Package: tcpd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 212
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: tcp-wrappers
Version: 7.6.dbs-13
Replaces: libwrap0 (<< 7.6-8)
Depends: libc6 (>= 2.3.6-6), libwrap0, debconf (>= 0.5) | debconf-2.0
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: libtext-wrapi18n-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: wondershaper
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 80
Maintainer: Vince Mulhollon <vlm@debian.org>
Architecture: all
Version: 1.1a-4
Depends: iproute
Description: Easy to use traffic shaping script
 An easy to use traffic shaping script that provides these improvements:
  * Low latency for interactive traffic (and pings) at all times
  * Allow websurfing at reasonable speeds while uploading / downloading
  * Make sure uploads don't hurt downloads
  * Make sure downloads don't hurt uploads
 .
 It does this by:
  * Limiting upload speed slightly, to eliminate queues
  * Limiting download speed, while allowing bursts, to eliminate queues
  * Interactive traffic skips the queue
  * ACKs and tiny packets skip the queue
 .
 Configuring the wondershaper requires you to accurately and precisely
 determine your consistent upload and download speeds.
 .
 The wondershaper is the simplest, easiest to use, entry level, traffic
 shaping script provided by Debian.
 .
 After installing this package, read highly the detailed instructions:
 /usr/share/doc/wondershaper/README.Debian

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 780
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.5.11etch1
Replaces: debconf-tiny
Provides: debconf-2.0
Depends: debconf-i18n | debconf-english
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1)
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgnome2-perl, libqt-perl, libnet-ldap-perl, perl
Conflicts: cdebconf (<< 0.96), debconf-tiny, apt (<< 0.3.12.1), menu (<= 2.1.3-1), dialog (<< 0.9b-20020814-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13), debconf-utils (<< 1.3.22)
Conffiles:
 /etc/bash_completion.d/debconf 6a3a47451407cad3a08d81f7de9cac8a
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf eb448d7ec3a6258c8601e6b27284b791
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: vlan
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 128
Maintainer: Ard van Breemen <ard@kwaak.net>
Architecture: i386
Version: 1.9-2
Depends: libc6 (>= 2.3.6-6), iproute
Conffiles:
 /etc/network/if-pre-up.d/vlan 99d56f88c2489c63a26c8d892a06586c
 /etc/network/if-up.d/ip 02c0f01378c645ea17ad5057612b9e7c
 /etc/network/if-post-down.d/vlan 0096ede544b104ce8f60ed7eedae81a4
Description: user mode programs to enable VLANs on your ethernet devices
 This package contains the user mode programs you need to add and remove
 VLAN devices from your ethernet devices.
 .
 A typical application for a VLAN enabled box is a single wire firewall,
 router or load balancer.
 .
 You need a VLAN Linux kernel for this.  Linux kernel versions >= 2.4.14
 have VLAN support.

Package: mktemp
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 24
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 1.5-2
Replaces: debianutils (<< 2.16)
Depends: libc6 (>= 2.3.6-6)
Description: Makes unique filenames for temporary files
 Mktemp is a simple utility designed to make temporary file handling
 in shells scripts be safe and simple.

Package: libpq4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 565
Maintainer: Martin Pitt <mpitt@debian.org>
Architecture: i386
Source: postgresql-8.1
Version: 8.1.11-0etch1
Depends: libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3), libkrb53 (>= 1.4.2), libssl0.9.8 (>= 0.9.8c-1)
Description: PostgreSQL C client library
 libpq is a C library that enables user programs to communicate with
 the PostgreSQL database server.  The server can be on another machine
 and accessed through TCP/IP.  This version of libpq is compatible
 with servers from PostgreSQL 7.3 to 8.1.
 .
 This package contains the run-time library, needed by packages using
 libpq.
 .
 PostgreSQL is an object-relational SQL database management system.

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 10616
Maintainer: Michael Stone <mstone@debian.org>
Architecture: i386
Version: 5.97-5.3
Replaces: textutils, shellutils, fileutils, stat, debianutils (<= 2.3.1), dpkg (<< 1.13.2)
Provides: textutils, shellutils, fileutils
Pre-Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.3.6-6), libselinux1 (>= 1.32)
Conflicts: stat
Description: The GNU core utilities
 This package contains the essential basic system utilities.
 .
 Specifically, this package includes:
 basename cat chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir
 dircolors dirname du echo env expand expr factor false fmt fold groups head
 hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mv nice nl
 nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir
 sha1sum seq shred sleep sort split stat stty sum sync tac tail tee test touch
 tr true tsort tty uname unexpand uniq unlink users vdir wc who whoami yes

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 200
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 2.17
Replaces: miscutils, cron (<= 3.0pl1-31), tetex-bin (<< 1.0.6-1.1), manpages-fr (<= 0.9.3-1), passwd (<= 1:4.0.12-6)
Pre-Depends: libc6 (>= 2.3.6-6), coreutils (>= 4.5.8-1), mktemp
Conflicts: manpages-fr (<= 0.9.3-1)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel mkboot run-parts
 savelog sensible-browser sensible-editor sensible-pager tempfile
 which.

Package: libsysfs2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Martin Pitt <mpitt@debian.org>
Architecture: i386
Source: sysfsutils
Version: 2.1.0-1
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
 Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
 tree of system devices. libsysfs provides a stable programming
 interface to sysfs and eases querying system devices and their
 attributes.
 .
 The package sysfsutils contains frontend programs that use this
 library. Development files and C examples are provided by the package
 libsysfs-dev.

Package: bridge-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 148
Maintainer: Santiago Garcia Mantinan <manty@debian.org>
Architecture: i386
Version: 1.2-1
Depends: libc6 (>= 2.3.6-6)
Recommends: ifupdown
Conflicts: ifupdown (<< 0.6.0)
Conffiles:
 /etc/network/if-pre-up.d/bridge 35fc3c7b0b4d9b1c94a737799e8a2533
 /etc/network/if-post-down.d/bridge c075e66413cce421eb12e7222297cc5f
Description: Utilities for configuring the Linux ethernet bridge
 This package contains utilities for configuring the Linux ethernet
 bridge in Linux 2.4 or later. The Linux ethernet bridge can be used
 for connecting multiple ethernet devices together. The connecting is
 fully transparent: hosts connected to one ethernet device see hosts
 connected to the other ethernet devices directly.

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 360
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Version: 0.85h
Provides: linux-initramfs-tool
Depends: klibc-utils (>= 1.4.19-2), busybox (>= 1:1.01-3) | busybox-cvs-static (>= 20040623-1), cpio, module-init-tools, udev (>= 0.086-1)
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf 47add5605b5fe94675f6b13df3a3e7e4
 /etc/initramfs-tools/initramfs.conf 296b675c518585686980060dc68e300f
Description: tools for generating an initramfs
 This package contains tools to create and boot an initramfs for packaged 2.6
 Linux kernel. The initramfs is a gzipped cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on EVMS, MD, LVM2,
 LUKS or NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.

Package: makedev
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 156
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: all
Version: 2.3.1-83
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Conffiles:
 /etc/init.d/makedev 6db71bb7f1c016cadf07b947e2c0c943
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.

Package: laptop-detect
Status: purge ok not-installed
Priority: optional
Section: utils

Package: libxml2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1424
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: i386
Version: 2.6.27.dfsg-2
Depends: libc6 (>= 2.3.6-6), zlib1g (>= 1:1.2.1)
Recommends: xml-core
Conflicts: libxslt1.1 (<= 1.1.12-8)
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2308
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.0.18.1-7
Replaces: shadow-login, shadow-passwd, shellutils (<< 2.0-2), manpages-fi (<< 0.2-4), manpages-fr (<< 1.64.0-1), manpages-hu (<< 20010119-5), manpages-it (<< 0.3.4-2), manpages-ko (<< 20050219-2), manpages-ja (<< 0.5.0.0.20050915-1), manpages-pl (<= 20020406-1), manpages-de (<< 0.4-10), manpages-es-extra (<< 0.8a-15), manpages-tr, manpages-zh
Depends: libpam-modules (>= 0.72-5)
Pre-Depends: libc6 (>= 2.3.6-6), libpam0g (>= 0.76), libpam-runtime (>= 0.76-14)
Conflicts: shadow-login, pam-apps, secure-su, suidregister (<< 0.50), gnunet (<< 0.7.0c-2), amavisd-new (<< 2.3.3-8), python-4suite (<< 0.99cvs20060405-1), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4)
Conffiles:
 /etc/pam.d/login 0598d6621efece0e880e188560ab3010
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/login.defs 329d93b82fc9c0e52ec25ca74ac6a878
 /etc/securetty 03bcd882759f7b474cec241d90e791ef
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 292
Maintainer: James Troup <james@nocrew.org>
Architecture: i386
Source: gnupg
Version: 1.4.6-2
Replaces: gnupg (<< 1.4.5-2)
Depends: libc6 (>= 2.3.6-6), zlib1g (>= 1:1.2.1)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.

Package: ssh
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 32
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: all
Source: openssh
Version: 1:4.3p2-9
Depends: openssh-client, openssh-server
Description: Secure shell client and server (transitional package)
 This is a transitional package depending on both the OpenSSH client and
 the OpenSSH server, which are now in separate packages. You may remove
 it once the upgrade is complete and nothing depends on it.

Package: libgmp3c2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 684
Maintainer: Steve M. Robbins <smr@debian.org>
Architecture: i386
Source: gmp
Version: 2:4.2.1+dfsg-4
Replaces: libgmp3
Depends: libc6 (>= 2.3.6-6)
Conflicts: libgmp3, libgmp2 (<< 2.0.2-10)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
 .
 The home page is http://www.swox.com/gmp

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 436
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: dbus
Version: 1.0.2-1
Depends: libc6 (>= 2.3.6-6)
Recommends: dbus
Conflicts: dbus (<< 0.60)
Description: simple interprocess messaging system
 D-Bus is a message bus, used for sending messages between
 applications.  Conceptually, it fits somewhere in between raw sockets
 and CORBA in terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more.  It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML.  D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 D-Bus is still under heavy development, but is expected to be widely
 used.  It comes with several interfaces, including GLib.  See the
 description of libdbus-glib-1-2 for more information about those.
 .
 The daemon can be found in the dbus package.

Package: module-init-tools
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 308
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6), lsb-base (>= 3.0-6)
Conflicts: modutils (<= 2.4.21-1)
Conffiles:
 /etc/modprobe.d/aliases 94526ce688edeb9cbae132f9452089b2
 /etc/modprobe.d/arch/i386 688ef8c36b20113c46ec631e6c9effd4
 /etc/init.d/module-init-tools 2ea4c9bb43a28087092707fc8a4c46dd
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux (versions 2.5.48 and above). It serves
 the same function that the "modutils" package serves for Linux 2.4.

Package: man-db
Status: purge ok not-installed
Priority: important
Section: doc

Package: libgdbm3
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 80
Maintainer: James Troup <james@nocrew.org>
Architecture: i386
Source: gdbm
Version: 1.8.3-3
Depends: libc6 (>= 2.3.6-6)
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: ifenslave-2.6
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 52
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Version: 1.1.0-6
Depends: libc6 (>= 2.3.5-1)
Recommends: net-tools
Conflicts: ifenslave (<< 2), ifenslave-2.4 (<= 0.07+2.5.15-6)
Conffiles:
 /etc/network/if-up.d/ifenslave 1e47fbe9a32af2f55590704480488254
 /etc/network/if-down.d/ifenslave 039ff4b78b3b4e80b106f264e1fdc73b
Description: Attach and detach slave interfaces to a bonding device
 This is a tool to attach and detach slave network interfaces to a bonding
 device. A bonding device will act like a normal Ethernet network device to
 the kernel, but will send out the packets via the slave devices using a simple
 round-robin scheduler. This allows for simple load-balancing, identical to
 "channel bonding" or "trunking" techniques used in switches.
 .
 The kernel must have support for bonding devices for ifenslave to be useful.
 This package supports 2.6.x kernels and the most recent 2.4.x kernels. For
 older kernels use the ifenslave-2.4 package.

Package: zaptel
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 868
Maintainer: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Architecture: i386
Version: 1:1.4.7.xpp.r5178-2
Depends: libc6 (>= 2.3.6-6), libnewt0.52, libtonezone1 (>= 1:1.4.7.xpp.r5178), libusb-0.1-4 (>= 2:0.1.12), perl (>= 5.6.0-16), procps, fxload, zaptel-firmware (= 1:1.4.7.xpp.r5178-2), usbutils
Conffiles:
 /etc/modprobe.d/zaptel 239ee6f878e24ba61581b415f8a37c77
 /etc/udev/rules.d/xpp.rules 7d123f265b981e224eeae20b9a0028b9
 /etc/udev/rules.d/m_zaptel.perms 0e7cb550ef3c631ff55d291983f79a59
 /etc/hotplug/usb/xpp_fxloader.usermap 0421b79815b689835aadddf96e28d3cd
 /etc/init.d/zaptel a3595b35cad76c7fe96ab27635e11f95
 /etc/modutils/zaptel 8c0c9e94bc6c7de7d05d3577b20c9b15
Description: zapata telephony utilities
 Userspace utilities for configuring the Zapata telephony kernel driver,
 which supports various telephony hardware, such as Wildcard series of
 interface cards (X100P, T400P, E400P, S100P, S100U).
 .
 Includes ztcfg and zttool utils.

Package: libgcrypt11
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 416
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Version: 1.2.3-2
Depends: libc6 (>= 2.3.6-6), libgpg-error0 (>= 1.2)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 arcfour, blowfish, cast5, DSA, des, 3DES, elgamal, MD5, rijndael,
 RMD160, RSA, SHA1, twofish, tiger.

Package: libsdl1.2debian
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: libsdl1.2
Version: 1.2.11-8
Depends: libsdl1.2debian-alsa (= 1.2.11-8) | libsdl1.2debian-all (= 1.2.11-8) | libsdl1.2debian-esd (= 1.2.11-8) | libsdl1.2debian-arts (= 1.2.11-8) | libsdl1.2debian-oss (= 1.2.11-8) | libsdl1.2debian-nas (= 1.2.11-8)
Description: Simple DirectMedia Layer
 SDL is a library that allows programs portable low level access to
 a video framebuffer, audio output, mouse, and keyboard.
 .
 This is just a dummy package. You also need one of the four versions of
 the library that this package depends on.
 .
 (Note: Updates from SDL CVS after the version release date are occasionally
 factored into these packages).

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 84
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libc6 (>= 2.3.6-6)
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.

Package: libtasn1-3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 168
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Version: 0.3.6-2
Depends: libc6 (>= 2.3.6-6)
Recommends: libtasn1-3-bin
Conflicts: libtasn1-2 (= 0.3.1-1)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 28
Maintainer: Chris Lawrence <lawrencc@debian.org>
Architecture: all
Source: lsb
Version: 3.1-23.2etch1
Replaces: lsb-core (<< 2.0-6), lsb (<< 2.0-6)
Depends: sed, ncurses-bin
Conflicts: lsb-core (<< 2.0-6), lsb (<< 2.0-6)
Description: Linux Standard Base 3.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.

Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 588
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Version: 1:3.2.7-3
Replaces: watch, bsdutils (<< 2.9x-1)
Provides: watch
Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5), lsb-base (>= 3.0-10)
Recommends: psmisc
Conflicts: watch, libproc-dev (<< 1:1.2.6-2), w-bassman (<< 1.0-3), procps-nonfree, pgrep (<< 3.3-5)
Conffiles:
 /etc/sysctl.conf 233c3d5c45896ec21069d9d5a06c93ff
 /etc/init.d/procps.sh 778551944e9ac7ddffd44cd949baeff3
Description: /proc file system utilities
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.  More information can be found at procps
 website http://procps.sf.net/
 .
 This package includes the following utilities: top, uptime, tload,
 free, vmstat, watch, skill, pmap, pgrep, slabtop and pwdx.

Package: wpasupplicant
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 636
Maintainer: Debian/Ubuntu wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Architecture: i386
Version: 0.5.5-2
Depends: libc6 (>= 2.3.6-6), libdbus-1-3, libncurses5 (>= 5.4-5), libreadline5 (>= 5.1), libssl0.9.8 (>= 0.9.8c-1), lsb-base (>= 3.0-6)
Recommends: dhcp3-client
Suggests: libengine-pkcs11-openssl, guessnet, iproute
Conffiles:
 /etc/init.d/wpa-ifupdown 0dbdc73ac6a0e53ec429466a69e4cf95
 /etc/wpa_supplicant/functions.sh 0be1fed8308ad388a4cdfb17b479041c
 /etc/wpa_supplicant/ifupdown.sh 4356257fc40ebb10ca9f8ba6efc28a2a
 /etc/logrotate.d/wpa_action 2f64dd63ec9ccebb07b746910f6aeb04
Description: Client support for WPA and WPA2 (IEEE 802.11i)
 WPA and WPA2 are methods for securing wireless networks, the former
 using IEEE 802.1X, and the latter using IEEE 802.11i. This software
 provides key negotiation with the WPA Authenticator, and controls
 association with IEEE 802.11i networks.

Package: libspeex1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 184
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: speex
Version: 1.1.12-3
Replaces: libspeex
Depends: libc6 (>= 2.3.6-6)
Suggests: speex
Conflicts: libspeex
Description: The Speex Speech Codec
 Unlike other codecs like MP3 and Ogg Vorbis, Speex is specially
 designed for compressing voice at low bit-rates for applications
 such as voice over IP (VoIP). In some sense, it is meant to be
 complementary to the Ogg Vorbis codec.
 .
 This package is only the library.

Package: parprouted
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 36
Maintainer: David Moreno Garza <damog@debian.org>
Architecture: i386
Version: 0.63-1
Depends: libc6 (>= 2.3.6-6)
Description: transparent IP (Layer 3) proxy ARP bridging tool
 This is useful for creation of transparent firewalls and bridging
 networks with different MAC protocols. Also, unlike standard
 bridging, proxy ARP bridging allows to bridge Ethernet networks
 behind wireless nodes without using WDS or layer 2 bridging.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 300
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: all
Source: ncurses
Version: 5.5-5
Replaces: ncurses-term
Provides: ncurses-runtime
Depends: libncurses5 (>= 5.4-5)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 6d26dedffb91b9c2d2f0ea9c284b51db
Description: Descriptions of common terminal types
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100,
 vt102, vt220, vt52, and xterm.

