.bin)
  * Radeon R200-family CP microcode (radeon/R200_cp.bin)
  * Radeon R300-family CP microcode (radeon/R300_cp.bin)
  * Radeon R400-family CP microcode (radeon/R420_cp.bin)
  * Radeon R500-family CP microcode (radeon/R520_cp.bin)
  * Radeon R600 ME microcode (radeon/R600_me.bin)
  * Radeon R600 PFP microcode (radeon/R600_pfp.bin)
  * Radeon R600-family RLC microcode (radeon/R600_rlc.bin)
  * Radeon R700-family RLC microcode (radeon/R700_rlc.bin)
  * Radeon HD 5500/5600 series ME microcode (radeon/REDWOOD_me.bin)
  * Radeon HD 5500/5600 series PFP microcode (radeon/REDWOOD_pfp.bin)
  * Radeon HD 5500/5600 series RLC microcode (radeon/REDWOOD_rlc.bin)
  * Radeon RS600 CP microcode (radeon/RS600_cp.bin)
  * Radeon RS690 CP microcode (radeon/RS690_cp.bin)
  * Radeon RS780 ME microcode (radeon/RS780_me.bin)
  * Radeon RS780 PFP microcode (radeon/RS780_pfp.bin)
  * Radeon RV610 ME microcode (radeon/RV610_me.bin)
  * Radeon RV610 PFP microcode (radeon/RV610_pfp.bin)
  * Radeon RV620 ME microcode (radeon/RV620_me.bin)
  * Radeon RV620 PFP microcode (radeon/RV620_pfp.bin)
  * Radeon RV630 ME microcode (radeon/RV630_me.bin)
  * Radeon RV630 PFP microcode (radeon/RV630_pfp.bin)
  * Radeon RV635 ME microcode (radeon/RV635_me.bin)
  * Radeon RV635 PFP microcode (radeon/RV635_pfp.bin)
  * Radeon RV670 ME microcode (radeon/RV670_me.bin)
  * Radeon RV670 PFP microcode (radeon/RV670_pfp.bin)
  * Radeon RV710 ME microcode (radeon/RV710_me.bin)
  * Radeon RV710 PFP microcode (radeon/RV710_pfp.bin)
  * Radeon RV730 ME microcode (radeon/RV730_me.bin)
  * Radeon RV730 PFP microcode (radeon/RV730_pfp.bin)
  * Radeon RV770 ME microcode (radeon/RV770_me.bin)
  * Radeon RV770 PFP microcode (radeon/RV770_pfp.bin)
  * Radeon HD IGP 6400/6500/6600 series ME microcode (radeon/SUMO_me.bin)
  * Radeon HD IGP 6400/6500/6600 series PFP microcode (radeon/SUMO_pfp.bin)
  * Radeon HD IGP 6200/6300/6400/6500/6600/7300 series RLC microcode (radeon/SUMO_rlc.bin)
  * Radeon HD 6370D/6380G/6410D ME microcode (radeon/SUMO2_me.bin)
  * Radeon HD 6370D/6380G/6410D PFP microcode (radeon/SUMO2_pfp.bin)
  * Radeon HD 7900 series CE microcode (radeon/TAHITI_ce.bin)
  * Radeon HD 7900 series MC microcode (radeon/TAHITI_mc.bin)
  * Radeon HD 7900 series ME microcode (radeon/TAHITI_me.bin)
  * Radeon HD 7900 series PFP microcode (radeon/TAHITI_pfp.bin)
  * Radeon HD 7900 series RLC microcode (radeon/TAHITI_rlc.bin)
  * Radeon HD 6500/6600/7500 series MC microcode (radeon/TURKS_mc.bin)
  * Radeon HD 6500/6600/7500 series ME microcode (radeon/TURKS_me.bin)
  * Radeon HD 6500/6600/7500 series PFP microcode (radeon/TURKS_pfp.bin)
  * Radeon HD 7700 series CE microcode (radeon/VERDE_ce.bin)
  * Radeon HD 7700 series MC microcode (radeon/VERDE_mc.bin)
  * Radeon HD 7700 series ME microcode (radeon/VERDE_me.bin)
  * Radeon HD 7700 series PFP microcode (radeon/VERDE_pfp.bin)
  * Radeon HD 7700 series RLC microcode (radeon/VERDE_rlc.bin)
  * Tehuti network card firmware (tehuti/bdx.bin)
  * Broadcom BCM5703/BCM5704 TSO firmware (tigon/tg3_tso.bin)
  * Broadcom BCM5701A0 firmware (tigon/tg3.bin)
  * Broadcom BCM5705 TSO firmware (tigon/tg3_tso5.bin)
  * VIA VT6656 firmware (vntwusb.fw)
Homepage: http://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 415
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.5-1.1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: inetutils-syslogd
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 256
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: i386
Source: inetutils
Version: 2:1.9-2
Replaces: syslogd
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.4), netbase, lsb-base
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/syslog.conf f732a7a038ca5eef05be22dd03c11503
 /etc/init.d/inetutils-syslogd c04f21e9f1492c921b43fd1148738135
 /etc/default/inetutils-syslogd 318b7f01be4b1e31c3758bf94f7c3fe9
 /etc/logrotate.d/inetutils-syslogd fda99723c1e6f916bc693547409c91d8
Description: system logging daemon
 The syslog daemon is responsible for providing logging of messages
 received from programs and facilities on the local host as well as
 from remote hosts.
Homepage: http://www.gnu.org/software/inetutils/

Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 82
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Multi-Arch: same
Source: krb5
Version: 1.10.1+dfsg-5+deb7u2
Depends: libc6 (>= 2.3.4), libkeyutils1
Pre-Depends: multiarch-support
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/

Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 2171
Maintainer: Noël Köthe <noel@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1.13.4-3+deb7u2
Depends: libc6 (>= 2.11), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.17-0), libgpg-error0 (>= 1.10), libidn11 (>= 1.13), zlib1g (>= 1:1.1.4), dpkg (>= 1.15.4) | install-info
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc 12cbbf1f2f88dc3b0b289cd368761b7e
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: http://www.gnu.org/software/wget/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 164
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 3.5.26
Replaces: base
Depends: libc6 (>= 2.8)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 95
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.5-1.1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 187
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1.3.3-17
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 4946
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 1.4.12-7+deb7u6
Depends: libbz2-1.0, libc6 (>= 2.4), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), dpkg (>= 1.15.4) | install-info, gpgv
Recommends: libldap-2.4-2 (>= 2.4.7), gnupg-curl
Suggests: gnupg-doc, xloadimage | imagemagick | eog, libpcsclite1
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
 .
 GnuPG does not use any patented algorithms. This means it cannot be
 compatible with PGP2, because that uses IDEA (which is patented in
 a number of countries).
Homepage: http://www.gnupg.org

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 878
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1.60-24.2
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.4)
Conflicts: ja-trans (<= 0.8-2)
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://net-tools.berlios.de/

Package: wireless-regdb
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 48
Maintainer: Ben Hutchings <ben@decadent.org.uk>
Architecture: all
Multi-Arch: foreign
Version: 2014.06.13-1~deb7u1
Suggests: crda
Description: wireless regulatory database
 This package contains the wireless regulatory database used by the Central
 Regulatory Database Agent (CRDA) to configure wireless devices to operate
 within the radio spectrum allowed in the local jurisdiction.
 .
 This regulatory information is provided with no warranty either expressed or
 implied. Only Linux drivers which use cfg80211 framework can make use of the
 regulatory database and CRDA.
Homepage: http://wireless.kernel.org/en/developers/Regulatory/#The_regulatory_database

Package: pppoe
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 312
Maintainer: Andreas Barth <aba@not.so.argh.org>
Architecture: i386
Source: rp-pppoe
Version: 3.8-3
Depends: libc6 (>= 2.5), ppp (>= 2.3.10-1)
Conffiles:
 /etc/ppp/peers/dsl-provider 0bcef4498f82a97ed848067ab05b5238
Description: PPP over Ethernet driver
 PPP over Ethernet (PPPoE) is a protocol used by
 many ADSL Internet service providers. This package allows
 you to connect to those PPPoE service providers.

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1392
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 2.12-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: libtirpc1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 260
Maintainer: Steinar H. Gunderson <sesse@debian.org>
Architecture: i386
Multi-Arch: same
Source: libtirpc
Version: 0.2.2-5
Depends: libc6 (>= 2.3.6-6~), libgssglue1
Pre-Depends: multiarch-support
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.

Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: i386
Multi-Arch: same
Source: libnl3
Version: 3.2.7-4
Depends: libnl-3-200 (= 3.2.7-4), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Homepage: http://people.suug.ch/~tgr/libnl/

Package: linux-image-3.14.12-voyage
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 32627
Maintainer: Kim-man "Punky" Tse <punkytse@voyage.hk>
Architecture: i386
Source: linux-source-3.14.12-voyage
Version: 15.0-1
Provides: linux-image, linux-image-3.14
Depends: coreutils (>= 5.96)
Pre-Depends: debconf (>= 0.2.17) | debconf-2.0
Suggests: fdutils, linux-doc-3.14.12-voyage | linux-source-3.14.12-voyage, ksymoops, linux-image-3.14.12-voyage-dbg
Description: Linux kernel binary image for version 3.14.12-voyage
 This package contains the Linux kernel image for version
 3.14.12-voyage.
 .
 It also contains the corresponding System.map file, and the modules
 built by the packager.  It also contains scripts that try to ensure
 that the system is not left in a unbootable state after an update.
 .
 Kernel image packages are generally produced using kernel-package,
 and it is suggested that you install that package if you wish to
 create a custom kernel from the sources. Please look at kernel-img.conf(5),
 and /usr/share/doc/kernel-package/README.gz  from the package kernel-package
 for details on how to tailor the  installation of this or any other kernel
 image package

Package: ebtables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 333
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Version: 2.0.10.4-1
Depends: libc6 (>= 2.4)
Recommends: iptables, module-init-tools
Conffiles:
 /etc/init.d/ebtables 97728d86f8847986d3539223498fc026
 /etc/ethertypes 94bffde8f75a1b8f891fb780bfe15ca2
 /etc/default/ebtables 4b49d534ccce3c32252e3ac080b8997a
Description: Ethernet bridge frame table administration
 Ebtables is used to set up, maintain, and inspect the tables of
 Ethernet frame rules in the Linux kernel. It is analogous to iptables,
 but operates at the MAC layer rather than the IP layer.
Homepage: http://ebtables.sourceforge.net

Package: conntrack
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 105
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: i386
Version: 1:1.2.1-1
Depends: libc6 (>= 2.7), libnetfilter-conntrack3, libnfnetlink0 (>= 1.0.0)
Description: Program to modify the conntrack tables
 conntrack is a userspace command line program targeted at system
 administrators. It enables them to view and manage the in-kernel
 connection tracking state table.
Homepage: http://conntrack-tools.netfilter.org/

Package: libpipeline1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 98
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Multi-Arch: same
Source: libpipeline
Version: 1.2.1-1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: http://libpipeline.nongnu.org/

