Package: tcpd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 212
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: tcp-wrappers
Version: 7.6.q-16
Replaces: libwrap0 (<< 7.6-8)
Depends: libc6 (>= 2.7-1), libwrap0 (>= 7.6-4~), debconf (>= 0.5) | debconf-2.0
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libtext-wrapi18n-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1508
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.5.24
Replaces: debconf-tiny
Provides: debconf-2.0
Depends: debconf-i18n | debconf-english
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1)
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgnome2-perl, libqt-perl, libnet-ldap-perl, perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: vlan
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 172
Maintainer: Ard van Breemen <ard@kwaak.net>
Architecture: i386
Version: 1.9-3
Depends: libc6 (>= 2.6.1-1), iproute
Conffiles:
 /etc/network/if-up.d/ip 02c0f01378c645ea17ad5057612b9e7c
 /etc/network/if-pre-up.d/vlan 8a9b4274f9caeb06efa2f2f2622ad5db
 /etc/network/if-post-down.d/vlan af8ff6431490f05395844386b1c71210
Description: user mode programs to enable VLANs on your ethernet devices
 This package contains the user mode programs you need to add and remove
 VLAN devices from your ethernet devices.
 .
 A typical application for a VLAN enabled box is a single wire firewall,
 router or load balancer.
 .
 You need a VLAN Linux kernel for this.  Linux kernel versions >= 2.4.14
 have VLAN support.

Package: mktemp
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 60
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 1.5-9
Pre-Depends: libc6 (>= 2.7-1)
Description: tool for creating temporary files
 This package provides a utility designed to make temporary
 file handling in shell scripts simple and secure.

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 10032
Maintainer: Michael Stone <mstone@debian.org>
Architecture: i386
Version: 6.10-6
Replaces: textutils, shellutils, fileutils, stat, debianutils (<= 2.3.1), dpkg (<< 1.13.2)
Provides: textutils, shellutils, fileutils
Pre-Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.6.1-1), libselinux1 (>= 2.0.15)
Conflicts: stat
Description: The GNU core utilities
 This package contains the essential basic system utilities.
 .
 Specifically, this package includes:
 basename cat chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir
 dircolors dirname du echo env expand expr factor false fmt fold groups head
 hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mv nice nl
 nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir
 sha1sum seq shred sleep sort split stat stty sum sync tac tail tee test touch
 tr true tsort tty uname unexpand uniq unlink users vdir wc who whoami yes

Package: sudo
Status: deinstall ok config-files
Priority: optional
Section: admin
Installed-Size: 432
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.6.9p17-2
Config-Version: 1.6.9p17-2
Replaces: sudo-ldap
Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1), libpam-modules
Conflicts: sudo-ldap
Conffiles:
 /etc/init.d/sudo 28b7098198570a6c5115c6095bcbc8f7
 /etc/pam.d/sudo 402488da83015090763d681fffae6340
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support.

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 272
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 2.30
Pre-Depends: libc6 (>= 2.7-1)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel mkboot run-parts
 savelog sensible-browser sensible-editor sensible-pager tempfile
 which.

Package: libsysfs2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 112
Maintainer: Martin Pitt <mpitt@debian.org>
Architecture: i386
Source: sysfsutils
Version: 2.1.0-5
Depends: libc6 (>= 2.7-1)
Description: interface library to sysfs
 Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
 tree of system devices. libsysfs provides a stable programming
 interface to sysfs and eases querying system devices and their
 attributes.
 .
 The package sysfsutils contains frontend programs that use this
 library. Development files and C examples are provided by the package
 libsysfs-dev.

Package: bridge-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 108
Maintainer: Santiago Garcia Mantinan <manty@debian.org>
Architecture: i386
Version: 1.4-5
Depends: libc6 (>= 2.7-1)
Recommends: ifupdown
Conflicts: ifupdown (<< 0.6.0)
Description: Utilities for configuring the Linux Ethernet bridge
 This package contains utilities for configuring the Linux Ethernet
 bridge in Linux 2.4 or later. The Linux Ethernet bridge can be used
 for connecting multiple Ethernet devices together. The connecting is
 fully transparent: hosts connected to one Ethernet device see hosts
 connected to the other Ethernet devices directly.

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 412
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Version: 0.92o
Provides: linux-initramfs-tool
Depends: klibc-utils (>= 1.5.9-1), cpio, module-init-tools, udev (>= 0.086-1), findutils (>= 4.2.24)
Recommends: busybox (>= 1:1.01-3) | busybox-initramfs
Conffiles:
 /etc/initramfs-tools/initramfs.conf 688ffc50c04f13f0b887818cb34c1fe1
 /etc/initramfs-tools/update-initramfs.conf 33a1aebf3e99ab3202b793fde2759ebf
Description: tools for generating an initramfs
 This package contains tools to create and boot an initramfs for packaged 2.6
 Linux kernel. The initramfs is a gzipped cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on EVMS, MD, LVM2,
 LUKS or NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.

Package: makedev
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 148
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: all
Version: 2.3.1-88
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2392
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.1.1-6
Replaces: manpages-de (<< 0.5-3), manpages-es-extra (<< 0.8a-15), manpages-fi (<< 0.2-4), manpages-fr (<< 1.64.0-1), manpages-hu (<< 20010119-5), manpages-it (<< 0.3.4-2), manpages-ja (<< 0.5.0.0.20050915-1), manpages-ko (<< 20050219-2), manpages-tr, manpages-zh
Pre-Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/pam.d/login f02692688a212c02609b23c14d59cc49
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/login.defs d3c11ad6937a820ba94844de4843017e
 /etc/securetty 8ba22b9a65f6c1a80f4a7542291213db
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 300
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: i386
Source: gnupg
Version: 1.4.9-3+lenny1
Replaces: gnupg (<< 1.4.5-2)
Depends: libc6 (>= 2.7-1), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org

Package: linux-image-2.6.26-486-voyage
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 17292
Maintainer: Kim-man "Punky" Tse <punkytse@voyage.hk>
Architecture: i386
Source: linux-source-2.6.26-486-voyage
Version: 6.0-3
Provides: linux-image, linux-image-2.6
Depends: initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, coreutils (>= 5.96)
Pre-Depends: debconf (>= 0.2.17) | debconf-2.0
Suggests: lilo (>= 19.1) | grub, fdutils, linux-doc-2.6.26-486-voyage | linux-source-2.6.26-486-voyage, ksymoops
Description: Linux kernel binary image for version 2.6.26-486-voyage
 This package contains the Linux kernel image for version
 2.6.26-486-voyage.
 .
 It also contains the corresponding System.map file, and the modules
 built by the packager.  It also contains scripts that try to ensure
 that the system is not left in a unbootable state after an update.
 .
 Kernel image packages are generally produced using kernel-package,
 and it is suggested that you install that package if you wish to
 create a custom kernel from the sources. Please look at kernel-img.conf(5),
 and /usr/share/doc/kernel-package/README.gz  from the package kernel-package
 for details on how to tailor the  installation of this or any other kernel
 image package

Package: ssh
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 44
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:5.1p1-5
Depends: openssh-client, openssh-server
Description: secure shell client and server (metapackage)
 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 340
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: dbus
Version: 1.2.1-5
Depends: libc6 (>= 2.7-1)
Recommends: dbus
Conflicts: dbus (<< 0.60)
Description: simple interprocess messaging system
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: module-init-tools
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 288
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 3.4-1
Depends: libc6 (>= 2.7-1), lsb-base (>= 3.0-6)
Conflicts: modutils
Conffiles:
 /etc/modprobe.d/aliases 689a662d350c4d5f033e455643dbc616
 /etc/modprobe.d/arch/i386 1f68153d4f9feab7fe197b0949573a54
 /etc/init.d/module-init-tools 2ea4c9bb43a28087092707fc8a4c46dd
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux (versions 2.5.48 and above). It serves
 the same function that the "modutils" package serves for Linux 2.4.
Homepage: http://www.kerneltools.org/

Package: ifenslave-2.6
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 56
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Version: 1.1.0-10
Depends: libc6 (>= 2.7-1)
Recommends: net-tools
Conflicts: ifenslave (<< 2), ifenslave-2.4 (<= 0.07+2.5.15-6)
Conffiles:
 /etc/network/if-pre-up.d/ifenslave cfcc5d60fef841cb243c370b93353932
 /etc/network/if-post-down.d/ifenslave baf541c9f909ce79fc565342a3e35e31
Description: Attach and detach slave interfaces to a bonding device
 This is a tool to attach and detach slave network interfaces to a bonding
 device. A bonding device will act like a normal Ethernet network device to
 the kernel, but will send out the packets via the slave devices using a simple
 round-robin scheduler. This allows for simple load-balancing, identical to
 "channel bonding" or "trunking" techniques used in switches.
 .
 The kernel must have support for bonding devices for ifenslave to be useful.
 This package supports 2.6.x kernels and the most recent 2.4.x kernels. For
 older kernels use the ifenslave-2.4 package.

Package: inetutils-inetd
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 184
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: i386
Source: inetutils
Version: 2:1.5.dfsg.1-9
Provides: inet-superserver, netkit-inetd
Depends: libc6 (>= 2.7-1), update-inetd, tcpd, lsb-base, inetutils-syslogd | system-log-daemon
Conflicts: inet-superserver, netkit-inetd
Conffiles:
 /etc/init.d/inetutils-inetd 09a5714615e05022c919d27a66cb7c70
Description: internet super server
 Inetd is the daemon that listens on various TCP and UDP ports and spawns
 programs that can't or won't do it for themselves.
Homepage: http://www.gnu.org/software/inetutils/

Package: lzma
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 124
Maintainer: Mohammed Adnène Trojette <adn+deb@diwi.org>
Architecture: i386
Version: 4.43-14
Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1)
Description: Compression method of 7z format in 7-Zip program
 LZMA is a compression algorithm, based on the famous Lempel Ziv
 compression method.
 .
 The main characteristics of the algorithm are very good compression,
 fast decompression, use of lot of RAM for compression and low usage of
 RAM for decompression.
 .
 LZMA provides high compression ratio and very fast decompression, so it
 is very suitable for embedded applications. For example, it can be used
 for ROM (firmware) compression.
 .
 This package provides a gzip-like interface for the lzma program.
Homepage: http://www.7-zip.org/sdk.htm

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 112
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.41.3-1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.7-1)
Recommends: uuid-runtime
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 72
Maintainer: Chris Lawrence <lawrencc@debian.org>
Architecture: all
Source: lsb
Version: 3.2-20
Replaces: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Depends: sed, ncurses-bin
Conflicts: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Description: Linux Standard Base 3.2 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linux-foundation.org/en/LSB

Package: user-setup
Status: deinstall ok config-files
Priority: extra
Section: admin
Installed-Size: 404
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 1.23
Config-Version: 1.23
Depends: debconf (>= 0.5) | debconf-2.0, passwd, adduser
Description: Set up initial user and password
 This package creates an initial user, using the same code as is
 responsible for creating the initial user in the installer. It is only
 likely to be of any use if your system has no non-system users at all.

Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 672
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Version: 1:3.2.7-11
Replaces: bsdutils (<< 2.9x-1), watch
Provides: watch
Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.7), lsb-base (>= 3.0-10)
Recommends: psmisc
Conflicts: libproc-dev (<< 1:1.2.6-2), pgrep (<< 3.3-5), procps-nonfree, w-bassman (<< 1.0-3), watch
Conffiles:
 /etc/sysctl.conf 501f2ac8f8c6be1bbcb06aee4f231f2e
 /etc/init.d/procps 8506d5e4f40af573f756c8c6b83dd200
Description: /proc file system utilities
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.  More information can be found at procps
 website http://procps.sf.net/
 .
 This package includes the following utilities: top, uptime, tload,
 free, vmstat, watch, skill, pmap, pgrep, slabtop and pwdx.

Package: wpasupplicant
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 768
Maintainer: Debian/Ubuntu wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Architecture: i386
Version: 0.6.4-3
Depends: libc6 (>= 2.7-1), libdbus-1-3 (>= 1.1.1), libpcsclite1 (>= 1.4.102), libreadline5 (>= 5.2), libssl0.9.8 (>= 0.9.8f-5), lsb-base (>= 3.0-6), adduser
Suggests: wpagui, libengine-pkcs11-openssl
Conffiles:
 /etc/dbus-1/system.d/wpa_supplicant.conf 2ac04c9c799791b6bfc33320f25f7ed8
 /etc/logrotate.d/wpa_action e89bd56990c96be8d081053026536fae
 /etc/logrotate.d/wpa_supplicant 68db9675f51beafe81a91db13e591fdf
 /etc/wpa_supplicant/ifupdown.sh d13811a3160e187efed1d55acf2e98e8
 /etc/wpa_supplicant/functions.sh 2419f5d579264272b0d6eded907dd4ac
 /etc/init.d/wpa-ifupdown 87ca34ea160f4d1bd9adb18999668c35
Description: Client support for WPA and WPA2 (IEEE 802.11i)
 WPA and WPA2 are methods for securing wireless networks, the former
 using IEEE 802.1X, and the latter using IEEE 802.11i. This software
 provides key negotiation with the WPA Authenticator, and controls
 association with IEEE 802.11i networks.
Homepage: http://w1.fi/wpa_supplicant/

Package: parprouted
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 72
Maintainer: Luciano Bello <luciano@debian.org>
Architecture: i386
Version: 0.70-1
Depends: libc6 (>= 2.7-1)
Description: transparent IP (Layer 3) proxy ARP bridging tool
 This is useful for creation of transparent firewalls and bridging
 networks with different MAC protocols. Also, unlike standard
 bridging, proxy ARP bridging allows to bridge Ethernet networks
 behind wireless nodes without using WDS or layer 2 bridging.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 484
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: all
Source: ncurses
Version: 5.7+20081213-1
Replaces: ncurses-term
Provides: ncurses-runtime
Depends: libncurses5
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 9d086188afcd9479ae96ff55dd6c1573
Description: basic terminal type definitions
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: ftp://invisible-island.net/ncurses/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 192
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Source: popt
Version: 1.14-4
Replaces: popt
Depends: libc6 (>= 2.7-1)
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 232
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: pam
Version: 1.0.1-5+lenny1
Replaces: libpam0g-util
Depends: libc6 (>= 2.7-1), debconf (>= 0.5) | debconf-2.0, libpam-runtime
Suggests: libpam-doc
Conflicts: libpam, libpam0 (<= 0.56-2)
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.
Homepage: http://pam.sourceforge.net/

Package: libpci3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: pciutils
Version: 1:3.0.0-6
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.7-1), zlib1g (>= 1:1.1.4)
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
 This package contains the libpci shared library files.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 64
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Source: libusb
Version: 2:0.1.12-13
Replaces: libusb0
Depends: libc6 (>= 2.7-1)
Conflicts: libccid (<< 0.9.2-3), libusb0
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 164
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux (2.13.1.1-1)
Version: 1:2.13.1.1-1
Depends: libc6 (>= 2.7-1)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: cal, col, colcrt, colrm, column, logger, renice,
 script, scriptreplay, ul, wall

Package: sqlite3
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 48
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Version: 3.5.9-6
Depends: libc6 (>= 2.7-1), libreadline5 (>= 5.2), libsqlite3-0 (= 3.5.9-6)
Suggests: sqlite3-doc
Description: A command line interface for SQLite 3
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.

Package: update-inetd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 120
Maintainer: Luk Claes <luk@debian.org>
Architecture: all
Version: 4.31
Depends: debconf | debconf-2.0
Conflicts: netbase (<< 4.27)
Description: inetd configuration file updater
 This package provides a program used by other packages to
 automatically update /etc/inetd.conf, the configuration file shared
 by all implementations of the Internet super-server.

Package: libssl0.9.8
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 6796
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: i386
Source: openssl
Version: 0.9.8g-15+lenny1.ocf
Depends: libc6 (>= 2.3), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Conflicts: libssl, libssl096-dev (<< 0.9.6-2), openssl (<< 0.9.6-2), ssleay (<< 0.9.2b)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 480
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: ncurses
Version: 5.7+20081213-1
Provides: tput
Pre-Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3)
Conflicts: ncurses, tput
Description: terminal-related programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: ftp://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4089
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: i386
Source: perl
Version: 5.10.0-19
Replaces: libclass-multimethods-perl (<< 1.70-4), libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libxsloader-perl, perl (<= 5.10.0-9), perl-modules (<< 5.10.0-12)
Provides: libscalar-list-utils-perl, libxsloader-perl, perl5-base, perlapi-5.10.0
Pre-Depends: libc6 (>= 2.7-1), dpkg (>= 1.14.20)
Suggests: perl
Conflicts: autoconf2.13 (<< 2.13-45), findimagedupes (<< 2.11-2), icheck (<< 0.9.7-6.1), libcflow-perl (<< 1:0.68-11.1), libclass-methodmaker-perl (<< 2.10-1), libclearsilver-perl (<< 0.10.4-1.1), libcrypt-openssl-bignum-perl (<< 0.04-1), libcrypt-openssl-dsa-perl (<< 0.13-3), libcrypt-openssl-random-perl (<< 0.04-1), libcrypt-openssl-rsa-perl (<< 0.25-1), libhamlib2-perl (<< 1.2.6.2-6), libqt-perl (<< 3.008-3), libscalar-list-utils-perl (<< 1:1.18-1), libsufary-perl (<< 2.1.1-8), libsys-cpu-perl (<< 0.40-2.1), libterm-size-perl (<< 0.2-4), libvideo-ivtv-perl (<< 0.13-6), libxsloader-perl (<< 0.08-1), megahal (<< 9.1.1a-5), razor (<< 1:2.84-6)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 260
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Source: sysvinit
Version: 2.86.ds1-61
Replaces: file-rc, sysvinit (<< 2.85-1)
Recommends: lsb-base (>= 3.0-6)
Suggests: sysv-rc-conf, bum
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, shutting down and changing runlevels,
 configured through symbolic links in /etc/rc?.d/.

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 5128
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Version: 0.7.20.2+lenny1
Replaces: libapt-pkg-dev (<< 0.3.7), libapt-pkg-doc (<< 0.3.7)
Provides: libapt-pkg-libc6.7-6-4.6
Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), debian-archive-keyring
Suggests: aptitude | synaptic | gnome-apt | wajig, dpkg-dev, apt-doc, bzip2, lzma, python-apt
Conffiles:
 /etc/cron.daily/apt 391511e1366294546d1e539a051787ef
 /etc/apt/apt.conf.d/01autoremove 5871ab6ca11689c4d7e7beac5eb9ffdc
 /etc/logrotate.d/apt 172476f0940b1793f6190ed60031871a
Description: Advanced front-end for dpkg
 This is Debian's next generation front-end for the dpkg package manager.
 It provides the apt-get utility and APT dselect method that provides a
 simpler, safer way to install and upgrade packages.
 .
 APT features complete installation ordering, multiple source capability
 and several other unique features, see the Users Guide in apt-doc.