Package: libpopt0
Status: install ok installed
Priority: important
Section: base
Installed-Size: 180
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Source: popt
Version: 1.10-3
Replaces: popt
Depends: libc6 (>= 2.3.6-6)
Conflicts: popt, libpopt-dev (<= 1.4-1), rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 172
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: pam
Version: 0.79-5
Replaces: libpam0g-util
Depends: libc6 (>= 2.3.6-6), libpam-runtime
Suggests: libpam-doc
Conflicts: libpam0 (<= 0.56-2), libpam
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.

Package: libpci2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 92
Maintainer: Debian pciutils Maintainers <pkg-pciutils-discuss@lists.alioth.debian.org>
Architecture: i386
Version: 2:2.1.11-3
Replaces: pciutils (<< 1:2.2.1-1)
Depends: libc6 (>= 2.3.6-6)
Conflicts: pciutils (<< 1:2.2.1-1), hardinfo (<= 0.3.6-3), kudzu (<= 1.1.36-2), sndconfig (<= 0.70-2), alsa-utils (<< 1.0.5-3)
Description: Obsolete shared library for accessing pci devices
 This is a transition package to allow for partial upgrades from sarge.
 It should be removed after etch is released.

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 92
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Source: libusb
Version: 2:0.1.12-5
Replaces: libusb0
Depends: libc6 (>= 2.3.6-6)
Conflicts: libusb0, libccid (<< 0.9.2-3)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 More information can be found at the Linux USB web site
 http://www.linux-usb.org/ .

Package: libgpg-error0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 196
Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>
Architecture: i386
Source: libgpg-error
Version: 1.4-1
Depends: libc6 (>= 2.3.6-6)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.

Package: ucf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 392
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Version: 2.0020
Depends: debconf (>= 1.2.0) | debconf-2.0, coreutils (>= 5.91)
Recommends: debconf-utils
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File: preserves user changes to config files.
 Debian policy states that configuration files must preserve user
 changes during package upgrade.  The easy way to achieve this behavior
 is to make the configuration file a `conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it.  This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile like handling for files that
 can not be labelled conffiles, are not shipped in a Debian package,
 but handled by the postinst instead.  This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for "conffiles".
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided conffile like protection to come
 under this schema, and attempts to minimize questions asked at
 install time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: perl-modules
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 11452
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: all
Source: perl
Version: 5.8.8-7etch1
Replaces: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl, liblocale-codes-perl
Provides: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl, liblocale-codes-perl
Depends: perl (>= 5.8.8-1)
Conflicts: libpod-parser-perl (<< 1.32-1), libansicolor-perl (<< 1.10-1), libfile-temp-perl (<< 0.16-1), libnet-perl (<= 1:1.19-3), libattribute-handlers-perl (<< 0.78_02-1), libcgi-pm-perl (<< 3.15-1), libi18n-langtags-perl (<< 0.35-1), liblocale-maketext-perl (<< 1.08-1), libmath-bigint-perl (<< 1.77-1), libnet-ping-perl (<< 2.31-1), libtest-harness-perl (<< 2.56-1), libtest-simple-perl (<< 0.62-1), liblocale-codes-perl (<< 2.06.1-1)
Conffiles:
 /etc/Net fb2946cae573b8ed3d654a180d458733
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 164
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux (2.12r-19etch1)
Version: 1:2.12r-19etch1
Pre-Depends: libc6 (>= 2.3.6-6)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: logger, renice, replay, script, wall

Package: sqlite3
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 84
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Version: 3.3.8-1.1
Depends: libc6 (>= 2.3.6-6), libreadline5 (>= 5.2), libsqlite3-0 (>= 3.3.8)
Suggests: sqlite3-doc
Description: A command line interface for SQLite 3
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.

Package: update-inetd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 92
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Version: 4.27-0.5
Depends: debconf
Conflicts: netbase (<< 4.27)
Description: inetd.conf updater
 This package provides a program used by other packages to automatically
 update /etc/inetd.conf.

Package: libssl0.9.8
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 6152
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: i386
Source: openssl
Version: 0.9.8c-4etch1
Depends: libc6 (>= 2.3.6-6), zlib1g (>= 1:1.2.1), debconf (>= 0.5) | debconf-2.0
Conflicts: ssleay (<< 0.9.2b), libssl, openssl (<< 0.9.6-2), libssl096-dev (<< 0.9.6-2)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: libglib1.2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 276
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: glib1.2
Version: 1.2.10-17
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines
 GLib is a library containing many useful C routines for things such as trees,
 hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but
 has been split off as of version 1.1.0.

Package: vim-common
Status: purge ok not-installed
Priority: important
Section: editors

Package: libpt-1.10.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3396
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: pwlib
Version: 1.10.2-2+etch1
Replaces: libpt-1.8.7, libpt-1.8.3c2, libpt-1.8.3c2a
Depends: libc6 (>= 2.3.6-6), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1-12), libldap2 (>= 2.1.17-1), libsasl2-2, libsdl1.2debian (>= 1.2.10-1), libssl0.9.8 (>= 0.9.8c-1), libstdc++6 (>= 4.1.1-12)
Conflicts: libpt-1.8.7, libpt-1.8.3c2, libpt-1.8.3c2a
Description: Portable Windows Library
 This package contains the shared version of the library PWLib, which is
 a moderately large class library that has its genesis many years ago as
 a method to produce applications to run on both Microsoft Windows and
 Unix X-Window systems.
 .
 For more information on PWLib visit the development homepage
 http://www.voxgratia.org/

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2220
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: i386
Version: 0.9.8c-4etch1
Depends: libc6 (>= 2.3.6-6), libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1)
Suggests: ca-certificates
Conflicts: ssleay (<< 0.9.2b)
Conffiles:
 /etc/ssl/openssl.cnf 0b1cf9a835b829131d630b7c2fe55f3c
Description: Secure Socket Layer (SSL) binary and related cryptographic tools
 This package contains the openssl binary and related tools.
 .
 It is part of the OpenSSL implementation of SSL.
 .
 You need it to perform certain cryptographic actions like:
  o  Creation of RSA, DH and DSA Key Parameters
  o  Creation of X.509 Certificates, CSRs and CRLs
  o  Calculation of Message Digests
  o  Encryption and Decryption with Ciphers
  o  SSL/TLS Client and Server Tests
  o  Handling of S/MIME signed or encrypted Mail

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 460
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: ncurses
Version: 5.5-5
Provides: tput
Pre-Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5)
Conflicts: ncurses, tput
Description: Terminal-related programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 1880
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: i386
Source: perl
Version: 5.8.8-7etch1
Replaces: perl-5.005-base (<< 6), perl-5.6-base (<< 6), perl (<< 5.8.8-5), perl-modules (<< 5.8.8-2), libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libclass-multimethods-perl (<< 1.70-4)
Provides: perl5-base, perlapi-5.8.0, perlapi-5.8.1, perlapi-5.8.2, perlapi-5.8.3, perlapi-5.8.4, perlapi-5.8.6, perlapi-5.8.7, perlapi-5.8.8, libscalar-list-utils-perl
Pre-Depends: libc6 (>= 2.3.6-6)
Suggests: perl
Conflicts: perl-5.004-base (<< 6), perl-5.005-base (<< 6), perl-5.6-base (<< 6), autoconf2.13 (<< 2.13-45), libscalar-list-utils-perl (<< 1:1.18-1)
Description: The Pathologically Eclectic Rubbish Lister
 A scripting language with delusions of full language-hood, Perl is used
 in many system scripts and utilities.
 .
 This is a stripped down Perl with only essential libraries.  To make
 full use of Perl, you'll want to install the `perl', `perl-modules' and
 optionally `perl-doc' packages which supplement this one.

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 264
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Source: sysvinit
Version: 2.86.ds1-38
Replaces: file-rc, sysvinit (<< 2.85-1)
Recommends: lsb-base (>= 3.0-6)
Suggests: sysv-rc-conf, bum
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, shutting down and changing runlevels,
 configured through symbolic links in /etc/rc?.d/.

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 4312
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Version: 0.6.46.4-0.1
Replaces: libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7)
Provides: libapt-pkg-libc6.3-6-3.11
Depends: libc6 (>= 2.3.6-6), libgcc1 (>= 1:4.1.1-12), libstdc++6 (>= 4.1.1-12), debian-archive-keyring
Suggests: aptitude | synaptic | gnome-apt | wajig, dpkg-dev, apt-doc, bzip2
Conffiles:
 /etc/cron.daily/apt f947beb92d709affb1cea7de275bea10
Description: Advanced front-end for dpkg
 This is Debian's next generation front-end for the dpkg package manager.
 It provides the apt-get utility and APT dselect method that provides a
 simpler, safer way to install and upgrade packages.
 .
 APT features complete installation ordering, multiple source capability
 and several other unique features, see the Users Guide in apt-doc.

Package: pciutils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 664
Maintainer: Debian pciutils Maintainers <pkg-pciutils-discuss@lists.alioth.debian.org>
Architecture: i386
Version: 1:2.2.4~pre4-1
Depends: libpci2, libc6 (>= 2.3.6-6)
Suggests: curl | wget | lynx
Description: Linux PCI Utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
 .
  Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: awds
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 616
Maintainer: Andre Herms <aherms@ivs.cs.uni-magdeburg.de>
Architecture: i386
Version: 7.1
Depends: libgea2 (>= 2.2), lsb-base (>= 3.0-6)
Conffiles:
 /etc/awds.key 52e1cfa2c95522441628db7424191c7c
 /etc/awds.conf 41c2c774cad33ac70a081511936e1572
 /etc/init.d/awds 31898788e28cfe639fccd623ca02da41
Description: A multi-hop routing for wireless ad-hoc networks
 This package contains the multi-hop rounting AWDS. It creates a
 virtual network interface on all participating stations that are
 logically connected like a switched Ethernet. Thus, all high-level
 protocols like IPv4, IPv6, DHCP, ARP, etc. can be used without any
 modifications. Furthermore, the virtual interface can be bridged with
 other devices to integrate the virtual network in an existing infrastructure.

Package: libsnmp9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3240
Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Architecture: i386
Source: net-snmp
Version: 5.2.3-7etch2
Replaces: snmp (<= 3.6.2-3), snmpd (<= 4.1.2-1)
Depends: libsnmp-base (>= 5.2.3-7etch2), libc6 (>= 2.3.6-6), libsensors3 (>= 1:2.10.1), libssl0.9.8 (>= 0.9.8c-1), libwrap0
Description: NET SNMP (Simple Network Management Protocol) Library
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.  The NET SNMP library contains common functions for the
 construction, sending, receiving, decoding, and manipulation of the
 SNMP requests and responses.

Package: libldap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 332
Maintainer: Torsten Landschoff <torsten@debian.org>
Architecture: i386
Source: openldap2
Version: 2.1.30-13.3
Replaces: libopenldap-runtime, libldap2-tls
Provides: libldap2-tls
Depends: libc6 (>= 2.3.6-6), libgnutls13 (>= 1.4.0-0), libsasl2-2
Conflicts: libldap2-tls, ldap-utils (<= 2.1.23-1)
Conffiles:
 /etc/ldap/ldap.conf 5f104fc31ae3b89e5958d2ce2d5f3ddd
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.

Package: libct3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 720
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: freetds
Version: 0.63-3.2
Depends: libc6 (>= 2.3.6-6)
Description: libraries for connecting to MS SQL and Sybase SQL servers
 FreeTDS is an implementation of the Tabular DataStream protocol, used for
 connecting to MS SQL and Sybase servers over TCP/IP.
 .
 This package includes the shared libraries for the Sybase CT-Lib API.
 You will need this if you plan to connect to MS SQL or Sybase servers, or use
 the PHP sybase or Perl DBD::Sybase extensions.

Package: madwifi-tools
Status: install ok installed
Priority: optional
Section: contrib/net
Installed-Size: 228
Maintainer: Debian madwifi team <pkg-madwifi-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1:0.9.4~rc2+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Suggests: wireless-tools
Conffiles:
 /etc/network/if-pre-up.d/050madwifi 76574deffa95f2cbdd06a16e9aaa2ad7
 /etc/network/if-post-down.d/z50madwifi 694fb3f5f29dd72f6855cc1cba18e66f
 /etc/modprobe.d/madwifi 73990a981f0656173b23731cdfcce820
Description: tools for the Multiband Atheros Driver for WiFi
 This package provides userspace tools for the madwifi driver. The tools are
 required to use and manipulate the madwifi interfaces present in a system.

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 148
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Version: 4.29
Depends: ifupdown (>= 0.6.4-4.9), openbsd-inetd | inet-superserver, iputils-ping | ping, lsb-base (>= 3.0-6), debconf (>= 0.5) | debconf-2.0
Conflicts: openbsd-inetd (<< 0.20050402-3), inetutils-inetd (<< 2:1.4.3+20060719-3), xinetd (<= 2.2.1-8), netstd (<< 3.00), nfs-common (<< 1:0.3.2-1), nfs-user-server (<< 2.2beta47-9), nis (<= 3.6-2), rstatd (<= 3.03-3), rwalld (<= 0.16-1), rusersd (<= 0.17-1), ugidd (<< 2.2beta47-9)
Conffiles:
 /etc/services f436d2e0ed02b7b73bd10c6693e95ac3
 /etc/init.d/networking 376925b05fa4ee65b5bad1c1c3f92063
 /etc/protocols bda8a6bc2d75d76473eed7993355311e
 /etc/rpc f0b6f6352bf886623adc04183120f83b
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libmagic1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1564
Maintainer: Michael Piefel <piefel@debian.org>
Architecture: i386
Source: file
Version: 4.17-5etch3
Depends: libc6 (>= 2.3.6-6), zlib1g (>= 1:1.2.1)
Suggests: file
Conflicts: file (<= 4)
Description: File type determination library using "magic" numbers
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.

Package: whiptail
Status: purge ok not-installed
Priority: important
Section: utils

Package: libgsm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Source: libgsm
Version: 1.0.10-13
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: libgsm-dev
Description: Shared libraries for GSM speech compressor
 Contains runtime shared libraries for libgsm, an implementation of
 the European GSM 06.10 provisional standard for full-rate speech
 transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse
 excitation/long term prediction) coding at 13 kbit/s.
 .
 GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
 rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
 with typical UNIX applications, our implementation turns frames of 160
 16-bit linear samples into 33-byte frames (1650 Bytes/s).
 The quality of the algorithm is good enough for reliable speaker
 recognition; even music often survives transcoding in recognizable
 form (given the bandwidth limitations of 8 kHz sampling rate).
 .
 The interfaces offered are a front end modelled after compress(1), and
 a library API.  Compression and decompression run faster than realtime
 on most SPARCstations.  The implementation has been verified against the
 ETSI standard test patterns.

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 360
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: i386
Source: libsepol
Version: 1.14-2
Depends: libc6 (>= 2.3.6-6)
Description: Security Enhanced Linux policy library for changing policy binaries
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.

Package: dmidecode
Status: purge ok not-installed
Priority: important
Section: utils

Package: libpam-modules
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 572
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: pam
Version: 0.79-5
Replaces: libpam0g-util
Provides: libpam-motd, libpam-mkhomedir
Depends: libc6 (>= 2.3.6-6), libcap1, libdb4.3 (>= 4.3.28-1), libpam0g (>= 0.76), libselinux1 (>= 1.32)
Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir, suidmanager (<< 0.50)
Conffiles:
 /etc/security/access.conf 1313ae263f90316407ed4bcd28b97baf
 /etc/security/pam_env.conf 3656d39561e390ec469accaf387bc8dc
 /etc/security/group.conf 0abd9d08c21f37578c7e04b9c2bd5526
 /etc/security/limits.conf ec3d534029582dfbfd05d72fef66ba12
 /etc/security/time.conf 62a54a799a700e506c24a22ad768ca64
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix_*.so module as well as some specialty modules.

Package: madwifi-modules-2.6.23-486-voyage
Status: install ok installed
Priority: optional
Section: non-free/net
Installed-Size: 704
Maintainer: Debian madwifi team <pkg-madwifi-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: madwifi (1:0.9.4~rc2-1)
Version: 1:0.9.4~rc2-1+5.0-1
Depends: madwifi-tools (>= 1:0.9.4~rc2+dfsg-1), linux-image-2.6.23-486-voyage
Recommends: wireless-tools
Description: modules for the Multiband Atheros Driver for WiFi (kernel 2.6.23-486-voyage)
 This package contains the set of loadable kernel modules for Atheros
 based WiFi chipsets.
 .
 This package contains the compiled kernel modules for 2.6.23-486-voyage
 .
 If you have compiled your own kernel, you will most likely need to build
 your own madwifi-modules. The madwifi-source package has been
 provided for use with the Debian's module-assistant or kernel-package
 utilities to produce a version of madwifi-ng-module for your kernel.

Package: tzdata
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 6012
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Version: 2007j-1etch1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Description: Time Zone and Daylight Saving Time Data
 This package contains data that represent the history of local time for many
 representative locations around the globe. It is updated periodically to
 reflect changes made by political bodies to time zone boundaries, UTC offsets,
 and daylight-saving rules

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 244
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: i386
Version: 0.6.8
Replaces: netbase (<< 4.00)
Depends: net-tools, libc6 (>= 2.3.6-6), debconf (>= 1.2.0) | debconf-2.0, lsb-base
Suggests: iproute, dhcp3-client | dhcp-client, ppp
Conffiles:
 /etc/init.d/ifupdown 346208729633adf45e2fa3f2bd3b19c6
 /etc/init.d/ifupdown-clean 8714629a86cdb405dfd451f066d68fe5
 /etc/default/ifupdown fab851ca87c5deb9d6f665e610184648
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: debconf-english
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 0
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.11etch1
Depends: debconf
Conflicts: debconf-i18n
Description: small footprint English-only debconf
 This package is an alternative to the debconf-i18n package, intended for
 systems that are administered only in English, and low-footprint systems.
 If you install this package, debconf will not work properly in other
 languages, but you'll save half a megabyte of disk space.