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 766
Maintainer: Bash Completion Maintainers <bash-completion-devel@lists.alioth.debian.org>
Architecture: all
Version: 1:2.0-1
Replaces: bash, cryptsetup (<< 2:1.1.2-2), xen-tools (<= 4.1-1)
Depends: bash (>= 3.2)
Pre-Depends: dpkg (>= 1.15.7.2~)
Breaks: xen-tools (<= 4.1-1)
Conffiles:
 /etc/profile.d/bash_completion.sh 7aaf93800df855d2f5637e0025b5fd63
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: http://bash-completion.alioth.debian.org

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2196
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: shadow
Version: 1:4.1.5.1-1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libc6 (>= 2.8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 71
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: i386
Version: 3.11
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: libglib1.2ldbl
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 268
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: glib1.2
Version: 1.2.10-19
Replaces: libglib1.2
Depends: libc6 (>= 2.3.6-6~)
Conflicts: libglib1.2
Description: The GLib library of C routines
 GLib is a library containing many useful C routines for things such as trees,
 hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but
 has been split off as of version 1.1.0.

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 124
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: i386
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.1-1
Depends: libc6 (>= 2.4), libnfnetlink0 (>= 1.0.0)
Pre-Depends: multiarch-support
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: acl
Version: 2.2.51-8
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1116
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.3-7.1
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 1.5.19), libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: libnl-route-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 316
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: i386
Multi-Arch: same
Source: libnl3
Version: 3.2.7-4
Depends: libnl-3-200 (= 3.2.7-4), libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: library for dealing with netlink sockets - route interface
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the configuration interfaces of the NETLINK_ROUTE family.
Homepage: http://people.suug.ch/~tgr/libnl/

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 230
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Version: 2.88dsf-41+deb7u1
Depends: libc6 (>= 2.11), libselinux1 (>= 1.32), libsepol1 (>= 1.14), debianutils (>= 4)
Pre-Depends: initscripts (>= 2.88dsf-13.3), sysv-rc | file-rc, sysvinit-utils (>= 2.86.ds1-66)
Description: System-V-like init utilities
 This package contains programs required for booting
 a Debian system and doing basic process management.
 .
 The most important program in the package is /sbin/init.
 It is the first process started on boot and continues
 to run as process number 1 until the system halts. All
 other processes are descended from it.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1261
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: i386
Multi-Arch: same
Source: slang2
Version: 2.2.4-15
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Homepage: http://www.jedsoft.org/slang/

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 288
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.88dsf-41+deb7u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.86.ds1-64), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), ifupdown (<< 0.7~rc3), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b
 /etc/init.d/bootmisc.sh fc8ccb388e8aa1ea54d70048e9903d64
 /etc/init.d/checkfs.sh 74457ecf8bd853fe1a2ba758053735dc
 /etc/init.d/checkroot.sh efc13158c7d643b5d4baaf68c984dcd1
 /etc/init.d/checkroot-bootclean.sh 4a269606234cf5b57cc05016ce68deb3
 /etc/init.d/halt 6ae1b3b1b8198567a5e32116077f12a2
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 5e404d35091fab6c4889302736ed4602
 /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0
 /etc/init.d/mountall.sh 12977ab22b7d0cc2fea94ed094b24a5a
 /etc/init.d/mountall-bootclean.sh 789bd42ea8dff699ae9b3651d024f83a
 /etc/init.d/mountnfs.sh 289709c3a76bfd9f59a0f071670f01a0
 /etc/init.d/mountnfs-bootclean.sh b0b22bd70a83cffc501df284f1cc7e80
 /etc/init.d/mountdevsubfs.sh ebdcd7d0e2d05978e06da0b9f21ed8d8
 /etc/init.d/mountkernfs.sh 8a995e21ab7f4f58926b8ef05d80892e
 /etc/init.d/mtab.sh df8b4a53c9a18b748543891a2c792de7
 /etc/init.d/rc.local 18cd07959adfa8411ca17fe7c2ec3d96
 /etc/init.d/reboot 1b9db1ef7bfd79b128ef85d5065721a6
 /etc/init.d/rmnologin 3e720aea2c7de0696879cce254b00d87
 /etc/init.d/sendsigs 00ed9a4cdc73711fceef76ddef67dd12
 /etc/init.d/single dc13cb373c5c098a8fb95424701373e3
 /etc/init.d/umountfs 07e4c8c8d9136f36745feb4776edc6f4
 /etc/init.d/umountnfs.sh 7ed49dd49c3ea516df80e7bacc0935f2
 /etc/init.d/umountroot 3e6a08830565a2938fb009b63d8bd0b9
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
 /etc/default/tmpfs 9af2949a1c0373adfa0c7db2453eee62
 /etc/network/if-up.d/mountnfs 15360b6fcb61b7ee7ac35db171e2f570
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 241
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Multi-Arch: same
Source: util-linux
Version: 2.20.1-5.3
Depends: libc6 (>= 2.7), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 103
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.5-1.1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.11)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.1.6-6
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf d1fdb8e1e8be6fa446eb9548bc133a4f
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 214
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Multi-Arch: foreign
Source: pam
Version: 1.1.3-7.1
Replaces: libpam-modules (<< 1.1.3-2)
Depends: libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1615
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: i386
Version: 4.4.2-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.7)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Debian GNU/kFreeBSD <debian-bsd@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: libbsd
Version: 0.4.2-1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: utility functions from BSD systems - shared library
 This library provides some functions commonly available on BSD systems
 but not on others like GNU systems.
Homepage: http://libbsd.freedesktop.org/

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 474
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: i386
Multi-Arch: foreign
Version: 5.1.1alpha+20120614-2
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.7), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2337
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Multi-Arch: foreign
Version: 1.42.5-1.1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42.5-1.1), libblkid1 (>= 2.17.2), libc6 (>= 2.11), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.
Homepage: http://e2fsprogs.sourceforge.net