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 696
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 1:3.0.0-6
Depends: libc6 (>= 2.7-1), libpci3 (= 1:3.0.0-6)
Suggests: bzip2, wget | curl | lynx
Description: Linux PCI Utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: grub-common
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 312
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: i386
Source: grub2
Version: 1.96+20080724-16
Replaces: grub-efi (<< 1.96+20080426-3), grub-ieee1275 (<< 1.96+20080426-3), grub-linuxbios (<< 1.96+20080426-3), grub-pc (<< 1.96+20080426-3)
Depends: libc6 (>= 2.7-1), base-files (>= 4.0.1~)
Suggests: multiboot-doc
Description: GRand Unified Bootloader, version 2 (common files)
 This package contains common files shared by the distinct flavours of GRUB.
Homepage: http://www.gnu.org/software/grub/grub-2.en.html

Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 628
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq
Version: 2.45-1
Depends: libc6 (>= 2.7-1), libdbus-1-3 (>= 1.1.1)
Conflicts: dnsmasq (<< 2.41)
Description: A small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: madwifi-tools
Status: install ok installed
Priority: optional
Section: contrib/net
Installed-Size: 240
Maintainer: Debian madwifi team <pkg-madwifi-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1:0.9.4+r3685.20080531+dfsg-1
Depends: libc6 (>= 2.7-1)
Conffiles:
 /etc/modprobe.d/madwifi 7e9da1a8d0b5c94150ceccd901ba15fb
 /etc/network/if-pre-up.d/050madwifi 76574deffa95f2cbdd06a16e9aaa2ad7
 /etc/network/if-post-down.d/z50madwifi 694fb3f5f29dd72f6855cc1cba18e66f
Description: tools for the Multiband Atheros Driver for WiFi
 This package provides userspace tools for the madwifi driver. The tools are
 required to use and manipulate the madwifi interfaces present in a system.
Homepage: http://madwifi.org/

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 96
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Version: 4.34
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Conflicts: inetutils-inetd (<< 2:1.4.3+20060719-3), openbsd-inetd (<< 0.20050402-3)
Conffiles:
 /etc/services b92ef61d6606c6589df9c2c406632457
 /etc/init.d/networking 30271f4172a8d4dabe0698a99341a6b9
 /etc/protocols 3aaa310b088fa84233d7fb2e358d4d29
 /etc/rpc f0b6f6352bf886623adc04183120f83b
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libmagic1
Status: deinstall ok config-files
Priority: standard
Section: libs
Installed-Size: 2412
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: file
Version: 4.26-1
Config-Version: 4.26-1
Depends: libc6 (>= 2.7-1), zlib1g (>= 1:1.1.4)
Suggests: file
Description: File type determination library using "magic" numbers
 This library can be used to classify files according to magic number tests. It
 implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 252
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: i386
Source: libsepol
Version: 2.0.30-2
Depends: libc6 (>= 2.7-1)
Description: Security Enhanced Linux policy library for changing policy binaries
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.

Package: libpam-modules
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 884
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: pam
Version: 1.0.1-5+lenny1
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libc6 (>= 2.7-1), libdb4.6, libpam0g (>= 0.99.7.1), libselinux1 (>= 2.0.59), debconf (>= 0.5) | debconf-2.0
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask, libpam0g-modules (= 0.66-1), suidmanager (<< 0.50)
Conffiles:
 /etc/security/namespace.conf c600fa5899cfb3198a01dfba2bf281f3
 /etc/security/group.conf 5a6bd21801df034da8d64b407470e8f6
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf c23fcbb29dda6c1499e6a5e5ade0265e
 /etc/security/limits.conf 51ff3682f563db58be94b9d323cd82fa
 /etc/security/pam_env.conf ed3f430e418ad366ddb23307a8755249
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/namespace.init c8d87e9bcc05ef2725cbf7c69f40ef97
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix_*.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: tzdata
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 6272
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Version: 2009g-0lenny1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-lenny
Depends: debconf | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 144
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: i386
Version: 0.6.8+nmu1
Replaces: netbase (<< 4.00)
Depends: net-tools, libc6 (>= 2.7-1), lsb-base
Suggests: iproute, dhcp3-client | dhcp-client, ppp
Conffiles:
 /etc/init.d/ifupdown-clean 8714629a86cdb405dfd451f066d68fe5
 /etc/init.d/ifupdown 346208729633adf45e2fa3f2bd3b19c6
 /etc/default/ifupdown fab851ca87c5deb9d6f665e610184648
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: debconf-english
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 20
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.24
Depends: debconf
Conflicts: debconf-i18n
Description: small footprint English-only debconf
 This package is an alternative to the debconf-i18n package, intended for
 systems that are administered only in English, and low-footprint systems.
 If you install this package, debconf will not work properly in other
 languages, but you'll save half a megabyte of disk space.

Package: madwifi-modules-2.6.26-486-voyage
Status: install ok installed
Priority: optional
Section: non-free/net
Installed-Size: 980
Maintainer: Debian madwifi team <pkg-madwifi-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: madwifi (1:0.9.4+r4022.20090513-1)
Version: 1:0.9.4+r4022.20090513-1+6.0-3
Depends: madwifi-tools (>= 1:0.9.4~rc2+dfsg-1)
Recommends: wireless-tools, linux-image-2.6.26-486-voyage
Description: modules for the Multiband Atheros Driver for WiFi (kernel 2.6.26-486-voyage)
 This package contains the set of loadable kernel modules for Atheros
 based WiFi chipsets.
 .
 This package contains the compiled kernel modules for 2.6.26-486-voyage
 .
 If you have compiled your own kernel, you will most likely need to build
 your own madwifi-modules. The madwifi-source package has been
 provided for use with the Debian's module-assistant or kernel-package
 utilities to produce a version of madwifi-ng-module for your kernel.

Package: mbr
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 92
Maintainer: Santiago Garcia Mantinan <manty@debian.org>
Architecture: i386
Version: 1.1.10-2
Depends: libc6 (>= 2.7-1)
Description: Master Boot Record for IBM-PC compatible computers.
 The MBR is used in booting operating systems from the hard disk. It
 runs first, then transfers control to the operating system's loader
 which transfers control to the kernel.

Package: live-initramfs
Status: deinstall ok config-files
Priority: optional
Section: misc
Installed-Size: 444
Maintainer: Debian Live <debian-live@lists.debian.org>
Architecture: all
Version: 1.156.1+1.157.2-1
Config-Version: 1.156.1+1.157.2-1
Depends: busybox, file, initramfs-tools, sudo, udev, user-setup
Recommends: cryptsetup, eject, uuid-runtime, wget
Suggests: loop-aes-utils, curlftpfs, genext2fs (>= 1.4.1), httpfs2, squashfs-tools, mtd-tools
Conffiles:
 /etc/init.d/live-initramfs 57a1c9896d7c73e28285b6787376c6f5
 /etc/live.conf 97f89126ab691f5b86aaceec270b7936
Description: Debian Live initramfs hook
 live-initramfs is a hook for the initramfs-tools, used to generate a initramfs
 capable to boot live systems, such as those created by live-helper. This
 includes the Debian Live isos, netboot tarballs, and usb stick images.
 .
 At boot time it will look for a (read-only) media containing a "/live"
 directory where a root filesystems (often a compressed filesystem image like
 squashfs) is stored. If found, it will create a writable environment, using
 aufs or unionfs, for Debian like systems to boot from.
 .
 You probably do not want to install this package onto a non-live system,
 although it will do no harm.
 .
 live-initramfs is a fork of casper <http://packages.ubuntu.com/casper/>.
Homepage: http://debian-live.alioth.debian.org/

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2224
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.20-1
Replaces: cpio
Pre-Depends: libc6 (>= 2.7-1)
Suggests: bzip2, ncompress
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: file
Status: deinstall ok config-files
Priority: standard
Section: utils
Installed-Size: 136
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Version: 4.26-1
Config-Version: 4.26-1
Depends: libc6 (>= 2.7-1), libmagic1 (= 4.26-1), zlib1g (>= 1:1.1.4)
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Determines file type using "magic" numbers
 File tests each argument in an attempt to classify it. There are three sets of
 tests, performed in this order: filesystem tests, magic number tests, and
 language tests. The first test that succeeds causes the file type to be
 printed.
 .
 Starting with version 4, the file command is not much more than a wrapper
 around the "magic" library.
Homepage: http://www.darwinsys.com/file/

Package: watchdog
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 276
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: i386
Version: 5.4-10
Depends: libc6 (>= 2.7-1), debconf (>= 0.5) | debconf-2.0, makedev (>= 2.3.1-24) | udev
Conffiles:
 /etc/init.d/watchdog fd236b3f0a079cacba9b10cff14c55a2
 /etc/init.d/wd_keepalive 0bcede7fcca83b300ce8c26418b9bc16
 /etc/watchdog.conf 07869059528f7fb4a2a77a124fd1e097
Description: A software watchdog
 The watchdog program writes to /dev/watchdog every ten seconds.  If
 the device is opened but not written to within a minute, the machine
 will reboot. This feature is available when the kernel is built with
 'software watchdog' support (standard in Debian kernels).
 .
 The ability to reboot will depend on the state of the machine
 and interrupts.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 128
Maintainer: Mark Brown <broonie@debian.org>
Architecture: i386
Source: zlib
Version: 1:1.2.3.3.dfsg-12
Provides: libz1
Depends: libc6 (>= 2.7-1)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 944
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Version: 3.110
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 527e6a57d0bc9f7c1b1aca2071f3da00
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: aufs-modules-2.6.26-486-voyage
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 204
Maintainer: Julian Andres Klode <jak@jak-linux.org>
Architecture: i386
Source: aufs (0+20080719-4)
Version: 0+20080719-4+6.0-3
Provides: aufs-modules
Depends: linux-modules-2.6.26-486-voyage | linux-image-2.6.26-486-voyage
Description: aufs modules for Linux (kernel 2.6.26-486-voyage).
 This package contains the set of loadable kernel modules for the
 Another UnionFS
 .
 This package contains the compiled kernel modules for 2.6.26-486-voyage
 .
 If you have compiled your own kernel, you will most likely need to build
 your own aufs-modules. The aufs-source package has been
 provided for use with the Debian's module-assistant or kernel-package
 utilities to produce a version of aufs-modules for your kernel.

Package: iptraf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 736
Maintainer: Frederic Peters <fpeters@debian.org>
Architecture: i386
Version: 3.0.0-6
Depends: libc6 (>= 2.6.1-1), libncurses5 (>= 5.6)
Conffiles:
 /etc/logrotate.d/iptraf 6627fbb377f40ec46f7b8fddebd18be2
Description: Interactive Colorful IP LAN Monitor
 IPTraf is an ncurses-based IP LAN monitor that generates
 various network statistics including TCP info, UDP counts,
 ICMP and OSPF information, Ethernet load info, node stats,
 IP checksum errors, and others.