Package: asterisk-sounds-main
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 2644
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: all
Source: asterisk
Version: 1:1.4.14~dfsg-0.4849
Replaces: asterisk-sounds-extra
Recommends: asterisk
Description: Core Sound files for Asterisk (English)
 Asterisk is an Open Source PBX and telephony toolkit.
 .
 This package contains the default (core) sound files in English, useful for
 the operation of Asterisk.

Package: libogg0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Debian Xiph.org Maintainers <pkg-xiph-maint@lists.alioth.debian.org>
Architecture: i386
Source: libogg
Version: 1.1.3-2
Depends: libc6 (>= 2.3.5-1)
Description: Ogg Bitstream Library
 Libogg is a library for manipulating ogg bitstreams.  It handles
 both making ogg bitstreams and getting packets from ogg bitstreams.

Package: liblzo2-2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 192
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: i386
Source: lzo2
Version: 2.02-2
Depends: libc6 (>= 2.3.5-1)
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
 .
 Web site: http://www.oberhumer.com/opensource/lzo/

Package: dhcp3-client
Status: deinstall ok config-files
Priority: important
Section: net
Installed-Size: 612
Maintainer: Eloy A. Paris <peloy@debian.org>
Architecture: i386
Source: dhcp3
Version: 3.0.4-13
Config-Version: 3.0.4-13
Depends: debianutils (>= 2.8.2), dhcp3-common (= 3.0.4-13), libc6 (>= 2.3.6-6), debconf (>= 0.5) | debconf-2.0
Suggests: resolvconf, avahi-autoipd
Conflicts: dhcp-client (<< 3.0), samba-common (<< 3.0.0beta1-2)
Conffiles:
 /etc/dhcp3/dhclient-exit-hooks.d/debug 2771fdb07e0377015973788dcc3ef77f
 /etc/dhcp3/dhclient.conf 1a8c1b510da9d7688c1b8a91703c71b4
 /etc/dhcp3/dhclient-enter-hooks.d/debug f87002d243ba73fc352990172ff803a4
Description: DHCP Client
 This is the DHCP client from version 3 of the Internet Software
 Consortium DHCP package. For more information visit the ISC web
 site at http://www.isc.org.
 .
 This is a split off from the dhcp package and contains the DHCP client
 tools.
 .
 Cable modem users likely need this or another dhcp client to successfully
 connect to the network.
 .
 Documentation (apart from manpages) can be found in the dhcp package.

Package: mbr
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 92
Maintainer: Santiago Garcia Mantinan <manty@debian.org>
Architecture: i386
Version: 1.1.9-2
Depends: libc6 (>= 2.3.6-6)
Description: Master Boot Record for IBM-PC compatible computers.
 The MBR is used in booting operating systems from the hard disk. It
 runs first, then transfers control to the operating system's loader
 which transfers control to the kernel.

Package: libpri1.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 300
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: libpri
Version: 1.4.1-2
Replaces: libpri1.2 (<< 1.4.0-3)
Depends: libc6 (>= 2.3.6-6)
Conflicts: libpri1.2 (<< 1.4.0-3)
Description: Primary Rate ISDN specification library
 C implementation of the Primary Rate ISDN specification.  It was
 based on the Bellcore specification SR-NWT-002343 for National ISDN.  As of
 May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent
 5E Custom protocols on switches from Nortel and Lucent

Package: dhcp-client
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 280
Maintainer: Eloy A. Paris <peloy@debian.org>
Architecture: i386
Source: dhcp
Version: 2.0pl5-19.5etch2
Replaces: dhcp-client-beta
Depends: libc6 (>= 2.3.6-6)
Conflicts: dhcp-client-beta, dhcpcd
Conffiles:
 /etc/dhclient-script cc85f6375a1c1fd142e2b1e22ffd9e32
 /etc/dhclient.conf 10830c7543724cfd36f10dd87a5f98eb
Description: DHCP Client
 This is a split off from the dhcp package and contains the DHCP client
 tools.
 .
 Cable modem users likely need this or another dhcp client to successfully
 connect to the network.
 .
 Documentation (apart from manpages) can be found in the dhcp package.
 .
 Note: This package _requires_ a 2.2.x or later Linux kernel. 2.0.x
 kernels are _not_ supported.
 .
 This is the DHCP client from version 2 of the Internet Software
 Consortium DHCP package. For more information visit the ISC web site
 at http://www.isc.org.

Package: libsnmp-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3032
Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Architecture: all
Source: net-snmp
Version: 5.2.3-7etch2
Replaces: snmp (<= 3.6.2-3), libsnmp, zebra, zebra-pj, quagga
Provides: libsnmp
Conflicts: libsnmp
Description: NET SNMP (Simple Network Management Protocol) MIBs and Docs
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.  This package includes the MIBs (Management Information
 Bases) and documentation for the the SNMP libraries, agents and
 applications.  MIBs contain a formal description of the data that can
 be managed using SNMP.  They are used by NET SNMP libraries, agents
 and applications.

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1576
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.16-2etch1
Replaces: cpio
Pre-Depends: libc6 (>= 2.3.6-6)
Suggests: bzip2
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU tar
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: asterisk-gui
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 1176
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.0.svn2268-0.5209
Depends: asterisk (>= 1.4.0~0)
Recommends: zaptel (>= 1.4.8~dfsg)
Conffiles:
 /etc/asterisk/gui_custommenus.conf d41d8cd98f00b204e9800998ecf8427e
 /etc/asterisk/providers.conf d890e90618db7fac10f9fd22f716f247
Description: web-based user interface for the Asterisk PBX
 Asterisk <= 1.4 comes with a built-in http server and support for "AJAM":
 Asynchronous Javascript Asterisk Manger (AJAX-based manager interface).
 .
 This package includes static HTML, javascript and extra configurations
 to make a working user interface through that support. It provides a
 relatively simple and non-intrusive GUI for managing Asterisk.

Package: openbsd-inetd
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 132
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 0.20050402-6
Replaces: netkit-inetd
Provides: inet-superserver, netkit-inetd
Depends: libc6 (>= 2.3.6-6), libwrap0, lsb-base (>= 3.0-10), update-inetd, tcpd
Conflicts: netkit-inetd
Conffiles:
 /etc/init.d/openbsd-inetd 366a6603c46895a70ad787f01a26f00f
Description: The OpenBSD Internet Superserver
 The inetd server is a network daemon program that specializes in managing
 incoming network connections. Its configuration file tells it what
 program needs to be run when an incoming connection is received. Any
 service port may be configured for either of the tcp or udp protcols.
 .
 This is a port of the OpenBSD daemon with some debian-specific features.
 This package does not have many bugs of netkit-inetd and supports IPv6,
 built-in libwrap, binding to specific addresses, UNIX domain sockets and
 socket buffers tuning.

Package: openswan
Status: install ok half-configured
Priority: optional
Section: net
Installed-Size: 5456
Maintainer: Rene Mayrhofer <rmayr@debian.org>
Architecture: i386
Version: 1:2.4.6+dfsg.2-1.1
Provides: ike-server
Depends: libc6 (>= 2.3.6-6), libcurl3 (>= 7.15.5-1), libgmp3c2, libldap2 (>= 2.1.17-1), libpam0g (>= 0.76), libssl0.9.8 (>= 0.9.8c-1), bsdmainutils, debianutils (>= 1.7), ipsec-tools, openssl, host, iproute
Pre-Depends: debconf | debconf-2.0
Suggests: openswan-modules-source | linux-patch-openswan, curl
Conflicts: freeswan (<< 2.04-12)
Conffiles:
 /etc/ipsec.d/policies/clear 709c94d12dda6fffa57db0b846d04cda
 /etc/ipsec.d/policies/clear-or-private 60c09411c9d5a267beb7e914579324d0
 /etc/ipsec.d/policies/private-or-clear d5262151f3fd2bed298670e89f5df26b
 /etc/ipsec.d/policies/private 4446d2670602535162dd5828bcf9fbdc
 /etc/ipsec.d/policies/block 621572de957deb19412e28b920240014
 /etc/ipsec.d/examples/no_oe.conf e2f487a813602cb8ecbf41c88a43e038
 /etc/ipsec.d/examples/l2tp-cert.conf 5c920c1b4105a859841c1382790569c5
 /etc/ipsec.d/examples/l2tp-cert-orgWIN2KXP.conf d13153609e82b8aa7564e363ab843be6
 /etc/ipsec.d/examples/l2tp-psk.conf 7595bb1210ee8a7f2093a70340a363db
 /etc/ipsec.d/examples/l2tp-psk-orgWIN2KXP.conf cdf7130ee02f833f2baeeabbf759e705
 /etc/init.d/ipsec 202cadb5bd8ae2f1eebee51a27bfeff8
 /etc/logcheck/ignore.d.paranoid/openswan 5b11ff38eece30e93e45477b880dbe51
 /etc/logcheck/ignore.d.server/openswan cf2c607088873b349abccddca4271cb6
 /etc/logcheck/ignore.d.workstation/openswan cf2c607088873b349abccddca4271cb6
 /etc/logcheck/violations.ignore.d/openswan fca4432e2667e5f34bcba90007b85b1a
 /etc/ipsec.conf bb84b12c85e054a0c0f3b316439645f5
 /etc/ipsec.secrets 929e32a3af669e42363ce153904c5833
Description: IPSEC utilities for Openswan
 IPSEC is Internet Protocol SECurity. It uses strong cryptography to provide
 both authentication and encryption services. Authentication ensures that
 packets are from the right sender and have not been altered in transit.
 Encryption prevents unauthorised reading of packet contents.
 .
 This version of Openswan supports Opportunistic Encryption (OE) out of the
 box. OE enables you to set up IPsec tunnels to a site without
 co-ordinating with the site administrator, and without hand
 configuring each tunnel. If enough sites support OE, a "FAX effect"
 occurs, and many of us can communicate without eavesdroppers.
 .
 In addition to OE, you may manually configure secure tunnels through
 untrusted networks. Everything passing through the untrusted net is
 encrypted by the IPSEC gateway machine and decrypted by the gateway
 at the other end. The result is Virtual Private Network or VPN. This
 is a network which is effectively private even though it includes
 machines at several different sites connected by the insecure Internet.
 .
 Please note that you will need a recent kernel (>=2.4.24 or 2.6.x)
 for using this package. The standard Debian kernel includes both IPSEC
 and crypto support, patching the kernel is no longer necessary!
 .
 If you want to use the KLIPS IPSec code for kernel modules instead of the
 native ones, you will need to install either openswan-modules-source or
 linux-patch-openswan and build the respective modules for your kernel.

Package: watchdog
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 248
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: i386
Version: 5.2.6-6
Depends: libc6 (>= 2.3.6-6), debconf (>= 0.5) | debconf-2.0, makedev (>= 2.3.1-24) | devfsd | udev
Conffiles:
 /etc/init.d/watchdog f738e90e035fd2690609beaf611a6c1a
 /etc/watchdog.conf 07869059528f7fb4a2a77a124fd1e097
Description: software watchdog
 The watchdog program writes to /dev/watchdog every ten seconds.
 If the device is open but not written to within a minute the machine
 will reboot -- a feature available when "software watchdog" support
 is compiled into the kernel.
 .
 The ability to reboot will depend on the state of the machine
 and interrupts.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 164
Maintainer: Mark Brown <broonie@debian.org>
Architecture: i386
Source: zlib
Version: 1:1.2.3-13
Replaces: zlib1g-udeb
Provides: libz1
Depends: libc6 (>= 2.3.6-6)
Conflicts: zlib1 (<= 1:1.0.4-7), zlib1g-udeb
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.

Package: fxload
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 72
Maintainer: Fumitoshi UKAI <ukai@debian.or.jp>
Architecture: i386
Version: 0.0.20020411-1
Replaces: hotplug-utils
Provides: hotplug-utils
Depends: libc6 (>= 2.2.5-13)
Conflicts: hotplug-utils
Enhances: hotplug
Description: Firmware download to EZ-USB devices
 This program is conveniently able to download firmware into FX and FX2
 ez-usb devices. It is intended to be invoked by hotplug scripts when
 the unprogrammed device appears on the bus.

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 900
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Version: 3.102
Replaces: manpages-pl (<= 20051117-1), manpages-it (<< 0.3.4-2)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 527e6a57d0bc9f7c1b1aca2071f3da00
Description: Add and remove users and groups
 This package includes the adduser and deluser commands for creating
 and removing users.
 .
  - Adduser can create new users and groups and add existing users to
    existing groups.
  - Deluser can remove users and groups and remove users from a given
    group.
 .
 Adding users with adduser is much easier than adding them by hand.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, allow you to set an
 initial password and the GECOS field.
 .
 Deluser can optionally remove and backup the user's home directory
 and mail spool or all files on the system owned by him.
 .
 Optionally a custom script can be executed after each of the commands.
 .
 Adduser is maintained on http://alioth.debian.org/projects/adduser/.
 There is also a development mailing list on
 http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/.

Package: iptraf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 732
Maintainer: Frederic Peters <fpeters@debian.org>
Architecture: i386
Version: 3.0.0-3
Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5)
Conffiles:
 /etc/logrotate.d/iptraf 6627fbb377f40ec46f7b8fddebd18be2
Description: Interactive Colorful IP LAN Monitor
 IPTraf is an ncurses-based IP LAN monitor that generates
 various network statistics including TCP info, UDP counts,
 ICMP and OSPF information, Ethernet load info, node stats,
 IP checksum errors, and others.

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 112
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Version: 1.4a12-21
Replaces: netstd
Depends: libc6 (>= 2.3.6-6)
Conflicts: suidmanager (<< 0.50)
Description: traces the route taken by packets over a TCP/IP network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.

Package: php5-cgi
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 10208
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: i386
Source: php5
Version: 5.2.0-8+etch10
Provides: phpapi-20060613+lfs
Depends: libbz2-1.0, libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3), libdb4.4, libkrb53 (>= 1.4.2), libpcre3 (>= 4.5), libssl0.9.8 (>= 0.9.8c-1), libxml2 (>= 2.6.27), zlib1g (>= 1:1.2.1), mime-support (>= 2.03-1), php5-common (= 5.2.0-8+etch10), libmagic1, ucf
Suggests: php-pear
Conflicts: php3 (<= 3.0.18-1)
Description: server-side, HTML-embedded scripting language (CGI binary)
 This package provides the /usr/lib/cgi-bin/php5 CGI interpreter built
 for use in apache 1.3 or apache 2 with mod_actions, or any other CGI
 httpd that supports a similar mechanism.  Note that MOST apache users
 probably want the libapache-mod-php5 or libapache2-mod-php5 packages.
 .
 The following extensions are built in: bcmath bz2 calendar ctype date dba
 dom exif filter ftp gettext hash iconv json libxml mbstring mime_magic
 openssl pcre posix Reflection session shmop SimpleXML soap sockets SPL
 standard sysvmsg sysvsem sysvshm tokenizer wddx xml xmlreader xmlwriter zip
 zlib.
 .
 PHP5 is an HTML-embedded scripting language. Much of its syntax is borrowed
 from C, Java and Perl with a couple of unique PHP-specific features thrown
 in. The goal of the language is to allow web developers to write dynamically
 generated pages quickly.
 .
 Homepage: http://www.php.net/

Package: manpages
Status: purge ok not-installed
Priority: important
Section: doc

Package: ed
Status: purge ok not-installed
Priority: important
Section: editors

Package: libopenh323-1.18.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7908
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: openh323
Version: 1.18.0.dfsg-1
Replaces: libopenh323-1.15.2, libopenh323-1.15.3c2, libopenh323-1.15.6, libopenh323-1.17.3
Depends: libc6 (>= 2.3.6-6), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1-12), libldap2 (>= 2.1.17-1), libpt-1.10.0 (>= 1.10.2-2), libsasl2 (>= 2.1.19.dfsg1), libsdl1.2debian (>= 1.2.10-1), libssl0.9.8 (>= 0.9.8c-1), libstdc++6 (>= 4.1.1-12)
Suggests: libopenh323-dev
Conflicts: libopenh323-1.15.2, libopenh323-1.15.3c2, libopenh323-1.15.6, libopenh323-1.17.3
Description: H.323 aka VoIP library
 This package contains the shared version of the OpenH323 library.
 .
 The OpenH323 project aims to create a full featured, interoperable,
 Open Source implementation of the ITU H.323 teleconferencing protocol
 that can be used freely by everybody. This protocol is most used for
 Voice over IP (VoIP) conferencing.
 .
 For more information on the OpenH323 project visit them at
 http://www.voxgratia.org/

Package: tasksel
Status: purge ok not-installed
Priority: important
Section: admin

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 48
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.1 (4.1.1ds2-21)
Version: 1:4.1.1-21
Depends: gcc-4.1-base (= 4.1.1-21), libc6 (>= 2.3.6-6)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: nocatsplash
Status: install ok installed
Priority: optional
Section: main
Installed-Size: 240
Maintainer: root <punkytse@yahoo.com>
Architecture: i386
Version: 0.92-2
Depends: libc6 (>= 2.3.2.ds1-4), libglib1.2 (>= 1.2.0)
Conffiles:
 /etc/nocat.conf f189ea9678074ccc42d92e9b71c77c8c
 /etc/default/nocatsplash c7c5addfa0a8e0517461151b3cda53dc
 /etc/init.d/nocatsplash 301851466bc9daea6e30c9e099658348
Description: gateway daemon for open public network
 NoCatSplash is a Open Public Network Gateway Daemon.  It performs as a
 [captive/open/active] portal.  When run on a gateway/router on a network,
 all web requests are redirected until the client either logs in or clicks
 "I Accept" to an AUP. The gateway daemon then changes the firewall rules
 on the gateway to pass traffic for that client (based on IP address and
 MAC address).

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: maximilian attems <maks@sternwelten.at>
Architecture: i386
Source: klibc
Version: 1.4.34-2
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.