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 809
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: openssh
Version: 1:6.0p1-4+deb7u2
Replaces: openssh-client (<< 1:3.8.1p1-11), ssh, ssh-krb5
Provides: ssh-server
Depends: libc6 (>= 2.8), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.10+dfsg~), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, openssh-client (= 1:6.0p1-4+deb7u2), libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), lsb-base (>= 3.2-13), procps
Recommends: xauth, ncurses-term, openssh-blacklist, openssh-blacklist-extra
Suggests: ssh-askpass, rssh, molly-guard, ufw, monkeysphere
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7), ssh-nonfree (<< 2), ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
 /etc/network/if-up.d/openssh-server f9d5bc239ec0720cb8ad6e1455fbf21e
 /etc/init.d/ssh 33017d7ec97eda623412c3fd05dedb8f
 /etc/pam.d/sshd ee93e13ec6aa3f3120c6939a2880a5b6
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.org/

Package: dnsmasq
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 120
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: all
Version: 2.62-3+deb7u1
Depends: netbase, adduser, dnsmasq-base (>= 2.62-3+deb7u1)
Suggests: resolvconf
Conflicts: resolvconf (<< 1.15)
Conffiles:
 /etc/init.d/dnsmasq 44f0b93bf73dea20706dedae399c3a74
 /etc/default/dnsmasq 4da2f005c39ee591bb1a71c264947898
 /etc/dnsmasq.conf 8cfe230931914e077c5ce660ba835875
 /etc/resolvconf/update.d/dnsmasq c6248413f30d5c188cd7cb0a89ca4ea6
 /etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242
 /etc/insserv.conf.d/dnsmasq 530a424ac064ea9d86f235d12ecc227a
Description: Small caching DNS proxy and DHCP/TFTP server
 Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP
 server. It is designed to provide DNS and optionally, DHCP, to a
 small network. It can serve the names of local machines which are
 not in the global DNS. The DHCP server integrates with the DNS
 server and allows machines with DHCP-allocated addresses
 to appear in the DNS with names configured either in each host or
 in a central configuration file. Dnsmasq supports static and dynamic
 DHCP leases and BOOTP/TFTP for network booting of diskless machines.

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 320
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: i386
Multi-Arch: same
Source: xz-utils
Version: 5.1.1alpha+20120614-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: libgnutls26
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1399
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: gnutls26
Version: 2.12.20-8+deb7u2
Replaces: gnutls0, gnutls0.4, gnutls3
Depends: libc6 (>= 2.8), libgcrypt11 (>= 1.4.5), libp11-kit0 (>= 0.11), libtasn1-3 (>= 1.6-0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Breaks: ccbuild (<= 2.0.1-1), csync2 (<= 1.34-2.2), freewheeling (<= 0.6-1.1), gkrellm (<= 2.3.4-1), libsoup2.4-1 (= 2.31.2-1), libsoup2.4-1 (<= 2.30.1-1), macopix-gtk2 (<= 1.7.4-3), pokerth (<= 0.8.3-3+b1), pokerth-server (<= 0.8.3-3+b1), sipsak (<= 0.9.6-2.1), slrn (<= 1.0.0~pre18-1.1), slrnpull (<= 1.0.0~pre18-1.1), snowdrop (<= 0.02b-9), ssmtp (<= 2.64-4), tf5 (<= 5.0beta8-4), wput (<= 0.6.2-2), zoneminder (<= 1.24.4-1)
Conflicts: gnutls0, gnutls0.4
Description: GNU TLS library - runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the runtime libraries.
Homepage: http://www.gnutls.org/

Package: libdb5.1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1655
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: db
Version: 5.1.29-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Berkeley v5.1 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.1 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 88
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2014.1~deb7u1
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b
 /etc/apt/trusted.gpg.d/debian-archive-squeeze-automatic.gpg 342e9f6a4bd60ac4e3f1fe74dc46e844
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd
 /etc/apt/trusted.gpg.d/debian-archive-squeeze-stable.gpg 2e662da7572ee5fe2e921c7b1de6e564
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 182
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: i386
Version: 1.14.0-5
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 232
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.5-1.1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.6)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 5969
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Multi-Arch: foreign
Version: 1.16.15
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7), aptitude (<< 0.4.7-1), dpkg-dev (<< 1.15.8), libdpkg-perl (<< 1.15.8), pinfo (<< 0.6.9-3.1), tkinfo (<< 2.8-3.1)
Conffiles:
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
 /etc/cron.daily/dpkg b6b8dc21210ea50db7cc4636f521758f
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: http://wiki.debian.org/Teams/Dpkg

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 363
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Multi-Arch: same
Source: ncurses
Version: 5.9-10
Depends: libtinfo5 (= 5.9-10), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: crda
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 289
Maintainer: Ben Hutchings <ben@decadent.org.uk>
Architecture: i386
Multi-Arch: foreign
Version: 3.13-1
Depends: libc6 (>= 2.7), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libssl1.0.0 (>= 1.0.0), wireless-regdb, iw (>= 3.2-1~)
Conffiles:
 /etc/default/crda d1f1468521b60cdfc0b9d22d5a74975a
Description: wireless Central Regulatory Domain Agent
 This package provides a Central Regulatory Domain Agent (CRDA) to be used by
 the Linux kernel cfg80211 wireless subsystem to query and apply the regulatory
 domain settings wireless devices may operate within for a given location.
 .
 CRDA queries operational frequency regulations stored within the regulatory
 database provided by the wireless-regdb package.
Homepage: http://wireless.kernel.org/en/developers/Regulatory/CRDA