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 168
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Version: 2.0.11-2
Depends: libc6 (>= 2.7-1)
Conflicts: tcptraceroute (<< 1.5beta6-2.1), traceproto (<< 1.1.2beta1-3), traceroute-nanog (<< 6.4.2-1)
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: http://traceroute.sourceforge.net/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 88
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.3 (4.3.2-1.1)
Version: 1:4.3.2-1.1
Depends: gcc-4.3-base (= 4.3.2-1.1), libc6 (>= 2.7-1)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: nocatsplash
Status: install ok installed
Priority: optional
Section: main
Installed-Size: 240
Maintainer: root <punkytse@yahoo.com>
Architecture: i386
Version: 0.92-3
Depends: libc6 (>= 2.7-1), libglib1.2ldbl (>= 1.2.10-18)
Conffiles:
 /etc/nocat.conf f189ea9678074ccc42d92e9b71c77c8c
 /etc/default/nocatsplash c7c5addfa0a8e0517461151b3cda53dc
 /etc/init.d/nocatsplash 301851466bc9daea6e30c9e099658348
Description: gateway daemon for open public network
 NoCatSplash is a Open Public Network Gateway Daemon.  It performs as a
 [captive/open/active] portal.  When run on a gateway/router on a network,
 all web requests are redirected until the client either logs in or clicks
 "I Accept" to an AUP. The gateway daemon then changes the firewall rules
 on the gateway to pass traffic for that client (based on IP address and
 MAC address).

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: maximilian attems <maks@debian.org>
Architecture: i386
Source: klibc
Version: 1.5.12-2
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.

Package: grub
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 852
Maintainer: Grub Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: i386
Version: 0.97-47lenny2
Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3), grub-common
Suggests: grub-legacy-doc, multiboot-doc, mdadm
Description: GRand Unified Bootloader (Legacy version)
 GRUB is a GPLed bootloader intended to unify bootloading across x86
 operating systems.  In addition to loading the Linux kernel,
 it implements the Multiboot standard, which allows for flexible loading
 of multiple boot images (needed for modular kernels such as the GNU Hurd).
 .
 Please note that GRUB Legacy is in maintainance mode and new features are
 only accepted in GRUB 2 (grub-pc package).

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 432
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 5lenny3
Replaces: base, miscutils
Provides: base
Depends: base-passwd (>= 2.0.3.4)
Pre-Depends: awk
Conffiles:
 /etc/debian_version 21a26df8a041c35a80e286469f0f2e1e
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue edb0ea17af38ba3b17ef5b4432f5d77e
 /etc/issue.net 07a99351557dacab4d4d15c8de0fcf6c
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 312
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.13.1.1-1
Pre-Depends: libblkid1 (>= 1.37-1), libc6 (>= 2.7-1), libselinux1 (>= 2.0.59), libuuid1
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: pcmciautils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 84
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 014-4
Depends: module-init-tools (>= 3.2.2), lsb-base (>= 3.0-6), libc6 (>= 2.6-1), libsysfs2
Recommends: udev
Suggests: wireless-tools
Conffiles:
 /etc/udev/pcmcia.rules d94fb0469e3665ce44703c8bd85899b9
 /etc/init.d/pcmciautils b70d433aa3a6ed17d283daf62c5bfe31
Description: PCMCIA utilities for Linux 2.6
 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
 later, replacing the old pcmcia-cs tools used with earlier kernel versions.
 PCMCIA cards are commonly used in laptops to provide expanded capabilities
 such as network connections, modems, increased memory, etc.
 .
 To use PCMCIA you need to have kernel modules available to support
 it. These are included in the stock Debian 2.6 kernel packages. You
 will most likely also need udev, although it isn't always required.
 .
 The wireless-tools package is required by many wireless network adapters.

Package: libsqlite3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 468
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Source: sqlite3
Version: 3.5.9-6
Depends: libc6 (>= 2.7-1)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.

Package: libtext-iconv-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: aufs-tools
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 284
Maintainer: Julian Andres Klode <jak@jak-linux.org>
Architecture: i386
Source: aufs
Version: 0+20080719-4
Depends: libc6 (>= 2.7-1)
Description: Tools to manage aufs filesystems
 The aufs driver provides a unification file system for the Linux kernel. It
 allows to virtually merge the contents of several directories and/or stack
 them, so that apparent file changes in the aufs end in file changes in only
 one of the source directories.
 .
 This package contains utilities needed to configure aufs containers
 on-the-fly.
Homepage: http://aufs.sourceforge.net/

Package: hostapd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 604
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: i386
Version: 1:0.5.10-1
Depends: libc6 (>= 2.7-1), libssl0.9.8 (>= 0.9.8f-5), lsb-base (>= 3.0-3)
Conffiles:
 /etc/hostapd/ifupdown.sh 2149a257f241e0ed5971c0fce90c021a
 /etc/hostapd/hostapd.conf 1a8a37fc87ff57827e17f70c8255a99b
 /etc/default/hostapd 5bdc055049b94234f9c6165ac86d4971
 /etc/init.d/hostapd fba1880cd7ed39e51c6e630d98c25505
Description: user space IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
 Originally, hostapd was an optional user space component for Host AP
 driver. It adds more features to the basic IEEE 802.11 management
 included in the kernel driver: using external RADIUS authentication
 server for MAC address based access control, IEEE 802.1X Authenticator
 and dynamic WEP keying, RADIUS accounting, WPA/WPA2 (IEEE 802.11i/RSN)
 Authenticator and dynamic TKIP/CCMP keying.
 .
 The current version includes support for other drivers, an integrated
 EAP authenticator (i.e., allow full authentication without requiring
 an external RADIUS authentication server), and RADIUS authentication
 server for EAP authentication.
 .
 hostapd works with the following drivers:
 .
  * Host AP driver for Prism2/2.5/3,
  * Prism54 driver for Intersil/Conexant Prism GT/Duette/Indigo,
  * madwifi driver for cards based on Atheros chip set (ar521x),
  * Any wired Ethernet driver for wired IEEE 802.1X authentication.
Homepage: http://w1.fi/

Package: libreadline5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 320
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Source: readline5
Version: 5.2-3.1
Depends: readline-common, libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 584
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: ncurses
Version: 5.7+20081213-1
Depends: libc6 (>= 2.7-1)
Recommends: libgpm2
Description: shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: ftp://invisible-island.net/ncurses/

Package: portmap
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 112
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 6.0-9
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.7-1), libwrap0 (>= 7.6-4~), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 1.3-9)
Conflicts: sysv-rc (<< 2.86.ds1-59)
Conffiles:
 /etc/init.d/portmap f6b43716edf18612874be916dbe57b05
Description: RPC port mapper
 Portmap is a server that converts RPC (Remote Procedure Call) program
 numbers into DARPA protocol port numbers. It must be running in order
 to make RPC calls.
 .
 Services that use RPC include NFS and NIS.
Homepage: http://neil.brown.name/portmap/

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 588
Maintainer: Paul Slootman <paul@debian.org>
Architecture: i386
Version: 3.0.3-2
Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.7-1), libpopt0 (>= 1.14), lsb-base (>= 3.0), base-files (>= 4.0.1)
Suggests: openssh-client, openssh-server
Conffiles:
 /etc/default/rsync 126a5f9d12d57da27b95192fed269ad5
 /etc/init.d/rsync 9e90dd1e11d5a1497ce5ac122c1e5edf
Description: fast remote file copy program (like rcp)
 rsync is a program that allows files to be copied to and from remote
 machines in much the same way as rcp.  It has many more options than
 rcp, and uses the rsync remote-update protocol to greatly speed up
 file transfers when the destination file already exists.
 .
 The rsync remote-update protocol allows rsync to transfer just the
 differences between two sets of files across the network link.
 .
 This package also includes rsyncd daemon functionality.

Package: bcrelay
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 68
Maintainer: Rene Mayrhofer <rmayr@debian.org>
Architecture: i386
Source: pptpd
Version: 1.3.4-2.1
Replaces: pptpd (<< 1.2.3-1)
Depends: libc6 (>= 2.7-1)
Description: Broadcast relay daemon
 The bcrelay daemon relays broadcasts between two interfaces. It is shipped
 with the pptpd package, but can be used for other purposes.

Package: ppp
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 900
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 2.4.4rel-10.1
Replaces: ppp-pam, ppp-udeb
Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1), libpcap0.8 (>= 0.9.3-1), libpam-modules, libpam-runtime (>= 0.76-13.1), netbase, procps
Suggests: iptables
Conflicts: makedev (<< 2.3.1-56), ppp-pam, ppp-udeb, pppdcapiplugin (<= 1:3.7.2005-07-09-2)
Conffiles:
 /etc/bash_completion.d/pon 41cf8cde5bd9fefe51100a051947b118
 /etc/apm/event.d/ppp c894b205a1638f6fbb7bb477c8d253b6
 /etc/ppp/ip-up.d/0000usepeerdns 47b1eee2bd4e9e492ad5a9f5870ca272
 /etc/ppp/ip-down.d/0000usepeerdns 71822da78b9163dfbcb6f1bbd662b9b6
 /etc/ppp/options 05bc845e4e5e6b3645666418237ad489
 /etc/ppp/ip-up 612431b1564d97e3925bc692079aabdb
 /etc/ppp/ip-down 7a44bcdb7d4a0920669b496bb4d007b5
 /etc/ppp/ipv6-up 02838ef669ec30a3a6afef7b1ce7ecc9
 /etc/ppp/ipv6-down 831796b566df95e0d5143ca6b35f082d
 /etc/chatscripts/pap 17dbbede1dc894aa6c6c4e8be5727c1d
 /etc/logrotate.d/ppp 8434ebaff1b3b33bb0ea0bce523adfd3
 /etc/init.d/pppd-dns 891baf2956f72a668c2be632e11641a2
 /etc/pam.d/ppp cc163be3dbe4258e639238ccd5bcdea0
Description: Point-to-Point Protocol (PPP) - daemon
 The Point-to-Point Protocol provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link to negotiate various optional characteristics
 of the link.
 .
 This package is most commonly used to manage a modem for dial-up or
 certain kinds of broadband connections.

Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: keyutils
Version: 1.2-9
Depends: libc6 (>= 2.7-1)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 92
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Version: 3.7.1-5
Depends: libc6 (>= 2.7-1), libpopt0 (>= 1.14), libselinux1 (>= 2.0.59), cron | anacron | fcron, base-passwd (>= 2.0.3.4)
Recommends: mailx
Conffiles:
 /etc/logrotate.conf 176edd439a499501372cf3d04e795810
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.