Package: grub
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 804
Maintainer: Grub Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: i386
Version: 0.97-27
Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5)
Suggests: grub-doc, mdadm
Description: GRand Unified Bootloader
 GRUB is a GPLed bootloader intended to unify bootloading across x86
 operating systems.  In addition to loading the Linux kernel,
 it implements the Multiboot standard, which allows for flexible loading
 of multiple boot images (needed for modular kernels such as the GNU Hurd).

Package: libasound2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1108
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: i386
Source: alsa-lib
Version: 1.0.13-2
Depends: libc6 (>= 2.3.6-6)
Suggests: libasound2-plugins (>= 1.0.9)
Conflicts: libasound2-plugins (<< 1.0.9)
Description: ALSA library
 This package contains the ALSA library and its standard
 plugins.
 .
 ALSA is the Advanced Linux Sound Architecture.

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 352
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 4
Replaces: base, miscutils
Provides: base
Depends: awk, base-passwd (>= 2.0.3.4)
Conffiles:
 /etc/debian_version 2b547e7f2d89dac70cd423f23456ea63
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 8a399308bad94f46882432104b8d7c7d
 /etc/issue.net d62b75c91b29bd556806c0eccb41557b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 340
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.12r-19etch1
Pre-Depends: libblkid1 (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: pcmciautils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 156
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 014-3
Depends: module-init-tools (>= 3.2.2), lsb-base (>= 3.0-6), libc6 (>= 2.3.6-6), libsysfs2
Recommends: udev
Suggests: wireless-tools
Conffiles:
 /etc/udev/pcmcia.rules d94fb0469e3665ce44703c8bd85899b9
 /etc/init.d/pcmciautils 15b1e5f509ea69f6ee486a00914f79be
Description: PCMCIA utilities for Linux 2.6
 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
 later, replacing the old pcmcia-cs tools used with earlier kernel versions.
 PCMCIA cards are commonly used in laptops to provide expanded capabilities
 such as network connections, modems, increased memory, etc.
 .
 To use PCMCIA you need to have kernel modules available to support
 it. These are included in the stock Debian 2.6 kernel packages. You
 will most likely also need udev, although it isn't always required.
 .
 The wireless-tools package is required by many wireless network adapters.

Package: libsqlite3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Source: sqlite3
Version: 3.3.8-1.1
Depends: libc6 (>= 2.3.6-6)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.

Package: libtext-iconv-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: hostapd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 552
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: i386
Version: 1:0.5.5-3.1
Depends: libc6 (>= 2.3.6-6), libssl0.9.8 (>= 0.9.8c-1), lsb-base (>= 3.0-3)
Conffiles:
 /etc/hostapd/hostapd.conf 14a60f6a061c71603a6da16d48909970
 /etc/default/hostapd a0170f58e75d9bf44f0b0cf4f0cbb338
 /etc/init.d/hostapd 39f9552ea8cd717711a8f98c799b1e02
Description: user space IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
 Originally, hostapd was an optional user space component for Host AP
 driver. It adds more features to the basic IEEE 802.11 management
 included in the kernel driver: using external RADIUS authentication
 server for MAC address based access control, IEEE 802.1X Authenticator
 and dynamic WEP keying, RADIUS accounting, WPA/WPA2 (IEEE 802.11i/RSN)
 Authenticator and dynamic TKIP/CCMP keying.
 .
 The current version includes support for other drivers, an integrated
 EAP authenticator (i.e., allow full authentication without requiring
 an external RADIUS authentication server), and RADIUS authentication
 server for EAP authentication.
 .
 hostapd works with the following drivers:
 .
  * Host AP driver for Prism2/2.5/3,
  * Prism54 driver for Intersil/Conexant Prism GT/Duette/Indigo,
  * madwifi driver for cards based on Atheros chip set (ar521x),
  * Any wired Ethernet driver for wired IEEE 802.1X authentication.

Package: libreadline5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 312
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Source: readline5
Version: 5.2-2
Depends: readline-common, libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 544
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Source: ncurses
Version: 5.5-5
Depends: libc6 (>= 2.3.6-6)
Recommends: libgpmg1
Description: Shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.

Package: libsvga1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 652
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: i386
Source: svgalib
Version: 1:1.4.3-24
Replaces: svgalibg1, svgalib-dummyg1
Provides: svgalibg1
Depends: libc6 (>= 2.3.6-6)
Conflicts: svgalib, svgalib1 (<< 1:1.2.11-1), svgalib-dummyg1, svgalib-dummy1 (<< 1.2.11-1)
Conffiles:
 /etc/vga/dvorak-us.keymap 98cf602197cc2276cbc4f4ef1f4a9200
 /etc/vga/libvga.et4000 625713aa06a05cd242bef448c7cf2b71
 /etc/vga/null.keymap c8a2e73e2cdb4bfbc39bb739ca78976c
 /etc/vga/libvga.config 8c7dcfad0b2dcfd7332150966196565b
Description: console SVGA display libraries
 svgalib provides graphics capabilities to programs running on the
 system console, without going through the X Window System. It uses
 direct access to the video hardware to provide low-level access to
 the standard VGA and SVGA graphics modes. Only works with some
 video hardware; use with caution.
 .
 This package contains the shared libraries and config files.
Tag: implemented-in::c, devel::library, interface::svga, role::shared-lib

Package: portmap
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 152
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 5-26
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.3.6-6), libwrap0, debconf (>= 0.5) | debconf-2.0, lsb-base (>= 1.3-9)
Conffiles:
 /etc/init.d/portmap 759b388e764cc3d03d3c5b45e73a0a3b
Description: The RPC portmapper
 Portmap is a server that converts RPC (Remote Procedure Call) program
 numbers into DARPA protocol port numbers.  It must be running in order
 to make RPC calls.
 .
 Services that use RPC include NFS and NIS.

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 440
Maintainer: Paul Slootman <paul@debian.org>
Architecture: i386
Version: 2.6.9-2etch1
Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.3.6-6), libpopt0 (>= 1.10), lsb-base (>= 3.0)
Suggests: openssh-client, openssh-server
Conffiles:
 /etc/default/rsync 126a5f9d12d57da27b95192fed269ad5
 /etc/init.d/rsync 94fb006c17748a66d159561dc258227d
Description: fast remote file copy program (like rcp)
 rsync is a program that allows files to be copied to and from remote
 machines in much the same way as rcp.  It has many more options than
 rcp, and uses the rsync remote-update protocol to greatly speed up
 file transfers when the destination file already exists.
 .
 The rsync remote-update protocol allows rsync to transfer just the
 differences between two sets of files across the network link.
 .
 This package also includes rsyncd daemon functionality.

Package: bcrelay
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 68
Maintainer: Rene Mayrhofer <rmayr@debian.org>
Architecture: i386
Source: pptpd
Version: 1.3.0-2etch2
Replaces: pptpd (<< 1.2.3-1)
Depends: libc6 (>= 2.3.6-6)
Description: Broadcast relay daemon
 The bcrelay daemon relays broadcasts between two interfaces. It is shipped
 with the pptpd package, but can be used for other purposes.

Package: tasksel-data
Status: purge ok not-installed
Priority: important
Section: admin

Package: ppp
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1012
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 2.4.4rel-8
Replaces: ppp-pam, ppp-udeb
Depends: libc6 (>= 2.3.6-6), libpam0g (>= 0.76), libpcap0.8 (>= 0.9.3-1), libpam-modules, libpam-runtime (>= 0.76-13.1), netbase, procps
Suggests: iptables
Conflicts: ppp-pam, ppp-udeb, pppdcapiplugin (<= 1:3.7.2005-07-09-2), makedev (<< 2.3.1-56)
Conffiles:
 /etc/bash_completion.d/pon 41cf8cde5bd9fefe51100a051947b118
 /etc/apm/event.d/ppp c894b205a1638f6fbb7bb477c8d253b6
 /etc/ppp/ip-up.d/0000usepeerdns 47b1eee2bd4e9e492ad5a9f5870ca272
 /etc/ppp/ip-down.d/0000usepeerdns 71822da78b9163dfbcb6f1bbd662b9b6
 /etc/ppp/options 05bc845e4e5e6b3645666418237ad489
 /etc/ppp/ip-up 612431b1564d97e3925bc692079aabdb
 /etc/ppp/ip-down 7a44bcdb7d4a0920669b496bb4d007b5
 /etc/ppp/ipv6-up 02838ef669ec30a3a6afef7b1ce7ecc9
 /etc/ppp/ipv6-down 831796b566df95e0d5143ca6b35f082d
 /etc/chatscripts/pap 17dbbede1dc894aa6c6c4e8be5727c1d
 /etc/logrotate.d/ppp 8434ebaff1b3b33bb0ea0bce523adfd3
 /etc/init.d/pppd-dns b2c62dcf0465db76694d5edb22a274ae
 /etc/pam.d/ppp cc163be3dbe4258e639238ccd5bcdea0
Description: Point-to-Point Protocol (PPP) daemon
 The Point-to-Point Protocol (PPP) provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link (the "peers") to negotiate various optional
 characteristics of the link.  Using PPP, a serial link can be used to
 transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
 between the peers.

Package: libvorbisenc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1052
Maintainer: Debian Xiph.org Maintainers <pkg-xiph-maint@lists.alioth.debian.org>
Architecture: i386
Source: libvorbis
Version: 1.1.2.dfsg-1.3
Replaces: libvorbis0 (<< 1.0.0)
Depends: libc6 (>= 2.3.6-6), libvorbis0a (>= 1.1.2)
Conflicts: libvorbis0 (<< 1.0.0)
Description: The Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisenc library provides a convenient API for setting up an encoding
 environment using libvorbis.

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 92
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Version: 3.7.1-3
Depends: libc6 (>= 2.3.5-1), libpopt0 (>= 1.7), libselinux1 (>= 1.30), cron | anacron | fcron, base-passwd (>= 2.0.3.4)
Recommends: mailx
Conffiles:
 /etc/logrotate.conf 52a69079dac7bbc0ee80876d14dbf6a8
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: i386
Source: expat
Version: 1.95.8-3.4
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML.

Package: libltdl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: i386
Source: libtool
Version: 1.5.22-4
Depends: libc6 (>= 2.3.5-1)
Description: A system independent dlopen wrapper for GNU libtool
 This package contains the run-time libltdl library.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen

Package: iproute
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 752
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: i386
Version: 20061002-3
Provides: arpd
Depends: libatm1, libc6 (>= 2.3.6-6), libdb4.3 (>= 4.3.28-1)
Recommends: iproute-doc
Conflicts: arpd
Conffiles:
 /etc/iproute2/ematch_map 0b9befbbbee4b415319b8070f18b9b88
 /etc/iproute2/rt_dsfield 4f5a41d3f54cbe251826a6f7a3fff59d
 /etc/iproute2/rt_protos 83da07a831e71eb4f6dfaec3d27de345
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
Description: Professional tools to control the networking in Linux kernels
 This is `iproute', the professional set of tools to control the
 networking behavior in kernels 2.2.x and later.
 .
 At least, the options CONFIG_NETLINK and CONFIG_NETLINK_DEV (or
 CONFIG_RTNETLINK) must be compiled into the running kernel.
 .
 This package is also known as iproute2 upstream and in some
 documentation.

Package: asterisk-h323
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 508
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: asterisk
Version: 1:1.4.14~dfsg-0.4849
Depends: asterisk (>= 1:1.4.0-1), libc6 (>= 2.3.6-6), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1-12), libldap2 (>= 2.1.17-1), libopenh323-1.18.0 (>= 1.18.0.dfsg-1), libpt-1.10.0 (>= 1.10.2-2), libsasl2-2, libsdl1.2debian (>= 1.2.10-1), libssl0.9.8 (>= 0.9.8c-1), libstdc++6 (>= 4.1.1-12)
Description: H.323 protocol support for Asterisk
 Asterisk is an Open Source PBX and telephony toolkit.
 .
 This channel driver (chan_h323) provides support for the H.323 protocol
 for Asterisk. This is an implementation originally contributed by NuFone and
 nowdays maintained and distributed by Digium, Inc. Hence, it is considered
 the official H.323 chanel driver.
 .
 This is one of many H.323 channel implementations for Asterisk with others
 being chan_oh323 and chan_ooh323c, distributed by Debian as asterisk-oh323 and
 asterisk-ooh323c, respectively.
 .
 For more information about the Asterisk PBX, have a look at the Asterisk
 package.

Package: arptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 96
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Version: 0.0.3-1
Depends: libc6 (>= 2.3.2.ds1-4)
Description: ARP table administration
 Arptables is used to set up, maintain, and inspect the tables of
 ARP rules in the Linux kernel. It is analogous to iptables,
 but operates at the ARP layer rather than the IP layer.

Package: voyage-util
Status: install ok installed
Priority: optional
Section: main
Installed-Size: 236
Maintainer: Punky Tse <punkytse@yahoo.com>
Architecture: all
Version: 0.5-1
Conffiles:
 /etc/voyage-profiles/4501.pro 29c66bd98efdf8cc8bde8a4baffd76f5
 /etc/voyage-profiles/4511.pro 02707ac105c06377af9b0da0103a9718
 /etc/voyage-profiles/5501.pro 171d3b68e8ed44b32b5a0884d9fe2acf
 /etc/voyage-profiles/alix.pro 33a0635ce9807f2db2281b91de4edbc5
 /etc/voyage-profiles/genericpc.pro 9aa711fe8dde09f47569b62f028fbf11
 /etc/voyage-profiles/notebook.pro 58c9e41216eb1d09cdea1c65a73100fa
 /etc/voyage-profiles/wrap.pro 468d8c3a52d635332adf73c0cca49293
 /etc/fstab 05ac72e1e3c8f648e3f6215307cf4efa
 /etc/kernel-img.conf 03631f15b46520f646aa122f7077ca91
 /etc/dnsmasq.more.conf 94e24e01f91611d18a2e2cd785ceb33a
 /etc/voyage.conf 7bb36b1be97318893e5aac36d335920d
 /etc/motd.voyage dc97049c7060c90171a9f4431a225c93
 /etc/bash_completion.d/trafmon 2ca75fd6122a6272066513254bac7514
 /etc/default/voyage-util 91ae33d1a9d5f118ac397c49aef44dbf
 /etc/init.d/voyage-util 2706cc3d28a4aab2362ebd35dbe8828a
Description: This debian package contains all useful scripts for installing
 and configurating voyage linix distribution.

Package: iperf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 136
Maintainer: Roberto Lumbreras <rover@debian.org>
Architecture: i386
Version: 2.0.2-2
Depends: libc6 (>= 2.3.6-6), libgcc1 (>= 1:4.1.0), libstdc++6 (>= 4.1.0)
Description: Internet Protocol bandwidth measuring tool
 Iperf is a modern alternative for measuring TCP and UDP bandwidth performance,
 allowing the tuning of various parameters and characteristics.
 .
 Features:
    * Measure bandwidth, packet loss, delay jitter
    * Report MSS/MTU size and observed read sizes.
    * Support for TCP window size via socket buffers.
    * Multi-threaded. Client and server can have multiple simultaneous
      connections.
    * Client can create UDP streams of specified bandwidth.
    * Multicast and IPv6 capable.
    * Options can be specified with K (kilo-) and M (mega-) suffices.
    * Can run for specified time, rather than a set amount of data to transfer.
    * Picks the best units for the size of data being reported.
    * Server handles multiple connections.
    * Print periodic, intermediate bandwidth, jitter, and loss reports at
      specified intervals.
    * Server can be run as a daemon.
    * Use representative streams to test out how link layer compression affects
      your achievable bandwidth.

Package: odbcinst1debian1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 244
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: unixodbc
Version: 2.2.11-13
Replaces: unixodbc (<< 2.1.1-2)
Depends: libc6 (>= 2.3.5-1), libltdl3 (>= 1.5.2-2)
Conflicts: odbcinst1
Conffiles:
 /etc/odbc.ini d41d8cd98f00b204e9800998ecf8427e
 /etc/odbcinst.ini d41d8cd98f00b204e9800998ecf8427e
Description: Support library and helper program for accessing odbc ini files
 This package contains the libodbcinst library from unixodbc, a library
 used by ODBC drivers for reading their configuration settings from
 /etc/odbc.ini and ~/.odbc.ini.  It is useful to provide this in
 a stand-alone package, so that all ODBC drivers in Debian can use a
 consistent ini library, regardless of whether applications are built
 with iodbc or unixodbc.
 .
 Also contained in this package is the odbcinst helper tool, which
 allows ODBC driver packages to install their own driver settings, and
 the driver setup plugins, which describe the features supported by
 individual ODBC drivers.

Package: usbutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 252
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Version: 0.72-7
Depends: libc6 (>= 2.3.6-6), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.2.1)
Suggests: wget (>= 1.8.1-6) | lynx (>= 2.8.4.1b-3)
Description: USB console utilities
 This applications show what the device tree of the USB bus looks
 like. It shows a graphical representation of the devices that are
 currently plugged in, showing the topology of the USB bus. It also
 displays information on each individual device on
 the bus.
 .
 More information can be found at the Linux USB web site
 http://www.linux-usb.org/ .

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 36
Maintainer: Nathan Scott <nathans@debian.org>
Architecture: i386
Source: attr
Version: 2.4.32-1
Depends: libc6 (>= 2.3.5-1)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.