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 169
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: lvm2 (2.02.95-8)
Version: 2:1.02.74-8
Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.74), libudev0 (>= 0.140), util-linux (>> 2.16)
Conflicts: devicekit-disks (<< 009)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 148
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: i386
Source: iputils (3:20101006-1)
Version: 3:20101006-1+b1
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.3), libssl1.0.0 (>= 1.0.0)
Conflicts: ping, suidmanager (<< 0.50)
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: aptitude-common
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9263
Maintainer: Aptitude Development Team <aptitude-devel@lists.alioth.debian.org>
Architecture: all
Source: aptitude
Version: 0.6.8.2-1
Replaces: aptitude (<< 0.6.8-1)
Recommends: aptitude
Breaks: aptitude (<< 0.6.8-1)
Description: architecture indepedent files for the aptitude package manager
 aptitude is a package manager with a number of useful features,
 including: a mutt-like syntax for matching packages in a flexible
 manner, dselect-like persistence of user actions, the ability to
 retrieve and display the Debian changelog of most packages, and a
 command-line mode similar to that of apt-get.
 .
 This package contains the data files and translations used by
 aptitude.
Homepage: http://aptitude.alioth.debian.org/

Package: ifplugd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 344
Maintainer: Walter Franzini <walter.franzini@gmail.com>
Architecture: i386
Version: 0.28-19
Depends: libc6 (>= 2.3), libdaemon0 (>= 0.10), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 3.0-6)
Recommends: ifupdown (>= 0.6.4-4.2)
Suggests: wpasupplicant
Conffiles:
 /etc/ifplugd/ifplugd.action 1898254209035f7a9c36829d315e91fc
 /etc/ifplugd/action.d/ifupdown 7fea8ced4dffc16470aea54de42ae0de
 /etc/pm/sleep.d/74ifplugd 31657debc0bd3fabe459a6ac9d9091ab
 /etc/apm/scripts.d/ifplugd 31657debc0bd3fabe459a6ac9d9091ab
 /etc/init.d/ifplugd b7ca12521dfa63e8da61bee98a086d22
Description: configuration daemon for ethernet devices
 ifplugd is a daemon which will automatically configure your ethernet device
 when a cable is plugged in and automatically de-configure it if the cable is
 pulled out. This is useful on laptops with onboard network adapters, since it
 will only configure the interface when a cable is really connected.  Features
 include:
 .
  * syslog support
  * Multiple ethernet interface support
  * Uses Debian's native ifup/ifdown programs
  * Small executable size and memory footprint
  * Option to beep when the cable is unplugged or plugged
  * Option to beep when the interface configuration succeeds or fails
  * Can be configured to ignore short unplugged or plugged periods
  * Configure WLAN devices (on detecting a successful association to an AP)
  * Supports SIOCETHTOOL, SIOCGMIIREG and SIOCDEVPRIVATE for getting link status
  * Compatibility mode for network devices which do not support cable detection
Homepage: http://0pointer.de/lennart/projects/ifplugd/

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 112
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: bzip2
Version: 1.0.6-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 10783
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: i386
Version: 5.14.2-21+deb7u2
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdevel-dprof-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libmodule-corelist-perl (<< 2.14-2), libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-base (<< 5.10.1-12), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1)
Provides: data-dumper, libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdevel-dprof-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl5
Depends: perl-base (= 5.14.2-21+deb7u2), perl-modules (>= 5.14.2-21+deb7u2), libbz2-1.0, libc6 (>= 2.11), libdb5.1, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.3.3)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.033), libcompress-raw-zlib-perl (<< 2.033), libcompress-zlib-perl (<< 2.033), libdevel-dprof-perl (<< 20110228.00), libdigest-md5-perl (<< 2.51), libdigest-sha-perl (<< 5.71-2+deb7u1), libencode-perl (<< 2.44-1+deb7u1), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.033), libio-compress-bzip2-perl (<< 2.033), libio-compress-perl (<< 2.033), libio-compress-zlib-perl (<< 2.033), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.13), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.27), libsys-syslog-perl (<< 0.27), libthreads-perl (<< 1.83), libthreads-shared-perl (<< 1.37), libtime-hires-perl (<< 1.9721.01), libtime-piece-perl (<< 1.20.01), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1), perl-doc (<< 5.14.2-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Description: Larry Wall's Practical Extraction and Report Language
 An interpreted scripting language, known among some as "Unix's Swiss
 Army Chainsaw".
 .
 Perl is optimised for scanning arbitrary text files and system
 administration.  It has built-in extended regular expression matching
 and replacement, a data-flow mechanism to improve security with
 setuid scripts and is extensible via modules that can interface to C
 libraries.
Homepage: http://dev.perl.org/perl5/

Package: wireless-tools
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 308
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 30~pre9-8
Depends: libc6 (>= 2.7), libiw30 (>= 30~pre1)
Conffiles:
 /etc/network/if-post-down.d/wireless-tools 1f6530d0aee88247fe5001fe2f5f50d0
 /etc/network/if-pre-up.d/wireless-tools 7bfee5216b1073629eeac6cd1fb7e390
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate
 the Linux Wireless Extensions. The Wireless Extension is an interface
 allowing you to set Wireless LAN specific parameters and get the
 specific stats.
Homepage: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 404
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Multi-Arch: same
Source: ncurses
Version: 5.9-10
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: lilo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 617
Maintainer: Joachim Wiedorn <ad_debian@joonet.de>
Architecture: i386
Version: 1:23.2-4
Depends: perl, libc6 (>= 2.3), libdevmapper1.02.1 (>= 2:1.02.20), debconf (>= 0.5) | debconf-2.0
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: lilo-doc
Conffiles:
 /etc/initramfs/post-update.d/runlilo 26731dea16f342295c158a424dd19c23
 /etc/kernel/postinst.d/zz-runlilo 4a42a9b65dc6e3657d27b5c66a098ed2
 /etc/kernel/postrm.d/zz-runlilo da00df07d6a903c58003f43e44903216
Description: LInux LOader - the classic OS boot loader
 You can use LILO to manage your Master Boot Record (with a simple text
 screen, text menu or colorful splash graphics) or call LILO from other
 Boot-Loaders to jump-start the Linux kernel.
 .
 This package contains lilo (the installer) and boot-record-images to
 install Linux, DOS and generic Boot Sectors for other OSes.
Homepage: http://lilo.alioth.debian.org/