Package: iproute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 920
Maintainer: Debian iproute maintainers <ah-iproute@debian.org>
Architecture: i386
Version: 20080725-2
Provides: arpd
Depends: libc6 (>= 2.7-1), libdb4.6
Recommends: libatm1
Suggests: iproute-doc
Conflicts: arpd
Conffiles:
 /etc/iproute2/rt_dsfield da0ef3e6e9880e6ee4d64782cb4a5fcf
 /etc/iproute2/ematch_map 0b9befbbbee4b415319b8070f18b9b88
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_protos 83da07a831e71eb4f6dfaec3d27de345
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
Description: networking and traffic control tools
 The iproute suite, also known as iproute2, is a collection of
 utilities for networking and traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2

Package: arptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 72
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Version: 0.0.3.3-1
Depends: libc6 (>= 2.7-1)
Description: ARP table administration
 Arptables is used to set up, maintain, and inspect the tables of
 ARP rules in the Linux kernel. It is analogous to iptables,
 but operates at the ARP layer rather than the IP layer.

Package: voyage-util
Status: install ok installed
Priority: optional
Section: main
Installed-Size: 244
Maintainer: Punky Tse <punkytse@yahoo.com>
Architecture: all
Version: 0.6-3
Conffiles:
 /etc/init.d/voyage-pxe 9709ff46cb4438d1e171c20ab865f1ed
 /etc/init.d/voyage-sync 37c13c16264961c6c86780e494863abe
 /etc/init.d/voyage-util ae1c5cda597361bee8473b06db1ffdec
 /etc/dnsmasq.more.conf 94e24e01f91611d18a2e2cd785ceb33a
 /etc/voyage.conf 996ef22563a8348a0ded95170e255cd2
 /etc/motd.voyage 57247d3767fad2f572dca035057004da
 /etc/bash_completion.d/trafmon 2ca75fd6122a6272066513254bac7514
 /etc/voyage-profiles/genericpc.pro 9aa711fe8dde09f47569b62f028fbf11
 /etc/voyage-profiles/notebook.pro 58c9e41216eb1d09cdea1c65a73100fa
 /etc/voyage-profiles/4501.pro 90e54321cb3994fed9595efa44c0baad
 /etc/voyage-profiles/wrap.pro 2f6aa41819b0202ba2c55fbb05bc47ab
 /etc/voyage-profiles/4511.pro 02707ac105c06377af9b0da0103a9718
 /etc/voyage-profiles/alix.pro c9ffe6afa592ef9b0d01e0f856a12e97
 /etc/voyage-profiles/5501.pro 171d3b68e8ed44b32b5a0884d9fe2acf
 /etc/voyage-profiles/4801.pro 32bb848c53f0241ba9f3bc50ff5bb036
 /etc/default/voyage-util 66e72dbd32f4684f20d11f79f54a20e4
Description: This debian package contains all useful scripts for installing
 and configurating voyage linix distribution.

Package: iperf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 152
Maintainer: Roberto Lumbreras <rover@debian.org>
Architecture: i386
Version: 2.0.4-1
Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1-21), libstdc++6 (>= 4.1.1-21)
Description: Internet Protocol bandwidth measuring tool
 Iperf is a modern alternative for measuring TCP and UDP bandwidth performance,
 allowing the tuning of various parameters and characteristics.
 .
 Features:
    * Measure bandwidth, packet loss, delay jitter
    * Report MSS/MTU size and observed read sizes.
    * Support for TCP window size via socket buffers.
    * Multi-threaded. Client and server can have multiple simultaneous
      connections.
    * Client can create UDP streams of specified bandwidth.
    * Multicast and IPv6 capable.
    * Options can be specified with K (kilo-) and M (mega-) suffices.
    * Can run for specified time, rather than a set amount of data to transfer.
    * Picks the best units for the size of data being reported.
    * Server handles multiple connections.
    * Print periodic, intermediate bandwidth, jitter, and loss reports at
      specified intervals.
    * Server can be run as a daemon.
    * Use representative streams to test out how link layer compression affects
      your achievable bandwidth.

Package: libdevmapper1.02.1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 136
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: devmapper
Version: 2:1.02.27-4
Provides: libdevmapper
Depends: libc6 (>= 2.7-1), libselinux1 (>= 2.0.59)
Description: The Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 36
Maintainer: Nathan Scott <nathans@debian.org>
Architecture: i386
Source: attr
Version: 1:2.4.43-2
Depends: libc6 (>= 2.7-1)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://oss.sgi.com/projects/xfs/

Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 212
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Source: libpcap
Version: 0.9.8-5
Depends: libc6 (>= 2.7-1)
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, we've created this system-independent API to ease in
 porting and to alleviate the need for several system-dependent packet
 capture modules in each application.
Homepage: http://www.tcpdump.org/

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 628
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 4.1.5-6
Replaces: ssed (<< 3.59)
Pre-Depends: libc6 (>= 2.7-1)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: libatm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Peter De Schrijver (p2) <p2@mind.be>
Architecture: i386
Source: linux-atm
Version: 2.4.1-17.2
Depends: libc6 (>= 2.7-1)
Conflicts: atm-tools (<< 2.4.1-6)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
 .
 Homepage: http://linux-atm.sourceforge.net/

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 616
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Version: 3.9.8-4
Depends: libc6 (>= 2.7-1), libpcap0.8 (>= 0.9.3-1), libssl0.9.8 (>= 0.9.8f-5)
Description: A powerful tool for network monitoring and data acquisition
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect "ping attacks"
 or to monitor network activities.
Homepage: http://www.tcpdump.org/

Package: squashfs-modules-2.6.26-486-voyage
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 108
Maintainer: Arnaud Fontaine <arnau@debian.org>
Architecture: i386
Source: squashfs (1:3.3-7)
Version: 1:3.3-7+6.0-3
Provides: squashfs-modules
Depends: linux-modules-2.6.26-486-voyage | linux-image-2.6.26-486-voyage
Description: Squash filesystem support for Debian Linux kernels
 Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib
 compression to compress both files, inodes and directories. Inodes in the
 system are very small and all blocks are packed to minimise data overhead.
 Block sizes greater than 4K are supported up to a maximum of 64K.
 .
 Squashfs is intended for general read-only filesystem use, for archival use
 (e.g. in cases where a .tar.gz file may be used), and in constrained block
 device/memory systems (e.g. embedded systems) where low overhead is needed.
 .
 This package contains the compiled kernel module for 2.6.26-486-voyage
Homepage: http://squashfs.sourceforge.net/

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 408
Maintainer: maximilian attems <maks@debian.org>
Architecture: i386
Source: klibc
Version: 1.5.12-2
Depends: libklibc (= 1.5.12-2)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 284
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.41.3-1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.7-1), libcomerr2 (>= 1.01)
Description: ext2 filesystem libraries
 The ext2fs and e2p libraries are used by programs that directly access
 EXT2 filesystems from usermode programs.   The EXT2 filesystem is very often
 used as the default filesystem on Linux systems.   Various system programs
 that use libext2fs include e2fsck, mke2fs, tune2fs, etc.  Programs that use
 libe2p include dumpe2fs, chattr, and lsattr.

Package: inetutils-syslogd
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 228
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: i386
Source: inetutils
Version: 2:1.5.dfsg.1-9
Replaces: syslogd
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.7-1), netbase, lsb-base
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/default/inetutils-syslogd 318b7f01be4b1e31c3758bf94f7c3fe9
 /etc/logrotate.d/inetutils-syslogd fda99723c1e6f916bc693547409c91d8
 /etc/init.d/inetutils-syslogd b539c101361f82c832efb91f25238717
 /etc/syslog.conf f732a7a038ca5eef05be22dd03c11503
Description: system logging daemon
 The syslog daemon is responsible for providing logging of messages
 received from programs and facilities on the local host as well as
 from remote hosts.
Homepage: http://www.gnu.org/software/inetutils/

Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 1568
Maintainer: Noèl Köthe <noel@debian.org>
Architecture: i386
Version: 1.11.4-2
Depends: libc6 (>= 2.7-1), libssl0.9.8 (>= 0.9.8f-5)
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc eeb265c23bdeb037d384e2da9ccb82a2
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the Web
 using http(s) and ftp, the two most widely used Internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as ftp
 sites -- you can use wget to make mirrors of archives and
 home pages or to travel the Web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both http and ftp) that support it. Both http and ftp
 retrievals can be time stamped, so wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
 .
 http://www.gnu.org/software/wget/
Homepage: http://www.gnu.org/software/wget/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 184
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 3.5.20
Replaces: base
Depends: libc6 (>= 2.7-1)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 96
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.41.3-1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.7-1)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

Package: mawk
Status: install ok installed
Priority: required
Section: base
Installed-Size: 224
Maintainer: James Troup <james@nocrew.org>
Architecture: i386
Version: 1.3.3-11.1
Provides: awk
Pre-Depends: libc6 (>= 2.7-1)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 4892
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: i386
Version: 1.4.9-3+lenny1
Depends: libbz2-1.0, libc6 (>= 2.7-1), libreadline5 (>= 5.2), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), gpgv
Recommends: libldap-2.4-2 (>= 2.4.7)
Suggests: gnupg-doc, xloadimage | imagemagick | eog, libpcsclite1
Conflicts: seahorse (<< 2.22.2-2)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 GnuPG does not use any patented algorithms so it cannot be compatible
 with PGP2 because it uses IDEA (which is patented worldwide).
Homepage: http://www.gnupg.org

Package: libdb4.6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1248
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Source: db4.6
Version: 4.6.21-11
Depends: libc6 (>= 2.7-1)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.6 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.6 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 820
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1.60-22
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.7-1)
Conflicts: ja-trans (<= 0.8-2)
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".

Package: debconf-i18n
Status: purge ok not-installed
Priority: important
Section: admin

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1180
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 2.5.3~dfsg-6
Provides: rgrep
Pre-Depends: libc6 (>= 2.7-1)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: libiw29
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 60
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Source: wireless-tools
Version: 29-1.1
Depends: libc6 (>= 2.7-1)
Description: Wireless tools - library
 Wireless tools are used to manipulate the Linux Wireless Extensions. The
 Wireless Extension is an interface allowing you to set Wireless LAN specific
 parameters and get the specific stats.
 .
 This package contains the dynamic library libiw.