Package: lighttpd
Status: install ok half-configured
Priority: optional
Section: web
Installed-Size: 732
Maintainer: Debian lighttpd maintainers <pkg-lighttpd-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1.4.13-4etch4
Provides: httpd, httpd-cgi
Depends: libattr1 (>= 2.4.4-1), libbz2-1.0, libc6 (>= 2.3.6-6), libldap2 (>= 2.1.17-1), libpcre3 (>= 4.5), libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1), lsb-base (>= 3.0-3), mime-support
Recommends: php4-cgi | php5-cgi
Suggests: openssl, rrdtool, apache2-utils
Conffiles:
 /etc/lighttpd/conf-available/10-auth.conf 421219cb4a04a693e191ff6a32fa432a
 /etc/lighttpd/conf-available/10-proxy.conf 7b4265f5aed9bd2a7622580016677911
 /etc/lighttpd/conf-available/10-cgi.conf b4fd0fc7d486e32397b380ef85b55f33
 /etc/lighttpd/conf-available/10-simple-vhost.conf cded76d5e184a21bbcf4b651f0ed745f
 /etc/lighttpd/conf-available/10-userdir.conf 761e9bd64422f802c248f69d1fc504a0
 /etc/lighttpd/conf-available/10-ssi.conf a0b0b83fe6060ec23e2d4e4b57a89936
 /etc/lighttpd/conf-available/10-fastcgi.conf aa35e498f47edf5af5836f635b31f3f9
 /etc/lighttpd/conf-available/10-ssl.conf 168706fe944890fa44b74461403da731
 /etc/lighttpd/conf-available/README c376c00aeaa5aa71fba021b15b1bf45e
 /etc/lighttpd/lighttpd.conf 92b4c405bb43e1bec0a9496247bb1035
 /etc/init.d/lighttpd 86abe7ab5e4c3d091f2f6534fb0c9fe4
 /etc/logrotate.d/lighttpd ebf0813469a57c2f16e1c17429befa08
Description: A fast webserver with minimal memory footprint
 lighttpd is a small webserver and fast webserver developed with
 security in mind and a lot of features.
 It has support for
   * CGI, FastCGI and SSI
   * virtual hosts
   * URL rewriting
   * authentication (plain files, htpasswd, ldap)
   * transparent content compression
   * conditional configuration
 and configuration is straight-forward and easy.
 .
  Homepage: http://www.lighttpd.net

Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 204
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Version: 0.9.5-1
Depends: libc6 (>= 2.3.6-6)
Description: System interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, we've created this system-independent API to ease in
 porting and to alleviate the need for several system-dependent packet
 capture modules in each application.
 .
 Further information is available at <URL: http://www.tcpdump.org/>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 620
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 4.1.5-1
Replaces: ssed (<< 3.59)
Pre-Depends: libc6 (>= 2.3.6-6)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 308
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: libidn
Version: 0.6.5-1
Replaces: libidn11-dev
Depends: libc6 (>= 2.3.6-6)
Conflicts: libidn9-dev
Description: GNU libidn library, implementation of IETF IDN specifications
 GNU Libidn is an implementation of the Stringprep, Punycode and IDNA
 specifications defined by the IETF Internationalized Domain Names
 (IDN) working group, used for internationalized domain names.
 Currently the Nameprep, Kerberos 5 and XMPP Stringprep profiles are
 supported.
 .
  Homepage: http://www.gnu.org/software/libidn/

Package: libatm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: Peter De Schrijver (p2) <p2@mind.be>
Architecture: i386
Source: linux-atm
Version: 2.4.1-17
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: atm-tools (<< 2.4.1-6)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
 .
 Homepage: http://linux-atm.sourceforge.net/

Package: linux-image-2.6.23-486-voyage
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 12500
Maintainer: Kim-man "Punky" Tse <punkytse@voyage.hk>
Architecture: i386
Source: linux-source-2.6.23-486-voyage
Version: 5.0-1
Provides: linux-image, linux-image-2.6
Depends: initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, coreutils (>= 5.96)
Pre-Depends: debconf (>= 0.2.17) | debconf-2.0
Suggests: lilo (>= 19.1) | grub, fdutils, linux-doc-2.6.23-486-voyage | linux-source-2.6.23-486-voyage
Description: Linux kernel binary image for version 2.6.23-486-voyage
 This package contains the Linux kernel image for version
 2.6.23-486-voyage.
 .
 It also contains the corresponding System.map file, and the modules
 built by the packager.  It also contains scripts that try to ensure
 that the system is not left in a unbootable state after an update.
 .
 Kernel image packages are generally produced using kernel-package,
 and it is suggested that you install that package if you wish to
 create a custom kernel from the sources. Please look at kernel-img.conf(5),
 and /usr/share/doc/kernel-package/README.gz  from the package kernel-package
 for details on how to tailor the  installation of this or any other kernel
 image package

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 652
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Version: 3.9.5-2etch1
Depends: libc6 (>= 2.3.6-6), libpcap0.8 (>= 0.9.3-1), libssl0.9.8 (>= 0.9.8c-1)
Description: A powerful tool for network monitoring and data acquisition
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect "ping attacks"
 or to monitor network activities.
 .
 Further information is available at <URL: http://www.tcpdump.org/>

Package: liblzo1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 196
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: i386
Source: lzo
Version: 1.08-3
Depends: libc6 (>= 2.3.5-1)
Conflicts: lzop (<= 1.00)
Description: data compression library (old version)
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
 .
 Web site: http://www.oberhumer.com/opensource/lzo/

Package: batmand
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 156
Maintainer: Debian B.A.T.M.A.N maintainers <batmand@packages.qa.debian.org>
Architecture: i386
Version: 0.2-2
Depends: libc6 (>= 2.3.6-6)
Conffiles:
 /etc/default/batmand cca68ffe7ae4d48f4f7ac16e22b63fcd
 /etc/init.d/batmand 453737fa78e57f352ad06c2aa5959322
Description: better approach to mobile adhoc networking
 B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a new
 routing protocol for multi-hop ad-hoc mesh networks.
 .
 The approach of the B.A.T.M.A.N algorithm is to divide the knowledge
 about the best end-to-end paths between nodes in the mesh to all
 participating nodes. Each node perceives and maintains only the
 information about the best next hop towards all other nodes. Thereby
 the need for a global knowledge about local topology changes becomes
 unnecessary. Additionally, an event-based but timeless flooding
 mechanism prevents the accruement of contradicting topology
 information and limits the amount of topology messages flooding the
 mesh. The algorithm is designed to deal with networks that are based
 on unreliable links.

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 428
Maintainer: maximilian attems <maks@sternwelten.at>
Architecture: i386
Source: klibc
Version: 1.4.34-2
Depends: libklibc (= 1.4.34-2)
Description: small statically-linked utilities built with klibc
 This package contains a collection of programs that are statically
 linked against klibc.  These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 200
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libext2fs2, libe2p2
Depends: libc6 (>= 2.3.6-6)
Description: ext2 filesystem libraries
 The ext2fs and e2p libraries are used by programs that directly access
 EXT2 filesystems from usermode programs.   The EXT2 filesystem is very often
 used as the default filesystem on Linux systems.   Various system programs
 that use libext2fs include e2fsck, mke2fs, tune2fs, etc.  Programs that use
 libe2p include dumpe2fs, chattr, and lsattr.

Package: host
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 160
Maintainer: Thomas Seyrat <tomasera@debian.org>
Architecture: i386
Version: 20000331-9
Replaces: dnsutils (<< 1:9.0.0)
Depends: libc6 (>= 2.3.1-1)
Conflicts: dnsutils (<< 1:9.0.0)
Description: utility for querying DNS servers
 'host' is a utility, similar to 'nslookup' (deprecated) or 'dig',
 used to query DNS servers for domain names and zones.
 .
 This package provides the original version of 'host', originally
 in the package 'dnsutils'. BIND9 provides a similar utility, in
 'bind9-host'.

Package: libiksemel3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Thadeu Lima de Souza Cascardo <cascardo@minaslivre.org>
Architecture: i386
Source: libiksemel
Version: 1.2-3
Replaces: libiksemel1
Depends: libc6 (>= 2.3.6-6), libgnutls13 (>= 1.4.0-0)
Conflicts: libiksemel1
Description: C library for the Jabber IM platform
 iksemel handles Jabber connections, parses XML, and sends and
 receives Jabber messages. It works pretty good for parsing other
 kinds of XML, too, if the need arises.

Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 1948
Maintainer: Noèl Köthe <noel@debian.org>
Architecture: i386
Version: 1.10.2-2
Depends: libc6 (>= 2.3.6-6), libssl0.9.8 (>= 0.9.8b-1)
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc eeb265c23bdeb037d384e2da9ccb82a2
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the Web
 using http(s) and ftp, the two most widely used Internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as ftp
 sites -- you can use wget to make mirrors of archives and
 home pages or to travel the Web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both http and ftp) that support it. Both http and ftp
 retrievals can be time stamped, so wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
 .
 http://www.gnu.org/software/wget/

Package: flashybrid
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 88
Maintainer: Diego Iastrubni <diego.iastrubni@xorcom.com>
Architecture: all
Version: 0.16
Depends: debconf (>= 0.5) | debconf-2.0, rsync
Conffiles:
 /etc/flashybrid/config 865f3d5404358c42cf70828432895b5f
 /etc/flashybrid/ramtmp f817d14057d5de976c7db9e8339cef31
 /etc/flashybrid/ramstore 88f7247c1f42e30367b70fcf9f3c9344
 /etc/init.d/flashybrid 29dbe89320473109c4fbec718dc3e972
Description: automates use of a flash disk as the root filesystem
 Flashybrid is a system to help in setting up and managing hybrid
 flash/disk/ram based Debian systems which can run most of the time
 using only a small flash disk for their root filesystem and do a useful,
 but limited task (such as being a router, or a PDA, or a rescue system
 on a USB keydrive). The flash can be as small as 32 mb, though 64 to 256
 mb is more comfortable.
 .
 To use this package, you will need a 2.4 or greater version of the linux
 kernel, with tmpfs support built in.
 .
 Homepage: http://www.xorcom.com/rapid/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 88
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 3.5.11
Replaces: base
Depends: libc6 (>= 2.3.5-1)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libsqlite0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 424
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Source: sqlite
Version: 2.8.17-2
Depends: libc6 (>= 2.3.6-6)
Pre-Depends: debconf (>= 0.5) | debconf-2.0
Description: SQLite shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.

Package: gcc-4.1-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 220
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.1 (4.1.1ds2-21)
Version: 4.1.1-21
Description: The GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 80
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.3.6-6)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

Package: mawk
Status: install ok installed
Priority: required
Section: base
Installed-Size: 220
Maintainer: James Troup <james@nocrew.org>
Architecture: i386
Version: 1.3.3-11
Provides: awk
Pre-Depends: libc6 (>= 2.3.1-1)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: groff-base
Status: purge ok not-installed
Priority: important
Section: text

Package: gnupg
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 4576
Maintainer: James Troup <james@nocrew.org>
Architecture: i386
Version: 1.4.6-2
Replaces: gpg-rsa, gpg-rsaref
Provides: gpg-rsa, gpg-rsaref
Depends: libbz2-1.0, libc6 (>= 2.3.6-6), libldap2 (>= 2.1.17-1), libreadline5 (>= 5.2), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.2.1), gpgv, makedev (>= 2.3.1-13) | devfsd | hurd
Suggests: gnupg-doc, xloadimage
Conflicts: gpg-rsa, gpg-rsaref, suidmanager (<< 0.50), gpg-idea (<= 2.2)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 GnuPG does not use any patented algorithms so it cannot be compatible
 with PGP2 because it uses IDEA (which is patented worldwide).

Package: libnewt0.52
Status: install ok installed
Priority: important
Section: base
Installed-Size: 812
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: i386
Source: newt
Version: 0.52.2-10
Replaces: libnewt-utf8, libnewt0, libnewt0.51
Depends: libc6 (>= 2.3.6-6), libslang2 (>= 2.0.6-3)
Recommends: libfribidi0
Conflicts: libnewt0.51
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.

Package: libdb4.2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 904
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Source: db4.2
Version: 4.2.52+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.2 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.2 Berkeley
 database library.

Package: libdb4.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 956
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Source: db4.3
Version: 4.3.29-8
Depends: libc6 (>= 2.3.6-6)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.3 Berkeley
 database library.

Package: libdb4.4
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1016
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Source: db4.4
Version: 4.4.20-8
Depends: libc6 (>= 2.3.6-6)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.4 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.4 Berkeley
 database library.

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 656
Maintainer: Bernd Eckenfels <ecki@debian.org>
Architecture: i386
Version: 1.60-17
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.3.2.ds1-21)
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".

Package: debconf-i18n
Status: purge ok not-installed
Priority: important
Section: admin

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 644
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 2.5.1.ds2-6
Provides: rgrep
Pre-Depends: libc6 (>= 2.3.6-6)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: libiw28
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 60
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Source: wireless-tools
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Wireless tools - library
 Wireless tools are used to manipulate the Linux Wireless Extensions. The
 Wireless Extension is an interface allowing you to set Wireless LAN specific
 parameters and get the specific stats.
 .
 This package contains the dynamic library libiw.

Package: ebtables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 108
Maintainer: Jochen Friedrich <jochen@scram.de>
Architecture: i386
Version: 2.0.6-3
Depends: libc6 (>= 2.3.2.ds1-4)
Conffiles:
 /etc/ethertypes 94bffde8f75a1b8f891fb780bfe15ca2
Description: Ethernet bridge frame table administration
 Ebtables is used to set up, maintain, and inspect the tables of
 Ethernet frame rules in the Linux kernel. It is analogous to iptables,
 but operates at the MAC layer rather than the IP layer.

Package: libcurl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 304
Maintainer: Domenico Andreoli <cavok@debian.org>
Architecture: i386
Source: curl
Version: 7.15.5-1etch1
Replaces: libcurl2 (<< 1:7.11.2-2)
Depends: libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3), libidn11 (>= 0.5.18), libkrb53 (>= 1.4.2), libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1), ca-certificates
Suggests: libldap2
Description: Multi-protocol file transfer library
 libcurl is designed to be a solid, usable, reliable and portable
 multi-protocol file transfer library.
 .
 SSL support is provided by OpenSSL.
 To enable LDAP support package libldap2-dev is required.
 .
 This is the shared version of libcurl.
 .
  Homepage: http://curl.haxx.se

Package: libsdl1.2debian-alsa
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 500
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: libsdl1.2
Version: 1.2.11-8
Replaces: libsdl1.2-all, libsdl1.2-esd, libsdl1.2-oss, libsdl1.2-arts, libsdl1.2 (<< 1.2.1-1), libsdl1.2debian-all, libsdl1.2debian-arts, libsdl1.2debian-esd, libsdl1.2debian-oss, libsdl1.2debian-nas, libsdl1.2-nas
Depends: libasound2 (>> 1.0.12), libc6 (>= 2.3.6-6), libdirectfb-0.9-25, svgalibg1 | svgalib-dummyg1
Conflicts: libsdl1.2-all, libsdl1.2-esd, libsdl1.2-oss, libsdl1.2-arts, libsdl1.2 (<< 1.2.1-1), libsdl1.2debian-all, libsdl1.2debian-arts, libsdl1.2debian-esd, libsdl1.2debian-oss, libsdl1.2debian-nas, libsdl1.2-nas
Description: Simple DirectMedia Layer (with X11 and ALSA options)
 SDL is a library that allows programs portable low level access to a video
 framebuffer, audio output, mouse, and keyboard.
 .
 This version of SDL is compiled with X11 graphics and ALSA sound.

Package: php5-common
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 568
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: i386
Source: php5
Version: 5.2.0-8+etch10
Depends: sed (>= 4.1.1-1)
Conffiles:
 /etc/php5/conf.d/pdo.ini 3e585ccf0c97d2af10492371bfffb2e3
 /etc/cron.d/php5 fc503f3b6f0d7c2bb88da4b24398e4ec
Description: Common files for packages built from the php5 source
 This package contains the documentation and example files relevant to all
 the other packages built from the php5 source.
 .
 PHP5 is an HTML-embedded scripting language. Much of its syntax is borrowed
 from C, Java and Perl with a couple of unique PHP-specific features thrown
 in. The goal of the language is to allow web developers to write dynamically
 generated pages quickly.
 .
 Homepage: http://www.php.net/

Package: libdirectfb-0.9-25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1800
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: i386
Source: directfb
Version: 0.9.25.1-5
Depends: libc6 (>= 2.3.6-6), libsysfs2
Description: direct frame buffer graphics - shared libraries
 DirectFB is a graphics library which was designed with embedded systems
 in mind. It offers maximum hardware accelerated performance at a minimum
 of resource usage and overhead.
Tag: devel::library, interface::framebuffer, role::shared-lib

Package: libsasl2-2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 236
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: i386
Source: cyrus-sasl2
Version: 2.1.22.dfsg1-8
Replaces: libsasl2
Depends: libc6 (>= 2.3.6-6), libdb4.2
Recommends: libsasl2-modules (= 2.1.22.dfsg1-8)
Conflicts: postfix (<< 2.3.4-3), libsasl2-gssapi-mit (<< 2.1.22), libsasl2-krb4-mit (<< 2.1.22)
Description: Authentication abstraction library
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 This is the Cyrus SASL API implementation, version 2.1.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT Kerberos 5 or MIT
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used. This package is
 unusable without the SASL plugins. Most likely you will need to install
 the libsasl2-modules package.

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2132
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.0.18.1-7
Replaces: manpages (<= 1.15-2), manpages-de (<< 0.4-9), manpages-fi (<< 0.2-4), manpages-fr (<< 1.64.0-1), manpages-hu (<< 20010119-5), manpages-it (<< 0.3.4-3), manpages-ja (<< 0.5.0.0.20050915-1), manpages-ko (<< 20050219-2), manpages-pl (<= 20020406-1), manpages-es (<< 1.55-4), manpages-es-extra (<< 0.8a-15), manpages-ru (<< 0.98-3), manpages-tr, manpages-zh
Depends: libc6 (>= 2.3.6-6), libpam0g (>= 0.76), libselinux1 (>= 1.32), login (>= 970502-1), libpam-modules (>= 0.72-5), debianutils (>= 2.15.2)
Conflicts: shadow-passwd, pam-apps, suidregister (<< 0.50), debconf (<< 0.5)
Conffiles:
 /etc/default/useradd 5b8ca3e449b6a4c4700fa38eefc1fd5c
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 608
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Version: 6.1.6
Replaces: bsdutils (<< 3.0-0)
Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5), bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Conflicts: textutils (<< 2.0-1), suidmanager (<< 0.50)
Conffiles:
 /etc/cron.daily/bsdmainutils f58739ed756eb2efa7b73f377976a5e4
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find when
 they use a BSD-style Unix system.
 .
 Included are: banner, ncal, cal, calendar, col, colcrt, colrm, column, from,
 hexdump, look, lorder, ul, write.
 .
 This package used to contain whois and vacation, which are now distributed in
 their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 80
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: i386
Version: 2.93
Pre-Depends: libc6 (>= 2.3.6-6)
Description: utility to set/show the host name or domain name
 The hostname command can be used to either set or display the current host or
 domain name of the system. This name is used by many of the networking programs
 to identify the machine. The domain name is also used by NIS/YP.