Package: gcc-4.7-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 197
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: gcc-4.7
Version: 4.7.2-5
Breaks: dehydra (<= 0.9.hg20110609-2), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3010
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: eglibc
Version: 2.13-38+deb7u6
Replaces: libc0.1, libc0.3, libc6, libc6.1
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/gai.conf bef7187bc7be3830f50ac50727897840
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
 /etc/bindresvport.blacklist d2d1b996add35b65f64a22e9c8413632
Description: Embedded GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * rpcinfo: report RPC information
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.eglibc.org

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 218
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.88dsf-41+deb7u1
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.10), libselinux1 (>= 1.32)
Suggests: bootlogd, sash
Breaks: upstart (<< 1.5-1)
Conflicts: chkconfig (<< 11.0-79.1-2), last, sysvconfig
Conffiles:
 /etc/init/startpar-bridge.conf aab4f8aed4d4803ba1f6d97f6b1152da
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 298
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: i386
Version: 3.0pl1-124
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, checksecurity
Breaks: dpkg (<< 1.15.4)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/init.d/cron 41a84336e522a236ff95d289d528a81a
 /etc/default/cron eae0d979b5007d2af41540d8c2631359
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/pam.d/cron c0914a9d5dfaf3d5b09f83045e8bee93
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 8f111d100ea459f68d333d63a8ef2205
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 157
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: eglibc
Version: 2.13-38+deb7u6
Depends: libc6 (>= 2.13-5)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.eglibc.org

Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 169
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Multi-Arch: same
Source: libedit
Version: 2.11-20080614-5
Depends: libbsd0 (>= 0.0), libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Description: BSD editline and history libraries
 The editline library provides generic line editing and
 history functions.
 .
 It slightly resembles GNU readline
Homepage: http://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/lib/libedit/

Package: live-config
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 148
Maintainer: Debian Live Project <debian-live@lists.debian.org>
Architecture: all
Version: 3.0.23-1+deb7u1
Depends: live-config-sysvinit | live-config-backend
Recommends: live-config-doc, live-tools, console-tools, iproute, keyboard-configuration, locales | locales-all, user-setup, sudo
Suggests: pciutils, wget
Description: Live System Configuration Scripts
 live-config contains the scripts that configure a live system during the boot
 process (late userspace).
 .
 In addition to live-config, a backend for an init system is required, such as
 live-config-sysvinit.
Homepage: http://live.debian.net/devel/live-config/

Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 130
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: p11-kit
Version: 0.12-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Library for loading and coordinating access to PKCS#11 modules - runtime
 Provides a way to load and enumerate PKCS#11 modules. Provides a standard
 configuration setup for installing PKCS#11 modules in such a way that
 they're discoverable.
 .
 Also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 204
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: i386
Multi-Arch: same
Source: libselinux
Version: 2.1.9-5
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 2339
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: i386
Multi-Arch: foreign
Source: openssh
Version: 1:6.0p1-4+deb7u2
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.11), libedit2 (>= 2.11-20080614-1), libgssapi-krb5-2 (>= 1.10+dfsg~), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Recommends: xauth, openssh-blacklist, openssh-blacklist-extra
Suggests: ssh-askpass, libpam-ssh, keychain, monkeysphere
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7)
Conffiles:
 /etc/ssh/moduli 72ced8f8fbc59f318ad00504de5b4384
 /etc/ssh/ssh_config a7a6e6ef00bcd077b9b5e3e1b744fd30
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.org/

Package: libiw30
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 84
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Multi-Arch: same
Source: wireless-tools
Version: 30~pre9-8
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Wireless tools - library
 Wireless tools are used to manipulate the Linux Wireless Extensions. The
 Wireless Extension is an interface allowing you to set Wireless LAN specific
 parameters and get the specific stats.
 .
 This package contains the dynamic library libiw.
Homepage: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html

Package: ntpdate
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 219
Maintainer: Debian NTP Team <pkg-ntp-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: ntp
Version: 1:4.2.6.p5+dfsg-2
Depends: netbase, libc6 (>= 2.4), libssl1.0.0 (>= 1.0.0)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: lockfile-progs
Breaks: dhcp3-client (<< 4.1.0-1)
Conffiles:
 /etc/default/ntpdate 71d857cae72ae1f53380ea4f2e38cb2e
 /etc/network/if-up.d/ntpdate 78a5839e440618260d20d0bcecf05ada
 /etc/logcheck/ignore.d.server/ntpdate 68d4df7cceb0e97bde87126c3a56b219
 /etc/dhcp/dhclient-exit-hooks.d/ntpdate 1d4c6af64ca132451ee95a08686ea111
Description: client for setting system time from NTP servers
 NTP, the Network Time Protocol, is used to keep computer clocks
 accurate by synchronizing them over the Internet or a local network,
 or by following an accurate hardware receiver that interprets GPS,
 DCF-77, NIST or similar time signals.
 .
 ntpdate is a simple NTP client that sets a system's clock to match
 the time obtained by communicating with one or more NTP servers.  It
 is not sufficient, however, for maintaining an accurate clock in the
 long run.  ntpdate by itself is useful for occasionally setting the
 time on machines that do not have full-time network access, such as
 laptops.
 .
 If the full NTP daemon from the package "ntp" is installed, then
 ntpdate is not necessary.
Homepage: http://support.ntp.org/