Package: gcc-4.2-base
Status: purge ok not-installed
Priority: required
Section: libs

Package: ebtables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 240
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Version: 2.0.8.2-4
Depends: libc6 (>= 2.7-1)
Recommends: iptables
Conffiles:
 /etc/ethertypes 94bffde8f75a1b8f891fb780bfe15ca2
 /etc/init.d/ebtables 2fa905905a24f358428b713e6708620b
 /etc/default/ebtables 4b49d534ccce3c32252e3ac080b8997a
Description: Ethernet bridge frame table administration
 Ebtables is used to set up, maintain, and inspect the tables of
 Ethernet frame rules in the Linux kernel. It is analogous to iptables,
 but operates at the MAC layer rather than the IP layer.

Package: conntrack
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 56
Maintainer: netfilter maintainers <netfilter-maintainers@ned.snow-crash.org>
Architecture: i386
Version: 1:0.9.6-4
Depends: libc6 (>= 2.7-1), libnetfilter-conntrack1 (>= 0.0.89), libnfnetlink0 (>= 0.0.33)
Description: Program to modify the conntrack tables
 conntrack is a userspace command line program targeted at system
 administrators. It enables them to view and manage the in-kernel
 connection tracking state table.
Homepage: http://people.netfilter.org/pablo/conntrack-tools/

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 448
Maintainer: Bash Completion Maintainers <bash-completion-devel@lists.alioth.debian.org>
Architecture: all
Version: 20080705
Replaces: bash (<< 3.1dfsg-9)
Depends: bash (>= 3.1dfsg-9)
Conffiles:
 /etc/bash_completion 82204653036cee93705cbf9fd9f0654d
Description: programmable completion for the bash shell
 bash completion extends bashs standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2108
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.1.1-6
Replaces: manpages-de (<< 0.4-9), manpages-es (<< 1.55-4), manpages-es-extra (<< 0.8a-15), manpages-fi (<< 0.2-4), manpages-fr (<< 1.64.0-1), manpages-hu (<< 20010119-5), manpages-it (<< 0.3.4-3), manpages-ja (<< 0.5.0.0.20050915-1), manpages-ko (<< 20050219-2), manpages-ru (<< 0.98-3), manpages-tr, manpages-zh
Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.0.59), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 84
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Version: 2.95
Pre-Depends: libc6 (>= 2.7-1)
Description: utility to set/show the host name or domain name
 The hostname command can be used to either set or display the current host or
 domain name of the system. This name is used by many of the networking programs
 to identify the machine. The domain name is also used by NIS/YP.

Package: libglib1.2ldbl
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 268
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: glib1.2
Version: 1.2.10-19
Replaces: libglib1.2
Depends: libc6 (>= 2.5-5)
Conflicts: libglib1.2
Description: The GLib library of C routines
 GLib is a library containing many useful C routines for things such as trees,
 hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but
 has been split off as of version 1.1.0.

Package: libnetfilter-conntrack1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 124
Maintainer: netfilter maintainers <netfilter-maintainers@ned.snow-crash.org>
Architecture: i386
Source: libnetfilter-conntrack
Version: 0.0.96-1
Depends: libc6 (>= 2.7-1), libnfnetlink0 (>= 0.0.33)
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 48
Maintainer: Nathan Scott <nathans@debian.org>
Architecture: i386
Source: acl
Version: 2.2.47-2
Depends: libattr1 (>= 2.4.41-1), libc6 (>= 2.7-1)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://oss.sgi.com/projects/xfs/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 952
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Source: pam
Version: 1.0.1-5+lenny1
Replaces: libpam0g-dev, libpam0g-util
Conflicts: libpam0g (<< 0.66-0), libpam0g-util
Conffiles:
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: inetutils-ping
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 176
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: i386
Source: inetutils
Version: 2:1.5.dfsg.1-9
Provides: ping
Depends: libc6 (>= 2.7-1), netbase
Conflicts: hurd (<= 20010718-1), ping
Description: ICMP echo tool
 Ping uses ICMP to send out echo requests, and uses the reply packets to
 calculate latency between the sending and the destination hosts.
Homepage: http://www.gnu.org/software/inetutils/

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 276
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Version: 2.86.ds1-61
Depends: libc6 (>= 2.7-1), libselinux1 (>= 2.0.59), libsepol1 (>= 2.0.25)
Pre-Depends: initscripts, sysv-rc (>= 2.86.ds1-1.2) | file-rc (>> 0.7.0), sysvinit-utils
Description: System-V-like init utilities
 This package contains programs required for booting
 a Debian system and doing basic process management.
 .
 The most important program in the package is /sbin/init.
 It is the first process started on boot and continues
 to run as process number 1 until the system halts. All
 other processes are descended from it.

Package: libslang2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1104
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: i386
Source: slang2
Version: 2.1.3-3
Depends: libc6 (>= 2.7-1)
Recommends: libpng12-0
Description: The S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 388
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.86.ds1-61
Replaces: libc0.1, libc0.3, libc6, libc6.1, sysvinit (<< 2.85-12)
Depends: libc6 (>= 2.7-1), mount (>= 2.11x-1), e2fsprogs (>= 1.32+1.33-WIP-2003.04.14-1), debianutils (>= 2.13.1), lsb-base (>= 3.0-6), sysvinit-utils (>= 2.86.ds1-39)
Recommends: psmisc
Conflicts: insserv (<< 1.09.0-12), libdevmapper1.02.1 (<< 2:1.02.24-1), sysv-rc (<< 2.86.ds1-1.2), sysvinit (<< 2.86.ds1-12), udev (<< 0.080-1), usplash (<< 0.5.8-2)
Conffiles:
 /etc/init.d/bootlogd 8929bbe54d2e0bfc01002cdfc8d4a12d
 /etc/init.d/stop-bootlogd 601570469b070bd50596c362bbe24c69
 /etc/init.d/stop-bootlogd-single 3e911c125a472fd0ea0b72348ccd6fae
 /etc/init.d/bootmisc.sh 778c98dc5155a9d34bd3c36ef734f91a
 /etc/init.d/checkfs.sh 73141996e0b5f75a651f36a54fd8a195
 /etc/init.d/checkroot.sh 4a0ca4837e0d255dbe9ac4a6ad47e8b2
 /etc/init.d/halt 6ae1b3b1b8198567a5e32116077f12a2
 /etc/init.d/hostname.sh 1de2d410112a3ea21962879ba38ae46c
 /etc/init.d/killprocs f67bf1eb3237795e2ebce779c482c32f
 /etc/init.d/mountall.sh 7b379aa8e2d5eed3831b70cac72c1c8c
 /etc/init.d/mountall-bootclean.sh d4994c72205f718f3b369d4dc69e0b0e
 /etc/init.d/mountnfs.sh 08d30a08518f65de3dd466027d02ec5e
 /etc/init.d/mountnfs-bootclean.sh 6aa9a6a5bf53a33bc9d12bfb5e9f3c96
 /etc/init.d/mountoverflowtmp 99ae6af7d686bfbf48dec741172bab03
 /etc/init.d/mountdevsubfs.sh 23cf796a34b927758704eb0c12569ac0
 /etc/init.d/mountkernfs.sh 392dab751172d2e938c516dadb654c60
 /etc/init.d/mtab.sh b949c22869c7b5673b7b6d90d9362f38
 /etc/init.d/rc.local 86a81414c8a1230912e7204acd529ade
 /etc/init.d/reboot 1b9db1ef7bfd79b128ef85d5065721a6
 /etc/init.d/rmnologin e2a6046f67394c24302f7272654dfc7e
 /etc/init.d/sendsigs 80f76e4cc5a0b2860507a5ffb7e107b1
 /etc/init.d/single dc13cb373c5c098a8fb95424701373e3
 /etc/init.d/umountfs cd41e4d500876fd9ba651f5f02f19405
 /etc/init.d/umountnfs.sh 196fca8d7eb58b6ae8b8e28ac5cbe617
 /etc/init.d/umountroot 66ddb222052697f78d9942ffa35c7505
 /etc/init.d/urandom ce40619da442f275ab8928d71c594fe0
 /etc/default/bootlogd 70a108da715299a6e33470eb450669fb
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/tmpfs d959a98cfb571cd7fdfb36bbb3d0a5c8
 /etc/network/if-up.d/mountnfs c5b579c8803456c9982b5fecaab01e0b
Description: Scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 GNU/Linux system at boot time and finalize it at halt or
 reboot time.

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 124
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.41.3-1
Depends: libc6 (>= 2.7-1), libuuid1 (>= 1.05)
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 104
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.41.3-1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2 (>= 1.01), libc6 (>= 2.7-1)
Description: command-line interface parsing library
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 .
 It was originally inspired by the Multics SubSystem library.

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1512
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: i386
Version: 4.4.0-2
Pre-Depends: libc6 (>= 2.7-1)
Suggests: mlocate | locate | slocate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1960
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Version: 1.41.3-1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (>= 1.41.1), libblkid1 (>= 1.40), libc6 (>= 2.7-1), libcomerr2 (>= 1.34), libss2 (>= 1.34), libuuid1 (>= 1.15)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf 8e566c323a76392b107c8fe2e11cbd3b
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext-based file systems, and the generic fsck wrapper.

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 772
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: i386
Source: openssh
Version: 1:5.1p1-5
Replaces: openssh-client (<< 1:3.8.1p1-11), ssh, ssh-krb5
Provides: ssh-server
Depends: libc6 (>= 2.7-1), libcomerr2 (>= 1.01), libkrb53 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.0.59), libssl0.9.8 (>= 0.9.8g-9), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), openssh-client (= 1:5.1p1-5), lsb-base (>= 3.2-13), openssh-blacklist, procps
Recommends: xauth, openssh-blacklist-extra
Suggests: ssh-askpass, rssh, molly-guard
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7), ssh-nonfree (<< 2), ssh-socks, ssh2
Conffiles:
 /etc/init.d/ssh 8e23fc45b4abad24e9c1486f4e18c22e
 /etc/network/if-up.d/openssh-server 30ebc9d9bc92c2f333c173d58d4741c0
 /etc/pam.d/sshd 5ad89e19556206e750f3b096fbe9c6b3
 /etc/default/ssh ad73fe5f475b6ffe02115444ffe2a077
Description: secure shell server, an rshd replacement
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide applications with a secure communication channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.