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 44
Maintainer: Nathan Scott <nathans@debian.org>
Architecture: i386
Source: acl
Version: 2.2.41-1
Depends: libattr1 (>= 2.4.4-1), libc6 (>= 2.3.6-6)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 184
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Source: pam
Version: 0.79-5
Replaces: libpam0g-util, libpam0g-dev
Conflicts: libpam0g-util, libpam0g (<< 0.66-0)
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 272
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Version: 2.86.ds1-38
Depends: libc6 (>= 2.3.6-6), libselinux1 (>= 1.32), libsepol1 (>= 1.14)
Pre-Depends: initscripts, sysv-rc (>= 2.86.ds1-1.2) | file-rc (>> 0.7.0), sysvinit-utils
Description: System-V-like init utilities
 This package contains programs required for booting
 a Debian system and doing basic process management.
 .
 The most important program in the package is /sbin/init.
 It is the first process started on boot and continues
 to run as process number 1 until the system halts. All
 other processes are descended from it.

Package: libslang2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1040
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: i386
Source: slang2
Version: 2.0.6-4
Depends: libc6 (>= 2.3.6-6)
Description: The S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 376
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.86.ds1-38
Replaces: mdutils, sysvinit (<< 2.85-12), libc6, libc6.1, libc0.1, libc0.3
Depends: libc6 (>= 2.3.6-6), mount (>= 2.11x-1), e2fsprogs (>= 1.32+1.33-WIP-2003.04.14-1), debianutils (>= 2.13.1), lsb-base (>= 3.0-6), sysvinit-utils
Recommends: psmisc
Conflicts: mdutils, sysv-rc (<< 2.86.ds1-1.2), sysvinit (<< 2.86.ds1-12), udev (<< 0.080-1)
Conffiles:
 /etc/init.d/bootclean ba73d9b2fe36a06d5ba1d7a4388ce6c1
 /etc/init.d/bootlogd c361f2e90d6529f39e8ddfa1333882a9
 /etc/init.d/stop-bootlogd 56052b753e8d7e1667798cebfe7642a2
 /etc/init.d/stop-bootlogd-single 748f19a1d676e1302fad6e05543d88c8
 /etc/init.d/bootmisc.sh 0a1e8ad1c336435ce1426374f02f52bd
 /etc/init.d/checkfs.sh 269c1a249bb852602940b4cee2a34990
 /etc/init.d/checkroot.sh e9e72622ebc86fabcf0c260f757c1741
 /etc/init.d/halt 0b086173bfbd27ceaac08b9e18a8eba5
 /etc/init.d/hostname.sh 1de2d410112a3ea21962879ba38ae46c
 /etc/init.d/killprocs 4819eed8e00676a31de20d78aef567d6
 /etc/init.d/mountall.sh 767d7c398741587fb45e80f1a7f70b7d
 /etc/init.d/mountall-bootclean.sh 8d32e4afb6c491a3360fda2f7e4c860b
 /etc/init.d/mountnfs.sh dea9dca8c2fb98178694c2878ea94b05
 /etc/init.d/mountnfs-bootclean.sh 691c1475bbd2d2f179dffc20b0e7620e
 /etc/init.d/mountdevsubfs.sh 313dacd48ea07c327a25ff1e5de29b2d
 /etc/init.d/mountkernfs.sh be3d11aa159eafbe24b6c9900aab98f5
 /etc/init.d/mtab.sh b949c22869c7b5673b7b6d90d9362f38
 /etc/init.d/rc.local 0cb4f7aa1f6bdc13b6d1becb5f8a0cb2
 /etc/init.d/reboot bad2259cb251395a4d6b7ce7cfc97b94
 /etc/init.d/rmnologin 6901e6e1ddc9c9622203c90c0132aad4
 /etc/init.d/sendsigs 0b2342abb278ed2b1d76f0768d2cb8e9
 /etc/init.d/single 0b4962c7628588a48f05c5f457a08ae8
 /etc/init.d/umountfs cd41e4d500876fd9ba651f5f02f19405
 /etc/init.d/umountnfs.sh e58261decfad1c67e15f718a92910766
 /etc/init.d/umountroot 3e6a08830565a2938fb009b63d8bd0b9
 /etc/init.d/urandom ce40619da442f275ab8928d71c594fe0
 /etc/default/bootlogd 70a108da715299a6e33470eb450669fb
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/tmpfs d959a98cfb571cd7fdfb36bbb3d0a5c8
 /etc/network/if-up.d/mountnfs 2fd587df8284af47c994a1da40fb09c1
Description: Scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 GNU/Linux system at boot time and finalize it at halt or
 reboot time.

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 104
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02 (>= 2:1.02.02-2), libselinux1 (>= 1.32), libsepol1 (>= 1.14)
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 92
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2
Description: command-line interface parsing library
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 .
 It was originally inspired by the Multics SubSystem library.

Package: openvpn
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 896
Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Architecture: i386
Version: 2.0.9-4etch1
Depends: debconf | debconf-2.0, libc6 (>= 2.3.6-6), liblzo2-2, libssl0.9.8 (>= 0.9.8c-1)
Suggests: openssl
Conffiles:
 /etc/network/if-up.d/openvpn db488b1391f00d828d9a96f127ec117d
 /etc/network/if-down.d/openvpn d5e9116a7a9bbf8b3c52c79bc5857d99
 /etc/default/openvpn 83d9c4d24b3cbf0c5dd256b6dd6a9175
 /etc/init.d/openvpn ef3338944a1a9d87388100dd6dd039bc
Description: Virtual Private Network daemon
 An application to securely tunnel IP networks over a single UDP or TCP port.
 It can be used to access remote sites, make secure point to point connections,
 enhance WiFi security, etc.
 .
 OpenVPN uses all of the encryption, authentication, and certification features
 of the OpenSSL library (any cipher, key size, or HMAC digest).
 .
 OpenVPN may use static, pre-shared keys or TLS-based dynamic key exchange.  It
 also supports VPNs with dynamic endpoints (DHCP or dial-up clients), tunnels
 over NAT or connection-oriented stateful firewalls (like Linux's iptables).

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1268
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: i386
Version: 4.2.28-1etch1
Pre-Depends: libc6 (>= 2.3.6-6)
Conffiles:
 /etc/cron.daily/find 7eb265877a0e861849027c1f6ec8e8ec
 /etc/updatedb.conf eeb4970e6b03e2f24d58ee9feb8c9048
Description: utilities for finding files--find, xargs, and locate
 These utilities find files meeting specified criteria and perform
 various actions on the files which are found.

Package: ethtool
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 168
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 5-1
Depends: libc6 (>= 2.3.6-6)
Conflicts: sparc-utils (<< 1.9-1)
Description: display or change ethernet card settings
 ethtool is used for querying settings of an ethernet device and changing them.
 .
 Many ethernet drivers in 2.4 or newer kernel can be queried and tuned using
 ethtool.
 .
 However, backward compatibility is ensured on 2.2 kernel running Sparc with
 SUN Happy Meal (hme) Ethernet card.
 .
  Homepage: http://sourceforge.net/projects/gkernel/

Package: ipsec-tools
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 168
Maintainer: Ganesan Rajagopal <rganesan@debian.org>
Architecture: i386
Version: 1:0.6.6-3.1etch1
Depends: libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3), libkrb53 (>= 1.4.2), libpam0g (>= 0.76), libssl0.9.8 (>= 0.9.8c-1)
Conffiles:
 /etc/ipsec-tools.conf b3bcfb55b6f681b805bbfd7ceff3c205
 /etc/default/setkey b4d1a2a2093adbd0026ce8ec4d539e30
 /etc/init.d/setkey f73f4cc9e8dd54f67fe823838ddf5af6
Description: IPsec tools for Linux
 IPsec-Tools is a port of the KAME IPsec utilities for Linux. It can be
 used with the ipsec implementation in 2.6 and later kernels or with
 the 2.4 backport of the ipsec changes.

Package: quagga
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 4064
Maintainer: Christian Hammers <ch@debian.org>
Architecture: i386
Version: 0.99.5-5etch3
Replaces: zebra, zebra-pj
Depends: libc6 (>= 2.3.6-6), libcap1, libpam0g (>= 0.76), libreadline5 (>= 5.2), logrotate (>= 3.2-11), iproute, debconf (>= 0.5) | debconf-2.0
Pre-Depends: adduser
Suggests: snmpd
Conflicts: zebra, zebra-pj
Conffiles:
 /etc/logrotate.d/quagga c0d1061dfefa9ec42f2731cba813f09e
 /etc/quagga/debian.conf 75f1f1869e5488d3bbcc4c906c18d971
 /etc/quagga/daemons 2eb3d7e597e472881e4798c890491e0c
 /etc/init.d/quagga e796771d5f32465df034ae07b73c449c
 /etc/pam.d/quagga baef1d8dbdb081c0026156e513d41ec6
Description: unoff. successor of the Zebra BGP/OSPF/RIP routing daemon
 GNU Quagga is free software which manages TCP/IP based routing protocols.
 It supports BGP4, BGP4+, OSPFv2, OSPFv3, IS-IS, RIPv1, RIPv2, and RIPng as
 well as the IPv6 versions of these.
 .
 As the precessor Zebra has been considered orphaned, the Quagga project
 has been formed by members of the zebra mailing list and the former
 zebra-pj project to continue developing.
 .
 Quagga uses threading if the kernel supports it, but can also run on
 kernels that do not support threading. Each protocol has its own daemon.
 .
 It is more than a routed replacement, it can be used as a Route Server and
 a Route Reflector.

Package: libsensors3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 272
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Source: lm-sensors
Version: 1:2.10.1-3
Depends: makedev (>= 2.3.1-45) | udev, libc6 (>= 2.3.6-6), libsysfs2
Suggests: lm-sensors
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains a shared library for querying lm-sensors.
 .
  Homepage: http://www.lm-sensors.org

Package: stunnel
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 268
Maintainer: Julien Lemoine <speedblue@debian.org>
Architecture: i386
Version: 2:3.26-dfsg-1
Replaces: stunnel4
Depends: libc6 (>= 2.3.6-6), libssl0.9.8 (>= 0.9.8c-1), libwrap0, openssl, netbase
Description: Universal SSL tunnel for network daemons
 The stunnel program is designed to work  as  SSL  encryption
 wrapper between remote client and local (inetd-startable) or
 remote server. The concept is that having non-SSL aware daemons
 running  on  your  system you can easily setup them to
 communicate with clients over secure SSL channel.
 .
 stunnel can be used to add  SSL  functionality  to  commonly
 used  inetd  daemons  like  POP-2,  POP-3  and  IMAP servers
 without any changes in the programs' code.

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1620
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.39+1.40-WIP-2006.11.14+dfsg-2etch1), libblkid1 (>= 1.34-1), libc6 (>= 2.3.6-6), libcomerr2 (>= 1.34-1), libss2 (>= 1.34-1), libuuid1 (>= 1.34-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf 5a0a719b0d7fb6a786723d79c8e90e14
Description: ext2 file system utilities and libraries
 EXT2 stands for "Extended Filesystem", version 2. It's the main
 filesystem type used for hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining EXT2
 filesystems, and the generic `fsck' wrapper.

Package: libsigc++-2.0-0c2a
Status: purge ok not-installed
Priority: optional
Section: libs

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 556
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: i386
Source: openssh
Version: 1:4.3p2-9
Replaces: ssh, openssh-client (<< 1:3.8.1p1-11), ssh-krb5
Provides: ssh-server
Depends: libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3), libkrb53 (>= 1.4.2), libpam0g (>= 0.76), libselinux1 (>= 1.32), libssl0.9.8 (>= 0.9.8c-1), libwrap0, zlib1g (>= 1:1.2.1), debconf (>= 1.2.0) | debconf-2.0, libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), openssh-client (= 1:4.3p2-9)
Suggests: ssh-askpass, xbase-clients, rssh, molly-guard
Conflicts: ssh (<< 1:3.8.1p1-9), ssh-nonfree (<< 2), ssh-socks, ssh2, sftp, rsh-client (<< 0.16.1-1), ssh-krb5 (<< 1:4.3p2-7)
Conffiles:
 /etc/init.d/ssh 4728def2e1436bfa5fbf6dafc5f4cb30
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/pam.d/ssh 5ad89e19556206e750f3b096fbe9c6b3
Description: Secure shell server, an rshd replacement
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network.  X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide applications with a secure communication channel.
 .
 This package provides the sshd server.
 .
 --------------------------------------------------------------------
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.

Package: dnsmasq
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 580
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Version: 2.35-1
Depends: netbase, libc6 (>= 2.3.6-6), libdbus-1-3, adduser
Suggests: resolvconf
Conflicts: pdnsd, resolvconf (<< 1.15)
Conffiles:
 /etc/init.d/dnsmasq 02a7b72e12ae5e5bcd7c4f178fb22f48
 /etc/default/dnsmasq 231b4ac8df5f70226dbb57b0744c1e77
 /etc/dnsmasq.conf ac098294cd3280fd0cb8a54413530e39
 /etc/resolvconf/update.d/dnsmasq 24cc1bdc4c39759f150b4783ca2f1968
 /etc/dbus-1/system.d/dnsmasq.conf 9041f8e8a00d26b697a078adccf01157
Description: A small caching DNS proxy and DHCP server
 Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP
 server. It is designed to provide DNS and optionally, DHCP, to a
 small network. It can serve the names of local machines which are
 not in the global DNS. The DHCP server integrates with the DNS
 server and allows machines with DHCP-allocated addresses
 to appear in the DNS with names configured either in each host or
 in a central configuration file. Dnsmasq supports static and dynamic
 DHCP leases and BOOTP for network booting of diskless machines.

Package: asterisk
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 5256
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1:1.4.14~dfsg-0.4849
Replaces: asterisk-classic, asterisk-bristuff
Provides: asterisk-classic, asterisk-bristuff
Depends: libasound2 (>> 1.0.12), libc6 (>= 2.3.6-6), libcap1, libcomerr2 (>= 1.33-3), libct3 (>= 0.63-1), libcurl3 (>= 7.15.5-1), libgcc1 (>= 1:4.1.1-12), libgsm1 (>= 1.0.10), libidn11 (>= 0.5.18), libiksemel3, libkrb53 (>= 1.4.2), libncurses5 (>= 5.4-5), libnewt0.52, libogg0 (>= 1.1.3), libpopt0 (>= 1.10), libpq4 (>= 8.1.4), libpri1.0 (>= 1.4), libradiusclient-ng2, libsensors3 (>= 1:2.10.1), libsnmp9 (>= 5.2.3), libspeex1 (>= 1.1.8), libsqlite0 (>= 2.8.17), libssl0.9.8 (>= 0.9.8c-1), libstdc++6 (>= 4.1.1-12), libtonezone1 (>= 1:1.4.5.1.xpp.r4648), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libwrap0, unixodbc (>= 2.2.11-1), zlib1g (>= 1:1.2.1), asterisk-config (= 1:1.4.14~dfsg-0.4849) | asterisk-config-custom, adduser, asterisk-sounds-main
Suggests: ekiga, ohphone, twinkle, kphone, asterisk-doc, asterisk-dev, asterisk-h323
Conflicts: asterisk-classic, asterisk-bristuff
Conffiles:
 /etc/default/asterisk fb83913fd31654c90feec9bda1e62233
 /etc/init.d/asterisk 4883e9a42aec964ac63c3da31e890f2e
Description: Open Source Private Branch Exchange (PBX)
 Asterisk is an Open Source PBX and telephony toolkit.  It is, in a
 sense, middleware between Internet and telephony channels on the bottom,
 and Internet and telephony applications at the top.
 .
 Asterisk can be used with Voice over IP (SIP, H.323, IAX and more) standards,
 or the Public Switched Telephone Network (PSTN) through supported hardware.
 .
 Supported hardware:
 .
  * All Wildcard (tm) ISDN PRI cards from Digium (http://www.digium.com)
  * HFC-S/HFC-4S-based ISDN BRI cards (Junghanns.NET, beroNet, Digium etc.)
  * All TDM (FXO/FXS) cards from Digium
  * Various clones of Digium cards such as those by OpenVox
  * Xorcom Astribank USB telephony adapter (http://www.xorcom.com)
  * Voicetronix OpenPCI, OpenLine and OpenSwitch cards
  * CAPI-compatible ISDN cards (using the add-on package chan-capi)
  * Full Duplex Sound Card (ALSA or OSS) supported by Linux
  * Tormenta T1/E1 card (http://www.zapatatelephony.org)
  * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net)
 .
 This is the main package that includes the Asterisk daemon and most channel
 drivers and applications.