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 8501
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: eglibc
Version: 2.13-38+deb7u6
Replaces: libc6-i386
Provides: glibc-2.13-1
Depends: libc-bin (= 2.13-38+deb7u6), libgcc1
Recommends: libc6-i686
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: locales (<< 2.13), locales-all (<< 2.13), nscd (<< 2.13)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/i486-linux-gnu.conf de72af11e0f4e741c2cca3e0e87b7af4
Description: Embedded GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.eglibc.org

Package: hostap-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 188
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: i386
Version: 1:0.4.7-1
Depends: libc6 (>= 2.7-1)
Conffiles:
 /etc/network/if-pre-up.d/hostap-utils ec2eea4c85aba0b655b67c896ce3d866
 /etc/modprobe.d/hostap-utils 0a960203120f90f08509ebe8fc2a958d
Description: Utility programs for Host AP driver for Intersil Prism2/2.5/3
 This is a Linux driver for wireless LAN cards based on Intersil's Prism2/2.5/3
 chipset. The driver supports a so called Host AP mode, i.e., it takes care
 of IEEE 802.11 management functions in the host computer and acts as an
 access point. This does not require any special firmware for the wireless
 LAN card. In addition to this, it has support for normal station operations
 in BSS and possible also in IBSS.
 .
 This packages contains binary utilities for use with hostap.
Homepage: http://w1.fi/

Package: live-config-sysvinit
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 62
Maintainer: Debian Live Project <debian-live@lists.debian.org>
Architecture: all
Source: live-config
Version: 3.0.23-1+deb7u1
Replaces: live-config-backend
Provides: live-config-backend
Depends: sysvinit (>= 2.86)
Conflicts: live-config-backend
Conffiles:
 /etc/init.d/live 7a3c400f0b4371f71c59b71470cc3568
 /etc/init.d/live-config 98a397d99d8e2359120bc278212c2921
Description: Live System Configuration Scripts (sysvinit backend)
 live-config contains the scripts that configure a live system during the boot
 process (late userspace).
 .
 This package contains the sysvinit backend.
Homepage: http://live.debian.net/devel/live-config/

Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 852
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Source: apt
Version: 0.9.7.9+deb7u6
Depends: libapt-inst1.5 (>= 0.8.0), libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.4), libdb5.1, libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Suggests: xz-utils
Description: package managment related utility programs
 This package contains some less used commandline utilities related
 to package managment with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 949
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Multi-Arch: foreign
Version: 175-7.2
Replaces: libudev0
Depends: libc6 (>= 2.10), libselinux1 (>= 1.32), libudev0 (= 175-7.2), lsb-base (>= 3.0-6), util-linux (>= 2.16), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Recommends: usbutils, pciutils
Breaks: consolekit (<< 0.4.1), dmsetup (<< 2.02.84-1), libsane (<< 1.0.21-3), linux-image-2.6-486 (<< 2.6.32), linux-image-2.6-686 (<< 2.6.32), linux-image-2.6-686-bigmem (<< 2.6.32), linux-image-2.6-amd64 (<< 2.6.32), linux-image-2.6-k7 (<< 2.6.32), linux-image-2.6-openvz-686 (<< 2.6.32), linux-image-2.6-vserver-686 (<< 2.6.32), linux-image-2.6-vserver-686-bigmem (<< 2.6.32), linux-image-2.6-xen-686 (<< 2.6.32), mdadm (<< 3.0-3), multipath-tools (<< 0.4.8-12), systemd (<< 28)
Conflicts: libc6 (<< 2.9-22)
Conffiles:
 /etc/modprobe.d/fbdev-blacklist.conf f4a0af988321a0e17ef609ecffd08506
 /etc/init.d/udev-mtab ac349aeb0669dceb1b7fce3ecb354df9
 /etc/init.d/udev c9cf56cfb976d11725170aec4cc39aa2
 /etc/init/udev-finish.conf 28ebb3ad2d2c6ca545d72f3f0769f448
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/init/udev.conf b4fb63a560e94cacf94765c9a371db99
 /etc/udev/udev.conf 789b81bf32670806cf18a7fd5c295566
 /etc/udev/links.conf a30361f72b2d414a25612ba41e78f40f
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.

Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1201
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: i386
Version: 1.4.14-3.1
Provides: libxtables7
Depends: libc6 (>= 2.7), libnfnetlink0 (>= 1.0.0)
Breaks: iproute (<< 20120521-3), xtables-addons-common (<< 1.42-2)
Description: administration tools for packet filtering and NAT
 These are the user-space administration tools for the Linux
 kernel's netfilter and iptables. netfilter and iptables provide
 a framework for stateful and stateless packet filtering, network
 and port address translation, and other IP packet manipulation.
 The framework is the successor to ipchains.
 .
 netfilter and iptables are used in applications such as Internet
 connection sharing, firewalls, IP accounting, transparent proxying,
 advanced routing and traffic control.
Homepage: http://www.netfilter.org/