Package: dnsmasq
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 108
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: all
Version: 2.45-1
Depends: netbase, adduser, dnsmasq-base
Suggests: resolvconf
Conflicts: resolvconf (<< 1.15)
Conffiles:
 /etc/init.d/dnsmasq 51c8d51f51306fa81306198efe59df4a
 /etc/default/dnsmasq 9c52bc7a6867e72755e69f50827311e0
 /etc/dnsmasq.conf ce2f61a445dce21f041e2d013be52fef
 /etc/resolvconf/update.d/dnsmasq 309b723e48c57a0a0a1219f420d3b78c
 /etc/dbus-1/system.d/dnsmasq.conf 9041f8e8a00d26b697a078adccf01157
Description: A small caching DNS proxy and DHCP/TFTP server
 Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP
 server. It is designed to provide DNS and optionally, DHCP, to a
 small network. It can serve the names of local machines which are
 not in the global DNS. The DHCP server integrates with the DNS
 server and allows machines with DHCP-allocated addresses
 to appear in the DNS with names configured either in each host or
 in a central configuration file. Dnsmasq supports static and dynamic
 DHCP leases and BOOTP/TFTP for network booting of diskless machines.

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 60
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Version: 2009.01.31
Depends: gnupg
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 284
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.3.12-6
Depends: debianutils (>= 1.6)
Pre-Depends: libc6 (>= 2.7-1)
Suggests: less
Description: The GNU compression utility
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 7272
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Version: 1.14.25
Replaces: manpages-de (<= 0.4-3), manpages-pl (<= 20051117-1)
Pre-Depends: libc6 (>= 2.7-1), coreutils (>= 5.93-1), lzma
Suggests: apt
Conflicts: apt (<< 0.7.7), aptitude (<< 0.4.7-1), dpkg-dev (<< 1.14.16), dpkg-iasearch (<< 0.11), sysvinit (<< 2.82-1)
Conffiles:
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/logrotate.d/dpkg 501f8c90b83c7ea180868ca82e1e82d1
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: http://wiki.debian.org/Teams/Dpkg

Package: liblocale-gettext-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: openssh-blacklist
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 4092
Maintainer: Kees Cook <kees@outflux.net>
Architecture: all
Version: 0.4.1
Pre-Depends: dpkg (>= 1.10.24)
Recommends: openssh-client
Description: list of default blacklisted OpenSSH RSA and DSA keys
 Contains the list of known-bad default OpenSSH keys, for ssh-vulnkeys to
 use when examining suspect keys: DSA-1024, RSA-2048

Package: diff
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 744
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Source: diffutils
Version: 2.8.1-12
Pre-Depends: libc6 (>= 2.5)
Suggests: diff-doc
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 92
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: bzip2
Version: 1.0.5-1
Depends: libc6 (>= 2.7-1)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: gcc-4.3-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 160
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.3
Version: 4.3.2-1.1
Replaces: cpp-4.3 (<< 4.3.2)
Description: The GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).

Package: wireless-tools
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 256
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Version: 29-1.1
Depends: libc6 (>= 2.7-1), libiw29 (>= 28+29pre7)
Conffiles:
 /etc/network/if-pre-up.d/wireless-tools e95ae0b172b744370a400140059d52d4
 /etc/network/if-post-down.d/wireless-tools 5ddd964cf276955df3353def88eb5268
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate
 the Linux Wireless Extensions. The Wireless Extension is an interface
 allowing you to set Wireless LAN specific parameters and get the
 specific stats.

Package: lilo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1100
Maintainer: William Pitcock <nenolod@dereferenced.org>
Architecture: i386
Version: 1:22.8-7
Depends: mbr, debconf (>= 1.2.9) | debconf-2.0, libc6 (>= 2.7-1), libdevmapper1.02.1 (>= 2:1.02.20)
Suggests: lilo-doc
Conflicts: manpages (<< 1.29-3)
Description: LInux LOader - The Classic OS loader can load Linux and others
 This package contains lilo (the installer) and boot-record-images to
 install Linux, OS/2, DOS and generic Boot Sectors of other OSes.
 .
 You can use LILO to manage your Master Boot Record (with a simple text screen,
 text menu or colorful splash graphics) or call LILO from other Boot-Loaders to
 jump-start the Linux kernel.

Package: pptpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 352
Maintainer: Rene Mayrhofer <rmayr@debian.org>
Architecture: i386
Version: 1.3.4-2.1
Depends: bcrelay, debconf | debconf-2.0, libc6 (>= 2.7-1), libwrap0, netbase, ppp (>= 2.4.4)
Conffiles:
 /etc/pptpd.conf 491b2f711244dd55849da1ec7bed51c1
 /etc/ppp/pptpd-options a3c6e8c72b5b360688d6d0df2768f689
 /etc/init.d/pptpd 2bfa86e4eb416e53b0289ea32d3b0817
 /etc/pptpd.conf newconffile
 /etc/init.d/pptpd newconffile
 /etc/ppp/pptpd-options newconffile
Description: PoPToP Point to Point Tunneling Server
 This implements a Virtual Private Networking Server (VPN) that is compatible
 with Microsoft VPN clients. It allows windows users to connect to an
 internal firewalled network using their dialup.

Package: libvolume-id0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 140
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: udev
Version: 0.125-7+lenny1
Depends: libc6 (>= 2.7-1)
Description: libvolume_id shared library
 This library is used to detect the type of a file system and read its
 metadata.

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 172
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.86.ds1-61
Replaces: last, sysvinit (<= 2.86.ds1-22)
Depends: libc6 (>= 2.7-1), libselinux1 (>= 2.0.59), libsepol1 (>= 2.0.25)
Suggests: sash
Conflicts: last
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, sulogin

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 540
Maintainer: Javier Fernandez-Sanguino Pen~a <jfs@computer.org>
Architecture: i386
Version: 3.0pl1-105
Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.0.59), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, lockfile-progs, checksecurity
Conflicts: lockfile-progs (<< 0.1.7), suidmanager (<< 0.50)
Conffiles:
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/standard 866e6f01ce98627ef489d8b3c2eb452b
 /etc/crontab 0648b7b3c0a12ff15eab7e3bb948e79a
 /etc/pam.d/cron cb94bf7627e6ef2fc1f5164b39df1e00
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/standard 597fcd12507f76fb847cc0174ad98b63
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/init.d/cron c54ed561c5674a3271cc4eeae3858640
 /etc/default/cron bb1951a2b617c5138ae6585891d14ed6
Description: management of regular background processing
 cron is a background process (`daemon') that runs programs at regular
 intervals (for example, every minute, day, week or month); which
 processes are run and at what times are specified in the `crontab'.
 .
 Users may also install crontabs so that processes are run on
 their behalf, though this feature can be disabled or restricted to
 particular users.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package is configured by default to do various standard
 system maintenance tasks, such as ensuring that logfiles do not
 grow endlessly and overflow the disk.
 .
 The lockfile-progs package is only a "Suggests" because of the poor
 way that dselect handles "Recommends", but I do strongly suggest that
 you install it; it prevents /etc/cron.daily/standard from running multiple
 times if something gets jammed.

Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 148
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: libedit
Version: 2.11~20080614-1
Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3)
Description: BSD editline and history libraries
 The editline library provides generic line editing and
 history functions.
 .
 It slightly resembles GNU readline

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 148
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: i386
Source: libselinux
Version: 2.0.65-5
Depends: libc6 (>= 2.7-1)
Description: SELinux shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux. Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux API.

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 1956
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: i386
Source: openssh
Version: 1:5.1p1-5
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.7-1), libcomerr2 (>= 1.01), libedit2 (>= 2.5.cvs.20010821-1), libkrb53 (>= 1.6.dfsg.2), libncurses5 (>= 5.6+20071006-3), libssl0.9.8 (>= 0.9.8g-9), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Recommends: xauth, openssh-blacklist, openssh-blacklist-extra
Suggests: ssh-askpass, libpam-ssh, keychain
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7)
Conffiles:
 /etc/ssh/ssh_config 974ad3e609a15fc5fe1941001e399202
 /etc/ssh/moduli b1c007bf229d5d1707a2aebe9732f13c
Description: secure shell client, an rlogin/rsh/rcp replacement
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide applications with a secure communication channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.

Package: ntpdate
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 204
Maintainer: Debian NTP Team <pkg-ntp-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: ntp
Version: 1:4.2.4p4+dfsg-8lenny2
Depends: netbase, libc6 (>= 2.7-1), libcap1, libssl0.9.8 (>= 0.9.8f-5)
Recommends: lockfile-progs
Conffiles:
 /etc/default/ntpdate 71d857cae72ae1f53380ea4f2e38cb2e
 /etc/dhcp3/dhclient-exit-hooks.d/ntpdate 714c145c22765fdfef242d456307e1c4
 /etc/network/if-up.d/ntpdate 78a5839e440618260d20d0bcecf05ada
 /etc/logcheck/ignore.d.server/ntpdate 8fc5628e78c8b27667ff8b9e8ab99c30
Description: client for setting system time from NTP servers
 NTP, the Network Time Protocol, is used to keep computer clocks
 accurate by synchronizing them over the Internet or a local network,
 or by following an accurate hardware receiver that interprets GPS,
 DCF-77, NIST or similar time signals.
 .
 ntpdate is a simple NTP client that sets a system's clock to match
 the time obtained by communicating with one or more NTP servers.  It
 is not sufficient, however, for maintaining an accurate clock in the
 long run.  ntpdate by itself is useful for occasionally setting the
 time on machines that do not have full-time network access, such as
 laptops.
 .
 If the full NTP daemon from the package "ntp" is installed, then
 ntpdate is not necessary.
Homepage: http://support.ntp.org/

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10512
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Source: glibc
Version: 2.7-18
Provides: glibc-2.7-1
Depends: libgcc1
Suggests: locales, glibc-doc, libc6-i686
Conflicts: libterm-readline-gnu-perl (<< 1.15-2), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/init.d/glibc.sh ce55541f2b38719f6eba57abe9f23603
 /etc/ld.so.conf.d/i486-linux-gnu.conf 36f09aeeab18f6af453d0a1db0a0942c
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
 /etc/gai.conf bdd4cc328b946a52cc1424ef3dfa9321
 /etc/bindresvport.blacklist db84c47f31f8d5a334a4053d8368e902
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.