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 56
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: all
Version: 2007.07.31~etch1
Depends: gnupg (>= 1.0.6-4)
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: snmpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 976
Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Architecture: i386
Source: net-snmp
Version: 5.2.3-7etch2
Replaces: snmptraplogd
Depends: libc6 (>= 2.3.6-6), libsensors3 (>= 1:2.10.1), libsnmp9 (>= 5.2.3), libwrap0, adduser, debconf
Conflicts: snmp (<< 3.6-3), snmptraplogd
Conffiles:
 /etc/default/snmpd a6bc1c3f7a7f23ece2e019cfa6dd6f2c
 /etc/snmp/snmpd.conf 152d349fcd18ec08f1a31cb4c3e2681b
 /etc/snmp/snmptrapd.conf a2ee110581a5a9a1e2252400cb176bcc
 /etc/init.d/snmpd bf19aaf81bccad8d323cbcd083d42a85
Description: NET SNMP (Simple Network Management Protocol) Agents
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.  The NET SNMP agent is a daemon which listens for
 incoming SNMP requests from clients and provides responses.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 228
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.3.5-15
Depends: debianutils (>= 1.6)
Pre-Depends: libc6 (>= 2.3.6-6)
Suggests: less
Description: The GNU compression utility
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6296
Origin: debian
Maintainer: Dpkg Developers <team@dpkg.org>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Version: 1.13.25
Replaces: dpkg-doc-ja, dpkg-static, manpages-de (<= 0.4-3), manpages-pl (<= 20051117-1)
Pre-Depends: libc6 (>= 2.3.6-6), coreutils (>= 5.93-1)
Suggests: apt, lzma
Conflicts: sysvinit (<< 2.82-1), dpkg-iasearch (<< 0.11), dpkg-static, dpkg-dev (<< 1.10)
Conffiles:
 /etc/dpkg/dpkg.cfg a56f60fb9ab2a5cfe8ea3b30ea6fa35c
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/logrotate.d/dpkg 501f8c90b83c7ea180868ca82e1e82d1
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
Description: package maintenance system for Debian
 This package contains the low-level commands for handling the installation
 and removal of packages on your system.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 348
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: i386
Source: pcre3
Version: 6.7+7.4-2
Depends: libc6 (>= 2.3.6-6)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: aptitude
Status: purge ok not-installed
Priority: important
Section: admin

Package: libncursesw5
Status: purge ok not-installed
Priority: important
Section: libs

Package: libgea2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Andre Herms <aherms@ivs.cs.uni-magdeburg.de>
Architecture: i386
Version: 2.2
Depends: libc6 (>= 2.3.6-6), libgcc1 (>= 1:4.1.1-12), libstdc++6 (>= 4.1.1-12)
Conflicts: libgea
Description: GEA - an abstraction layer for developing network protocols
 The GEA libray provides an abstraction layer for network protocols.
 Functions , e.g. like sending packets, are provided and mapped to the
 underlying system. This is by default the POSIX-API. But other
 platforms can also provide an implementation. Currently such an
 implementation exists for the ns-2. This allow protocols developed
 with GEA to run on native POSIX platforms (like Linux or Unix). But
 the same implementation can be used in the ns-2 network simulator. By
 this the protocol implementation can be tested in large simulated
 networks.

Package: liblocale-gettext-perl
Status: purge ok not-installed
Priority: important
Section: perl

Package: info
Status: purge ok not-installed
Priority: important
Section: doc

Package: libopencdk8
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 228
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Source: opencdk8
Version: 0.5.9-2
Replaces: libopencdk4 (= 0.4.3-1)
Depends: libc6 (>= 2.3.6-6), libgcrypt11 (>= 1.2.2), libgpg-error0 (>= 1.4), zlib1g (>= 1:1.2.1)
Conflicts: libopencdk4 (= 0.4.3-1), libopencdk8.11
Description: Open Crypto Development Kit (OpenCDK) (runtime)
 This library provides functions to handle basic parts of the OpenPGP
 message format.
 .
 The aim of the library is *not* to replace any available PGP version.
 There will be no real support for key management (sign, revoke, alter
 preferences, ...) and some other parts are only rudimentarily
 available. The main purpose is to handle and understand OpenPGP
 packets and to execute basic operations on them. For example to
 encrypt/decrypt or to sign/verify keys and some packet routines.
 .
 Because of the fact that sensitive data is being handled, the
 library doesn't contain any real cryptographic code. The libgcrypt
 package is used for all crypto routines.
 .
 This package contains the runtime library for OpenCDK.

Package: olsrd-plugins
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 324
Maintainer: Holger Levsen <holger@debian.org>
Architecture: i386
Source: olsrd
Version: 0.5.5-1
Depends: libc6 (>= 2.3.6-6), olsrd (= 0.5.5-1)
Description: various plugins to enhance olsrd
 olsrd is an implementation of the Optimized Link State Routing protocol
 for Mobile Ad-Hoc networks(MANET)
 .
 The following plugins are available:
 .
  * httpinfo      - tiny webserver for information purposes
  * dyn_gw        - dynamically announce uplinks
  * dot_draw      - generates output (over a TCP socket) in the dot format
  * secure        - secure OLSR routing with a shared key
  * nameservice   - announce hostnames and dns servers

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 120
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: i386
Source: iputils
Version: 3:20020927-6
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.3.6-6)
Conflicts: ping, suidmanager (<< 0.50)
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: svgalibg1
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 20
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: all
Source: svgalib
Version: 1:1.4.3-24
Depends: libsvga1
Description: transitional dummy package which can be safely removed
 This package is only useful to ensure clean upgrades from old Debian
 releases and can be safely removed.
Tag: role::dummy

Package: diff
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 744
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Source: diffutils
Version: 2.8.1-11
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: diff-doc
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 92
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: bzip2
Version: 1.0.3-6
Depends: libc6 (>= 2.3.6-6)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
 .
  Homepage: http://www.bzip.org/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 13236
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: i386
Version: 5.8.8-7etch1
Replaces: perl-base (<< 5.8.8-1), perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1), libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl
Provides: data-dumper, perl5, libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl
Depends: perl-base (= 5.8.8-7etch1), perl-modules (>= 5.8.8-7etch1), libc6 (>= 2.3.6-6), libdb4.4, libgdbm3
Recommends: perl-doc
Suggests: libterm-readline-gnu-perl | libterm-readline-perl-perl
Conflicts: data-dumper, perl-5.004 (<< 6), perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.8-1), libdigest-md5-perl (<< 3.07-1), libmime-base64-perl (<< 3.07-1), libtime-hires-perl (<< 1.86-1), libstorable-perl (<< 2.15-1)
Description: Larry Wall's Practical Extraction and Report Language
 An interpreted scripting language, known among some as "Unix's Swiss
 Army Chainsaw".
 .
 Perl is optimised for scanning arbitrary text files and system
 administration.  It has built-in extended regular expression matching
 and replacement, a data-flow mechanism to improve security with
 setuid scripts and is extensible via modules that can interface to C
 libraries.

Package: ethstatus
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 84
Maintainer: Aurélien GÉRÔME <ag@roxor.cx>
Architecture: i386
Version: 0.4.3
Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5)
Description: console-based ethernet statistics monitor
 Ethstatus is a console-based monitoring utility for displaying
 statistical data of the ethernet interface on a quantity basis.
 It is similar to iptraf but is meant to run as a permanent console
 task to monitor the network load.

Package: vtun
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 252
Maintainer: Martín Ferrari <martin.ferrari@gmail.com>
Architecture: i386
Version: 2.6-7
Depends: libc6 (>= 2.3.6-6), liblzo1, libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1), debconf | debconf-2.0
Conffiles:
 /etc/modutils/vtund/vtun-mod 49f9008b76e507e5d618eca8e30aaf9e
 /etc/vtund.conf 5778f9d5299eafd4520623a2d069107d
 /etc/logrotate.d/vtun e69b04f6073b0477c7edfb798ae88de3
 /etc/init.d/vtun 8ceb6539c299907f6ce5fa326a3d627f
Description: Virtual Tunnel over TCP/IP Networks
 VTun is the easiest way to create Virtual Tunnels over TCP/IP networks
 with traffic shaping and compression.
 .
 It supports IP, PPP, SLIP, Ethernet and other tunnel types.
 .
 VTun is easily and highly configurable, it can be used for various
 network tasks.
 .
 VTun requires the Universal TUN/TAP kernel module which can be found at
 http://vtun.sourceforge.net/tun/index.html or in the 2.4 and newer linux
 kernel.
 .
 Note: This program includes an "encryption" feature intended to protect the
 tunneled data as it travels across the network. However, the protocol it uses
 is known to be very insecure, and you should not rely on it to deter anyone
 but a casual eavesdropper. See the included README.Encryption file for more
 information.
 .
 Homepage: http://vtun.sourceforge.net/

Package: sysklogd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 212
Maintainer: Martin Schulze <joey@debian.org>
Architecture: i386
Version: 1.4.1-18
Replaces: syslogd
Provides: syslogd, system-log-daemon
Depends: libc6 (>= 2.3.6-6), klogd | linux-kernel-log-daemon
Conflicts: syslogd
Conffiles:
 /etc/default/syslogd 723ca7411cc4fb42e9808b9dea96fa94
 /etc/syslog.conf 3882195aa34cd97b8a57120bc8b47f3b
 /etc/init.d/sysklogd 16b273f31066826a12288300d01bf612
 /etc/cron.daily/sysklogd 8833b454483b226af0e05ad7b0f5c81e
 /etc/cron.weekly/sysklogd 1ab715bb418b05c9dfceca01e695d146
Description: System Logging Daemon
 This package implements the system log daemon, which is an enhanced
 version of the standard Berkeley utility program. It is responsible
 for providing logging of messages received from programs and facilities
 on the local host as well as from remote hosts.

Package: wireless-tools
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 256
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: i386
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28 (>= 28)
Conffiles:
 /etc/network/if-pre-up.d/wireless-tools e95ae0b172b744370a400140059d52d4
 /etc/network/if-post-down.d/wireless-tools 5ddd964cf276955df3353def88eb5268
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate
 the Linux Wireless Extensions. The Wireless Extension is an interface
 allowing you to set Wireless LAN specific parameters and get the
 specific stats.

Package: zaptel-modules-2.6.23-486-voyage
Status: install ok installed
Priority: extra
Section: comm
Installed-Size: 1656
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: zaptel (1:1.4.9~dfsg-1)
Version: 1:1.4.9~dfsg-1+5.0-1
Provides: zaptel-modules
Description: zaptel modules for Linux (kernel 2.6.23-486-voyage).
 This package contains the set of loadable kernel modules for the
 zapata telephony API.
 This package contains the compiled kernel modules for 2.6.23-486-voyage
 .
 In order to compile these modules use the module-assistant utility.

Package: libradiusclient-ng2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: radiusclient-ng
Version: 0.5.3-2
Depends: libc6 (>= 2.3.6-6)
Conffiles:
 /etc/radiusclient-ng/radiusclient.conf 325fa128cd127397d592565696fc101b
 /etc/radiusclient-ng/dictionary.ascend 0563b256ecee3cc74d9ea456f1b27b04
 /etc/radiusclient-ng/dictionary.compat df857f4acd1f3e5b673e5a76c32033eb
 /etc/radiusclient-ng/dictionary.merit 88ac9472f94481602095184c5378c561
 /etc/radiusclient-ng/dictionary.sip 2ab041cda673907c3c6ceb5a424e7aa4
 /etc/radiusclient-ng/dictionary d76f73448f1ff26263a4052e7f25f6a5
 /etc/radiusclient-ng/servers cda7d711b2c3989761396178a707cbfb
Description: Enhanced RADIUS client library
 Radiusclient-ng library is an enhanced version of the libradius1,
 the RADIUS client library. Radiusclient-ng contains vastly improved
 API and many additional bug fixes. The library is also more efficient
 than the original version.

Package: lilo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1128
Maintainer: Andrés Roldán <aroldan@debian.org>
Architecture: i386
Version: 1:22.6.1-9.3
Depends: mbr, debconf (>= 1.2.9), libc6 (>= 2.3.6-6), libdevmapper1.02 (>= 2:1.02.02-2)
Suggests: lilo-doc
Conflicts: manpages (<< 1.29-3)
Description: LInux LOader - The Classic OS loader can load Linux and others
 This Package contains lilo (the installer) and boot-record-images to
 install Linux, OS/2, DOS and generic Boot Sectors of other OSes.
 .
 You can use LILO to manage your Master Boot Record (with a simple text screen,
 text menu or colorful splash graphics) or call LILO from other Boot-Loaders to
 jump-start the Linux kernel.

Package: libvorbis0a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 216
Maintainer: Debian Xiph.org Maintainers <pkg-xiph-maint@lists.alioth.debian.org>
Architecture: i386
Source: libvorbis
Version: 1.1.2.dfsg-1.3
Replaces: libvorbis0
Depends: libc6 (>= 2.3.6-6), libogg0 (>= 1.1.3)
Conflicts: libvorbis0
Description: The Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbis library is the primary Ogg Vorbis library.

Package: pptpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 232
Maintainer: Rene Mayrhofer <rmayr@debian.org>
Architecture: i386
Version: 1.3.0-2etch2
Depends: libc6 (>= 2.3.6-6), libwrap0, ppp (>= 2.4.4), netbase, debconf | debconf-2.0, bcrelay
Conffiles:
 /etc/pptpd.conf 491b2f711244dd55849da1ec7bed51c1
 /etc/ppp/pptpd-options a3c6e8c72b5b360688d6d0df2768f689
 /etc/init.d/pptpd bc59c184be4fe8e9771fb8b815ff3b45
 /etc/ppp/pptpd-options newconffile
 /etc/init.d/pptpd newconffile
 /etc/pptpd.conf newconffile
Description: PoPToP Point to Point Tunneling Server
 This implements a Virtual Private Networking Server (VPN) that is compatible
 with Microsoft VPN clients. It allows windows users to connect to an
 internal firewalled network using their dialup.

Package: dselect
Status: purge ok not-installed
Priority: required
Section: admin

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 176
Maintainer: Brian White <bcwhite@pobox.com>
Architecture: all
Version: 3.39-1
Recommends: file (>= 3.27-3)
Conflicts: a2ps (<< 4.10.4), metamail (<< 2.7-44)
Conffiles:
 /etc/mime.types 6937310fbfef61c04cb80dc689624253
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.

Package: libvolume-id0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 120
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: udev
Version: 0.105-4
Depends: libc6 (>= 2.3.6-6)
Description: libvolume_id shared library
 This library is used to detect the type of a file system and read its
 metadata.

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 168
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.86.ds1-38
Replaces: last, sysvinit (<= 2.86.ds1-22)
Depends: libc6 (>= 2.3.6-6), libselinux1 (>= 1.32), libsepol1 (>= 1.14)
Conflicts: last
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, sulogin

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 296
Maintainer: Javier Fernandez-Sanguino Pen~a <jfs@computer.org>
Architecture: i386
Version: 3.0pl1-100
Depends: libc6 (>= 2.3.6-6), libpam0g (>= 0.76), libselinux1 (>= 1.32), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, lockfile-progs, checksecurity
Conflicts: suidmanager (<< 0.50), lockfile-progs (<< 0.1.7)
Conffiles:
 /etc/init.d/cron 660cbe5908755bd84720fb9f526c3570
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/standard 8df6fb493656d1e2f9ee58e2678565ab
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 0648b7b3c0a12ff15eab7e3bb948e79a
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/pam.d/cron cb94bf7627e6ef2fc1f5164b39df1e00
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/standard 597fcd12507f76fb847cc0174ad98b63
Description: management of regular background processing
 cron is a background process (`daemon') that runs programs at regular
 intervals (for example, every minute, day, week or month); which
 processes are run and at what times are specified in the `crontab'.
 .
 Users may also install crontabs so that processes are run on
 their behalf, though this feature can be disabled or restricted to
 particular users.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package is configured by default to do various standard
 system maintenance tasks, such as ensuring that logfiles do not
 grow endlessly and overflow the disk.
 .
 The lockfile-progs package is only a "Suggests" because of the poor
 way that dselect handles "Recommends", but I do strongly suggest that
 you install it; it prevents /etc/cron.daily/standard from running multiple
 times if something gets jammed.

Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 160
Maintainer: Pawel Wiecek <coven@debian.org>
Architecture: i386
Source: libedit
Version: 2.9.cvs.20050518-2.2
Depends: libc6 (>= 2.3.2.ds1-21), libncurses5 (>= 5.4-5)
Description: BSD editline and history libraries
 The editline library provides generic line editing and
 history functions.
 .
 It slightly resembles GNU readline

Package: libsasl2
Status: install ok installed
Priority: important
Section: oldlibs
Installed-Size: 72
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: i386
Source: cyrus-sasl2
Version: 2.1.22.dfsg1-8
Depends: libsasl2-2 (= 2.1.22.dfsg1-8)
Description: Authentication abstraction library
 This is a transitional dummy package.  If nothing depends on it, this
 package can be safely removed.

Package: nano
Status: purge ok not-installed
Priority: important
Section: editors

Package: unixodbc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 788
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Version: 2.2.11-13
Depends: libc6 (>= 2.3.5-1), libltdl3 (>= 1.5.2-2), libreadline5 (>= 5.1), odbcinst1debian1 (>= 2.2.11-3)
Suggests: libmyodbc, odbc-postgresql, libct1
Conflicts: unixodbc-bin (<< 2.2.4-1)
Description: ODBC tools libraries
 Binaries and libraries from the unixODBC package.
  COMPONENTS:
 .
  libodbc.so.1        (ODBC Driver Manager)
  libodbctxt.so       (driver for Text files)
  dltest              (simple cmd line tool)
  isql                (cmd line tool... batch & interactive SQL)

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 212
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: i386
Source: libselinux
Version: 1.32-3
Depends: libc6 (>= 2.3.6-6), libsepol1 (>= 1.14)
Description: SELinux shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux. Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux API.

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 1520
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: i386
Source: openssh
Version: 1:4.3p2-9
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3), libedit2 (>= 2.5.cvs.20010821-1), libkrb53 (>= 1.4.2), libncurses5 (>= 5.4-5), libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1), debconf (>= 1.2.0) | debconf-2.0, adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Suggests: ssh-askpass, xbase-clients
Conflicts: ssh (<< 1:3.8.1p1-9), sftp, rsh-client (<< 0.16.1-1), ssh-krb5 (<< 1:4.3p2-7)
Conffiles:
 /etc/ssh/ssh_config 8370bdaa84a872a87bfe0ed93eac6479
 /etc/ssh/moduli 45e8268b1994ab38d5309eed05ba003c
Description: Secure shell client, an rlogin/rsh/rcp replacement
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network.  X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide applications with a secure communication channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 --------------------------------------------------------------------
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.