Package: live-boot
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 150
Maintainer: Debian Live Project <debian-live@lists.debian.org>
Architecture: all
Version: 3.0.1-1
Depends: live-boot-initramfs-tools | live-boot-backend
Recommends: live-boot-doc, live-tools, rsync, uuid-runtime
Suggests: curlftpfs, cryptsetup, httpfs2, unionfs-fuse, wget
Description: Live System Boot Scripts
 live-boot contains the scripts that configure a live system during the boot
 process (early userspace).
 .
 In addition to live-boot, a backend for the initrd generation is required, such
 as live-boot-initramfs-tools.
Homepage: http://live.debian.net/devel/live-boot/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 3902
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 4.2+dfsg-0.1+deb7u3
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.11), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 6334b485d48f479d8de056806b274cd3
 /etc/skel/.bashrc d5f897a5ec2b5f55b412004e7715977f
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1526
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Multi-Arch: foreign
Version: 2.20.1-5.3
Replaces: e2fsprogs, fdisk, fstrim, linux32, miscutils, schedutils, setterm, sparc-utils
Provides: linux32, schedutils
Depends: lsb-base (>= 3.0-6), tzdata (>= 2006c-2), initscripts, dpkg (>= 1.15.4) | install-info, debconf (>= 0.5) | debconf-2.0
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.11), libncurses5 (>= 5.5-5~), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: console-tools (<< 1:0.2.3-21), fdisk, fstrim, kbd (<< 1.05-3), linux32, schedutils, setterm
Conffiles:
 /etc/init.d/hwclock.sh 1a06ae984a01e4f583d65c726cc6971b
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: elvis-tiny
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 140
Maintainer: Miquel van Smoorenburg <miquels@debian.org>
Architecture: i386
Version: 1.4-23
Pre-Depends: libc6 (>= 2.3), libtinfo5
Description: Tiny vi compatible editor for the base system
 Elvis-tiny is based on a 1991 Minix version of elvis. You should install
 another vi-editor (such as "vim", "elvis" or "nvi") if you want a vi
 editor that is full featured and has no bugs.

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 844
Maintainer: Ruben Molina <rmolina@udea.edu.co>
Architecture: i386
Version: 2.11+dfsg-0.1
Replaces: cpio-mt
Depends: libc6 (>= 2.6), dpkg (>= 1.15.4) | install-info
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1168
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Multi-Arch: same
Source: gcc-4.7
Version: 4.7.2-5
Depends: gcc-4.7-base (= 4.7.2-5), libc6 (>= 2.11), libgcc1 (>= 1:4.1.1)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libpcsclite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Ludovic Rousseau <rousseau@debian.org>
Architecture: i386
Multi-Arch: same
Source: pcsc-lite
Version: 1.8.4-1+deb7u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Suggests: pcscd (= 1.8.4-1+deb7u1)
Breaks: libpcsclite-dev (<< 1.8.4-1+deb7u1), pcscd (<< 1.8.4-1+deb7u1)
Description: Middleware to access a smart card using PC/SC (library)
 The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
 in a very small form factor for communicating to smartcards and
 readers.
 .
 The PC/SC Lite library is used to connect to the PC/SC daemon from
 a client application and provide access to the desired reader.
Homepage: http://pcsclite.alioth.debian.org/

Package: busybox
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 725
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: i386
Version: 1:1.20.0-7
Replaces: busybox-static
Depends: libc6 (>= 2.11)
Conflicts: busybox-static
Description: Tiny utilities for small and embedded systems
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 This package installs the BusyBox binary but does not install
 symlinks for any of the supported utilities. Some of the utilities
 can be used in the system by installing the busybox-syslogd,
 busybox-udhcpc or busybox-udhcpd packages.
Homepage: http://www.busybox.net

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1884
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: i386
Source: isc-dhcp
Version: 4.2.2.dfsg.1-5+deb70u6
Replaces: dhcp3-client
Provides: dhcp-client, dhcp3-client
Depends: libc6 (>= 2.4), debianutils (>= 2.8.2), isc-dhcp-common (= 4.2.2.dfsg.1-5+deb70u6), iproute
Suggests: resolvconf, avahi-autoipd
Conflicts: dhcp-client (<< 3.0), ifupdown (<< 0.6.8+nmu3), resolvconf (<= 1.45), samba-common (<< 3.0.0beta1-2)
Conffiles:
 /etc/dhcp/dhclient.conf ed8f55fbf1e31a2ab1ac263818c99773
 /etc/dhcp/dhclient-exit-hooks.d/debug 95da2e2070e1c33847923dafef2a2921
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 9f5b3bd5f605e2debf1a7a88a705c1ba
 /etc/dhcp/dhclient-enter-hooks.d/debug 95da2e2070e1c33847923dafef2a2921
Description: ISC DHCP client
 This is the client from the Internet Software Consortium's implementation of
 DHCP. For more information visit http://www.isc.org.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.

Package: less
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 276
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 444-4
Depends: libc6 (>= 2.11), libtinfo5, debianutils (>= 1.8)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 80
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.2+dfsg-0.1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 56
Maintainer: netfilter maintainers <netfilter-maintainers@ned.snow-crash.org>
Architecture: i386
Source: libnfnetlink
Version: 1.0.0-1.1
Depends: libc6 (>= 2.0)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.

Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 120
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-24
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.11)
Pre-Depends: multiarch-support
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 921
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Multi-Arch: same
Source: krb5
Version: 1.10.1+dfsg-5+deb7u2
Depends: libc6 (>= 2.9), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1, libkrb5support0 (= 1.10.1+dfsg-5+deb7u2)
Pre-Depends: multiarch-support
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 454
Maintainer: Norbert Tretkowski <nobse@debian.org>
Architecture: i386
Version: 4.86+dfsg-1
Depends: libc6 (>= 2.11), libperl4-corelibs-perl | perl (<< 5.12.3-7)
Description: Utility to list open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Homepage: http://people.freebsd.org/~abe/