Package: hostap-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 188
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: i386
Version: 1:0.4.7-1
Depends: libc6 (>= 2.7-1)
Conffiles:
 /etc/network/if-pre-up.d/hostap-utils ec2eea4c85aba0b655b67c896ce3d866
 /etc/modprobe.d/hostap-utils 0a960203120f90f08509ebe8fc2a958d
Description: Utility programs for Host AP driver for Intersil Prism2/2.5/3
 This is a Linux driver for wireless LAN cards based on Intersil's Prism2/2.5/3
 chipset. The driver supports a so called Host AP mode, i.e., it takes care
 of IEEE 802.11 management functions in the host computer and acts as an
 access point. This does not require any special firmware for the wireless
 LAN card. In addition to this, it has support for normal station operations
 in BSS and possible also in IBSS.
 .
 This packages contains binary utilities for use with hostap.
Homepage: http://w1.fi/

Package: apt-utils
Status: purge ok not-installed
Priority: important
Section: admin

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 804
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 0.125-7+lenny1
Replaces: initramfs-tools (<= 0.41)
Depends: libc6 (>= 2.7-1), libselinux1 (>= 2.0.59), libvolume-id0 (>= 0.113-1~), lsb-base (>= 3.0-6)
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Conflicts: hal (<< 0.5.6-2), hotplug, initramfs-tools (<< 0.39), initscripts (<< 2.85-16), klibc-utils (<= 1.4.19-1), lvm-common (<< 1.5.13), makedev (<< 2.3.1-80), module-init-tools (<< 3.2.2-1), multipath-tools (<< 0.4.7-2)
Conffiles:
 /etc/modprobe.d/pnp-hotplug e8155d705a254072c591de87cae4703c
 /etc/modprobe.d/display_class 3476b8fe19cf511fb3d2106f6d4f16b8
 /etc/modprobe.d/blacklist c8770183ed0c9f92b7a7d7fba17a82df
 /etc/init.d/udev 7b29b5ec2a1e6299259bc2c983b415dd
 /etc/init.d/udev-mtab 15dd8d4179efafa094c7661d8c51fe39
 /etc/udev/udev.conf d5a6a2c896ce540ae77f5a77a897e3a2
 /etc/udev/links.conf a30295e0e0c30db0b76ec3dd4c9e361c
 /etc/udev/rules.d/50-udev.rules 2fb022639af827973c2de2af28927901
 /etc/udev/rules.d/60-persistent-input.rules e1a9040ee58d711626395bc186b88de2
 /etc/udev/rules.d/75-persistent-net-generator.rules 5dc4d5e9f5aab0980042b739867d520c
 /etc/udev/rules.d/60-persistent-storage.rules 1f478f185e658dc887f196147ef3857b
 /etc/udev/rules.d/60-persistent-v4l.rules 2aafd9cc994ca87b695fedb711a2468c
 /etc/udev/rules.d/91-permissions.rules 1a16e32136838c068dd0eb46b6208f9e
 /etc/udev/rules.d/80-drivers.rules a7628acf3b283175eaadfeb331acf2a3
 /etc/udev/rules.d/75-cd-aliases-generator.rules abca08e74628c93f67edab360f0e09ec
 /etc/udev/rules.d/95-late.rules 3c723b4007bbeee70f9be0fa5fd1dfd8
 /etc/udev/rules.d/60-persistent-storage-tape.rules db3a5c1e5075450c3aeb4e283f8fa109
 /etc/scsi_id.config 90c176456f98d5f9407cc8a7540ae1d8
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time. It replaces
 the hotplug package and requires a 2.6.18 or newer kernel version.

Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1228
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: i386
Version: 1.4.2-6
Depends: libc6 (>= 2.7-1)
Description: administration tools for packet filtering and NAT
 These are the user-space administration tools for the Linux
 kernel's netfilter and iptables. netfilter and iptables provide
 a framework for stateful and stateless packet filtering, network
 and port address translation, and other IP packet manipulation.
 The framework is the successor to ipchains.
 .
 netfilter and iptables are used in applications such as Internet
 connection sharing, firewalls, IP accounting, transparent proxying,
 advanced routing and traffic control.
Homepage: http://www.netfilter.org/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1104
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Version: 3.2-4
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/skel/.bashrc eed8ae914410b3f768d345824117fd0b
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/bash.bashrc 194fbab82d44b57b961a860ae0a2d47e
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1624
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Version: 2.13.1.1-1
Replaces: fdisk, linux32, miscutils, schedutils, setterm, sparc-utils
Provides: linux32, schedutils
Depends: lsb-base (>= 3.0-6), tzdata (>= 2006c-2)
Pre-Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3), libselinux1 (>= 2.0.59), libslang2 (>= 2.0.7-1), libuuid1, zlib1g (>= 1:1.1.4)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: console-tools (<< 1:0.2.3-21), fdisk, kbd (<< 1.05-3), linux32, schedutils, setterm
Conffiles:
 /etc/init.d/hwclock.sh b56b63f3746082677487829b5c65f881
 /etc/init.d/hwclockfirst.sh 4c30746cd89fe5981a585a82649faaf8
 /etc/init.d/hwclock.sh newconffile
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libkrb53
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1188
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: krb5
Version: 1.6.dfsg.4~beta1-5lenny1
Depends: libc6 (>= 2.7-1), libcomerr2 (>= 1.34), libkeyutils1
Suggests: krb5-doc, krb5-user
Conflicts: libapache-mod-auth-kerb (<= 4.996-5.0-rc6-2), libapache2-mod-auth-kerb (<= 4.996-5.0-rc6-2), ssh-krb5 (<< 3.8.1p1-10)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime libraries used by applications and
 Kerberos clients.

Package: elvis-tiny
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 108
Maintainer: Miquel van Smoornburg <miquels@cistron.nl>
Architecture: i386
Version: 1.4-22
Pre-Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3)
Description: Tiny vi compatible editor for the base system
 Elvis-tiny is based on a 1991 Minix version of elvis. You should install
 another vi-editor (such as "vim", "elvis" or "nvi") if you want a vi
 editor that is full featured and has no bugs.

Package: pump
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 68
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 0.8.24-4
Provides: dhcp-client
Depends: libc6 (>= 2.7-1), libpopt0 (>= 1.14), netbase
Suggests: resolvconf
Conflicts: dhcpcd
Description: BOOTP and DHCP client for automatic IP configuration
 This is the BOOTP/DHCP client written by RedHat.
 .
 DHCP (Dynamic Host Configuration Protocol) and BOOTP (Boot Protocol)
 are protocols which allow individual devices on an IP network to get
 their own network configuration information (IP address, subnetmask,
 broadcast address, etc.) from network servers. The overall purpose of
 DHCP and BOOTP is to make it easier to administer a large network.
 .
 Pump is a combined BOOTP and DHCP client daemon, which allows your
 machine to retrieve configuration information from a server. You
 should install this package if you are on a network which uses BOOTP
 or DHCP.

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 476
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 2.9-13
Replaces: cpio-mt
Depends: libc6 (>= 2.7-1)
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.

Package: libstdc++6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1168
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.3
Version: 4.3.2-1.1
Depends: gcc-4.3-base (= 4.3.2-1.1), libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1)
Conflicts: scim (<< 1.4.2-1)
Description: The GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: libpcsclite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ludovic Rousseau <rousseau@debian.org>
Architecture: i386
Source: pcsc-lite
Version: 1.4.102-1
Depends: libc6 (>= 2.7-1)
Suggests: pcscd
Conflicts: libpcsclite-dev (<< 1.4.102-1), pcscd (<< 1.4.102-1)
Description: Middleware to access a smart card using PC/SC (library)
 The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
 in a very small form factor for communicating to smartcards and
 readers.
 .
 The PC/SC Lite library is used to connect to the PC/SC daemon from
 a client application and provide access to the desired reader.
Homepage: http://pcsclite.alioth.debian.org/

Package: busybox
Status: purge ok not-installed
Priority: optional
Section: utils

Package: less
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 224
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 418-1
Depends: debianutils (>= 1.8), libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3)
Description: Pager program similar to more
 Less is a program similar to more(1), but which allows backward
 movement in the file as well as forward movement.  Also, less does not
 have to read the entire input file before starting, so with large input
 files it starts up faster than text editors like vi(1).  Less uses
 termcap (or terminfo on some systems), so it can run on a variety of
 terminals.  There is even limited support for hardcopy terminals.
Homepage: http://www.greenwoodsoftware.com/less/

Package: deborphan
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 272
Maintainer: Carsten Hey <c.hey@web.de>
Architecture: i386
Version: 1.7.27
Depends: libc6 (>= 2.7-1)
Recommends: apt, dialog, gettext-base
Conffiles:
 /etc/bash_completion.d/deborphan 47b4d14e1c7f284c60ae835d4ea32bdf
Description: program that can find unused packages, e.g. libraries
 deborphan finds "orphaned" packages on your system. It determines which
 packages have no other packages depending on their installation and shows
 you a list of these packages. It is most useful when finding libraries,
 but it can be used on packages in all sections.
 .
 This package also includes orphaner, a text menu frontend to deborphan.
 Please install the recommended packages dialog, gettext-base and apt when
 you want a working and fully featured orphaner.

Package: libtext-charwidth-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: readline-common
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 136
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: readline5
Version: 5.2-3.1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libcap1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: i386
Source: libcap
Version: 1:1.10-14
Depends: libc6 (>= 2.3.2.ds1-4)
Description: support for getting/setting POSIX.1e capabilities
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.  Note that it will not provide any functionality with kernels
 below 2.2

Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 72
Maintainer: netfilter maintainers <netfilter-maintainers@ned.snow-crash.org>
Architecture: i386
Source: libnfnetlink
Version: 0.0.39-1
Depends: libc6 (>= 2.7-1)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.

Package: libwrap0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: tcp-wrappers
Version: 7.6.q-16
Depends: libc6 (>= 2.7-1)
Recommends: tcpd
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 420
Maintainer: Norbert Tretkowski <nobse@debian.org>
Architecture: i386
Version: 4.78.dfsg.1-4
Replaces: lsof-2.0.35, lsof-2.0.36, lsof-2.0.38, lsof-2.2 (<< 4.73)
Depends: libc6 (>= 2.7-1)
Conflicts: suidmanager (<< 0.50)
Description: List open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Homepage: http://people.freebsd.org/~abe/