Package: ntpdate
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 208
Maintainer: Debian NTP Team <pkg-ntp-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: ntp
Version: 1:4.2.2.p4+dfsg-2
Depends: netbase, libc6 (>= 2.3.6-6), libcap1, libssl0.9.8 (>= 0.9.8c-1)
Conffiles:
 /etc/network/if-up.d/ntpdate c6383d710518c199a2a2321aa4ba410b
 /etc/dhcp3/dhclient-enter-hooks.d/ntpdate 714c145c22765fdfef242d456307e1c4
 /etc/default/ntpdate 71d857cae72ae1f53380ea4f2e38cb2e
 /etc/logcheck/ignore.d.server/ntpdate 8fc5628e78c8b27667ff8b9e8ab99c30
Description: client for setting system time from NTP servers
 NTP, the Network Time Protocol, is used to keep computer clocks
 accurate by synchronizing them over the Internet or a local network,
 or by following an accurate hardware receiver that interprets GPS,
 DCF-77, NIST or similar time signals.
 .
 ntpdate is a simple NTP client that sets a system's clock to match
 the time obtained by communicating with one or more NTP servers.  It
 is not sufficient, however, for maintaining an accurate clock in the
 long run.  ntpdate by itself is useful for occasionally setting the
 time on machines that do not have full-time network access, such as
 laptops.
 .
 If the full NTP daemon from the package "ntp" is installed, then
 ntpdate is not necessary.
 .
 Web sites: http://ntp.isc.org/ and http://www.ntp.org/

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 11036
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Source: glibc
Version: 2.3.6.ds1-13etch5
Replaces: ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks, libc6-bin, netkit-rpc, netbase (<< 4.0)
Provides: glibc-2.3.6.ds1-1, glibc-2.3.6-2
Depends: tzdata
Suggests: locales, glibc-doc
Conflicts: strace (<< 4.0-0), libnss-db (<= 2.2-6.1.1), timezone, timezones, gconv-modules, libtricks, libc6-doc, libc5 (<< 5.4.33-7), libpthread0 (<< 0.7-10), libc6-bin, libwcsmbs, apt (<< 0.3.0), libglib1.2 (<< 1.2.1-2), netkit-rpc, wine (<< 0.0.20031118-1), cyrus-imapd (<< 1.5.19-15), e2fsprogs (<< 1.35-7), initrd-tools (<< 0.1.84.1), libterm-readline-gnu-perl (<< 1.15-2)
Conffiles:
 /etc/init.d/glibc.sh e962bedb636c5499e97ce457878a754a
 /etc/ld.so.conf.d/i486-linux-gnu.conf 36f09aeeab18f6af453d0a1db0a0942c
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.

Package: klogd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 140
Maintainer: Martin Schulze <joey@debian.org>
Architecture: i386
Source: sysklogd
Version: 1.4.1-18
Replaces: sysklogd
Provides: linux-kernel-log-daemon
Depends: libc6 (>= 2.3.6-6), sysklogd | system-log-daemon
Conflicts: sysklogd (<= 1.3-33)
Conffiles:
 /etc/default/klogd beacf91aa59706294d09f98b40a8613c
 /etc/init.d/klogd 5506c3223e773c59c3cf26857ca4dad1
Description: Kernel Logging Daemon
 The klogd daemon listens to kernel message sources and is responsible
 for prioritizing and processing operating system messages.  The klogd
 daemon can run as a client of syslogd or optionally as a standalone
 program.  Klogd can now be used to decode EIP addresses if it can
 determine a System.map file.

Package: dhcp3-common
Status: purge ok not-installed
Priority: important
Section: net

Package: hostap-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 212
Maintainer: Andres Salomon <dilinger@debian.org>
Architecture: i386
Version: 1:0.4.0-1
Depends: libc6 (>= 2.3.2.ds1-21)
Conffiles:
 /etc/network/if-pre-up.d/hostap-utils 39aa894f6348d64bdf07eb84aece9e86
 /etc/pcmcia/hostap_cs.conf 9b8e1e9f1d8b7717be46ebc8285aa2e0
 /etc/hotplug/blacklist.d/hostap-utils 6932020e1bc1926f0f500715c52fcff0
 /etc/discover.d/hostap-utils 746400d5b353ef53666bc214b3945696
Description: Utility programs for Host AP driver for Intersil Prism2/2.5/3
 This is a Linux driver for wireless LAN cards based on Intersil's Prism2/2.5/3
 chipset. The driver supports a so called Host AP mode, i.e., it takes care
 of IEEE 802.11 management functions in the host computer and acts as an
 access point. This does not require any special firmware for the wireless
 LAN card. In addition to this, it has support for normal station operations
 in BSS and possible also in IBSS.
 .
 This packages contains binary utilities for use with hostap.

Package: asterisk-config
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 984
Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Architecture: all
Source: asterisk
Version: 1:1.4.14~dfsg-0.4849
Recommends: asterisk
Conflicts: asterisk-config-custom
Conffiles:
 /etc/asterisk/asterisk.adsi 4f3cc3a14bc61bb6e2cca9ef4cfb5a4b
 /etc/asterisk/telcordia-1.adsi d0982786eeb75b202c3d7395fae35cad
 /etc/asterisk/adsi.conf f6caea2b9a8606aedfe3c6c50ceda7dc
 /etc/asterisk/adtranvofr.conf 10484834d5e298723f65546911219197
 /etc/asterisk/agents.conf 710331936e2197eb547b9378f65a7c4c
 /etc/asterisk/alarmreceiver.conf f8f9f8c03d74c47991d3db8a1c0c9f30
 /etc/asterisk/alsa.conf 6be07e7eff48ef663a2886232a8482e1
 /etc/asterisk/amd.conf 38bc9e65bd30515c0580b5b8b55997a7
 /etc/asterisk/cdr.conf 2756563d2496cb79ae2623f6f9e1ff54
 /etc/asterisk/cdr_custom.conf d9512eac366bf5de92ba42dcd483cc71
 /etc/asterisk/cdr_manager.conf 25b51495e3431245879aa7c2cc8266cd
 /etc/asterisk/cdr_odbc.conf 827ed2d8a5ffe616b604daedeafc35c2
 /etc/asterisk/cdr_pgsql.conf 4427c92e84765ff7d129d7313279aa25
 /etc/asterisk/cdr_tds.conf 0a8595317ebcc39eeeb605f804a07c03
 /etc/asterisk/codecs.conf 96c73b7456a11d3636e23672c976b9d7
 /etc/asterisk/dnsmgr.conf 514db18bfedf575a725fe70469d0095a
 /etc/asterisk/dundi.conf 5c4f5e64ef81ea56933dafe79d6f13dd
 /etc/asterisk/enum.conf d4c93f1adf733b22dcc57857d8c2ec47
 /etc/asterisk/esel.conf 1b401d1eb7f73db49416d70349173823
 /etc/asterisk/extconfig.conf 6ffc409aa04fb412b2ceccb6f7a99e93
 /etc/asterisk/extensions.ael 680222a5ccddc1b4a71267999a56b6b5
 /etc/asterisk/extensions.conf 7b1368bb847790a5ff3ee6e3e2a4ca1e
 /etc/asterisk/features.conf 96936bd2950ed652e926ff5de093ec40
 /etc/asterisk/festival.conf 0ca48286316ab6930daca79199e75f62
 /etc/asterisk/followme.conf f4a89849168a0cb46c4a390d4a045be8
 /etc/asterisk/func_odbc.conf 2de20b89f30929533123bd32ef885729
 /etc/asterisk/gtalk.conf 3b87f98028efc77c8a0b49f4a75cea5f
 /etc/asterisk/h323.conf aa8864064489c774c1c3fc616d459a0a
 /etc/asterisk/http.conf abc7a60da2292bbe057a316ef3919eec
 /etc/asterisk/iax.conf eb65cda723f06e339a9bde258fb8dfd7
 /etc/asterisk/iaxprov.conf ab525d3056cba32e47bd225e1f5b82a0
 /etc/asterisk/indications.conf 2748213e93a568fd3e9cd8720f3e2b62
 /etc/asterisk/jabber.conf bd427858694a2e28ed634f44dccd2642
 /etc/asterisk/logger.conf e29f3764c0db922c20fb00ae7e0bad66
 /etc/asterisk/manager.conf 40273451ded8e62b4f5d9ff52e23cda8
 /etc/asterisk/meetme.conf 22754c4992e4bf8c99265134046dd8b3
 /etc/asterisk/mgcp.conf 4bf42a6301b2abe8b2b554d21a923374
 /etc/asterisk/misdn.conf 1c493e5b82e2aca2a192b8622062ae06
 /etc/asterisk/modules.conf c83e9d737e1ec6a81e42e98e96764098
 /etc/asterisk/musiconhold.conf 121ebecc50b8d2223478133b65d3e046
 /etc/asterisk/muted.conf eba4097713b470c62ecf62de0da65816
 /etc/asterisk/osp.conf f8cb767c9532c0676e0b706e288b3858
 /etc/asterisk/oss.conf 7de3c022269080a39df688ecf3c21626
 /etc/asterisk/phone.conf c88aea8b97d9083b4f56198ba8340ab2
 /etc/asterisk/privacy.conf 0e6eb2c35cd1ef9232910793f1dc5a44
 /etc/asterisk/queues.conf b25f506415d0e30dede002866c94f602
 /etc/asterisk/res_odbc.conf 241435b37a40d322766c3a71dfe3eac5
 /etc/asterisk/res_pgsql.conf 7e8bd91309b9526320e3bdfda5471bf8
 /etc/asterisk/res_snmp.conf cf7163a1f761797a82c403df06cfa048
 /etc/asterisk/rpt.conf c604cb8b93e91b2f1a865de4fb513a0d
 /etc/asterisk/rtp.conf 07e5f54500c2d0c67a485a976b35fd63
 /etc/asterisk/say.conf 99f502acae1c850b997430019a70324c
 /etc/asterisk/sip.conf 2d8d41bda7c82d08d54b1bfbd635495e
 /etc/asterisk/sip_notify.conf 42ca0a423ad2ee1772e6a93450aea661
 /etc/asterisk/skinny.conf 114757d36877c9bbaf5810e52dec2237
 /etc/asterisk/sla.conf a9f77365cdd0c7556c37729da653afc2
 /etc/asterisk/smdi.conf a7e64456a64b4c2f68d06df168d4908b
 /etc/asterisk/udptl.conf 8503d117795be1e265bd3a68132b0964
 /etc/asterisk/users.conf 010161d61354089bce664d0d5193bc04
 /etc/asterisk/voicemail.conf ee8eeefd52bee653a7e35c75ad1a2338
 /etc/asterisk/vpb.conf 9984d95ab34051bdbbc5d9afd677a170
 /etc/asterisk/watchdog.conf 74d40ec7677b8dd37929a23152a2cc49
 /etc/asterisk/zapata.conf e4f8e77100897bc9f11da8a33c6ffa60
 /etc/asterisk/asterisk.conf 26d4ef859a8c7862a4076f03d67407c0
Description: Configuration files for Asterisk
 Asterisk is an Open Source PBX and telephony toolkit.
 .
 This package contains the default configuration files of Asterisk.

Package: libconsole
Status: purge ok not-installed
Priority: optional
Section: libs

Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 484
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Source: apt
Version: 0.6.46.4-0.1
Replaces: apt (<< 0.5.9)
Provides: libapt-inst-libc6.3-6-1.1
Depends: libapt-pkg-libc6.3-6-3.11, libc6 (>= 2.3.6-6), libdb4.4, libgcc1 (>= 1:4.1.1-12), libstdc++6 (>= 4.1.1-12)
Description: APT utility programs
 This package contains some APT utility programs such as apt-ftparchive,
 apt-sortpkgs and apt-extracttemplates.
 .
 apt-extracttemplates is used by debconf to prompt for configuration
 questions before installation. apt-ftparchive is used to create Package
 and other index files. apt-sortpkgs is a Package/Source file normalizer.

Package: libtonezone1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 252
Maintainer: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Architecture: i386
Source: zaptel
Version: 1:1.4.7.xpp.r5178-2
Depends: libc6 (>= 2.3.6-6)
Description: tonezone library (runtime)
 A library for generating tones used for telephone signalling.

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 900
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 0.105-4
Replaces: initramfs-tools (<= 0.41)
Depends: libc6 (>= 2.3.6-6), libselinux1 (>= 1.32), libvolume-id0 (>= 0.103-1), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 3.0-6)
Pre-Depends: debconf (>= 0.5) | debconf-2.0
Conflicts: hotplug, initscripts (<< 2.85-16), lvm-common (<< 1.5.13), module-init-tools (<< 3.2.2-1), initramfs-tools (<< 0.39), hal (<< 0.5.6-2), makedev (<< 2.3.1-80), klibc-utils (<= 1.4.19-1)
Conffiles:
 /etc/modprobe.d/pnp-hotplug 57e7aba8b91e5a19028a0303065a1901
 /etc/modprobe.d/display_class 34eba9ad8e27d458fc5efbaa3a88f2a5
 /etc/modprobe.d/blacklist c8770183ed0c9f92b7a7d7fba17a82df
 /etc/init.d/udev 2bc40f9c9f319324363889ad647bcfe8
 /etc/init.d/udev-mtab 82a581c2e19b357c35c83124dd0caaa3
 /etc/udev/hotplugd.rules 8c1a56d9a0fa8ee99b8104c9e17776f5
 /etc/udev/udev.conf 3f1d43d19e4e26fc4f87bbaa542ff12a
 /etc/udev/run.rules a5625f4c4c541beb546206ee0e5e277f
 /etc/udev/links.conf 50f175cab5d8c503598a157b6e485e1b
 /etc/udev/compat-full.rules 659b834be979c31d82f9acdf93ea9a66
 /etc/udev/persistent-input.rules 0a150734b4c59b6f4fca4428b4631129
 /etc/udev/persistent.rules 029f48d4afbdfe62b9adeaff856e14ad
 /etc/udev/cd-aliases-generator.rules 3a3dbd5c53c4f1483584f9b4a1a94e11
 /etc/udev/udev.rules 337de0b89eb11c00cebaf983f8956b5b
 /etc/udev/devfs.rules 9a29fef0386a3c24ffa1a558fc9fa4fc
 /etc/udev/hotplug.rules a86f46120ff5cc7603035819b6ca2ca5
 /etc/udev/permissions.rules 5e79342abf5cc987bf1eeefafc4f7dcb
 /etc/udev/persistent-net-generator.rules f3f194032dbf50e8e3895a1d5102be49
 /etc/udev/compat.rules 465b423d2d5b52ee2be30e16dfbe4cfb
 /etc/scsi_id.config 90c176456f98d5f9407cc8a7540ae1d8
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.

Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1332
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: i386
Version: 1.3.6.0debian1-5
Depends: libc6 (>= 2.3.6-6), libselinux1 (>= 1.32)
Description: administration tools for packet filtering and NAT
 netfilter and iptables provide a Linux kernel framework for
 stateful and stateless packet filtering, network and port address
 translation, and other IP packet manipulation. The framework is
 the successor to ipchains.
 .
 netfilter and iptables are used in applications such as Internet
 connection sharing, firewalls, IP accounting, transparent proxying,
 advanced routing and traffic control.
 .
 Please note: the iptables extensions included in this package
 require kernel support that might not be available in official Linux
 kernel sources or Debian's packaged Linux kernel sources. And if
 support for any extension is available for the specific Linux kernel
 source version, that support might not be enabled in the Linux kernel
 binary in use.
 .
 In particular, kernel patches for IPV4OPTSSTRIP, ROUTE, TARPIT,
 ipv4options, u32 and set are currently located in patch-o-matic-ng
 via the netfilter website. patch-o-matic-ng patches are often
 imported into the official Linux kernel source tree.
 .
 netfilter web site: http://www.netfilter.org/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1848
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Version: 3.1dfsg-8
Replaces: bash-doc (<= 2.05-1), bash-completion
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5)
Suggests: bash-doc
Conflicts: bash-completion
Conffiles:
 /etc/skel/.bashrc de2b922ef0623ba36dda5fb6f7f7d9ea
 /etc/skel/.bash_profile d1a8c44e7dd1bed2f3e75d1343b6e4e1
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/bash.bashrc 596642d7415ff5d9f013786028a39583
 /etc/bash_completion 9da8d1c95748865d516764fb9af82af9
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 Included in the bash package is the Programmable Completion Code, by
 Ian Macdonald.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 992
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Version: 2.12r-19etch1
Replaces: miscutils, setterm, fdisk
Depends: lsb-base (>= 3.0-6), tzdata (>= 2006c-2)
Pre-Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5), libslang2 (>= 2.0.6-3), libuuid1, zlib1g (>= 1:1.2.1)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: setterm, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21)
Conffiles:
 /etc/init.d/hwclock.sh 87dd21468127c6e0c079fecf9fe6d84f
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libkrb53
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 988
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: krb5
Version: 1.4.4-7etch4
Depends: libc6 (>= 2.3.6-6), libcomerr2 (>= 1.33-3)
Suggests: krb5-doc, krb5-user
Conflicts: openafs-krb5 (<< 1.3-10), ssh-krb5 (<< 3.8.1p1-10), libauthen-krb5-perl (<< 1.4-5), libapache-mod-auth-kerb (<= 4.996-5.0-rc6-2), libapache2-mod-auth-kerb (<= 4.996-5.0-rc6-2)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos5.
 .
 This package contains the runtime libraries used by applications and
 Kerberos clients.

Package: zaptel-firmware
Status: install ok installed
Priority: optional
Section: comm
Installed-Size: 592
Maintainer: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Architecture: all
Source: zaptel
Version: 1:1.4.7.xpp.r5178-2
Replaces: zaptel (<= 1:1.2.6-1), xpp-firmware
Conflicts: zaptel (<= 1:1.2.6-1), xpp-firmware
Description: firmware for Xorcom Astribank zaptel driver (xpp)
 A package of the firmware files for the Xorcom[tm] Astribank[tm] USB
 channel bank for use with the Asterisk[tm] PBX, as well as for the
 Ocastic echo canceller of some Digium cards.
 .
 This package complements the package zaptel with the required firmware.

Package: frottle
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 108
Maintainer: Kim-man "Punky" Tse <punkytse@yahoo.com>
Architecture: i386
Version: 0.2.1-1
Depends: libc6 (>= 2.3.2.ds1-21), iptables
Conffiles:
 /etc/frottle.conf.sample c30a07f5b112d517885d5f7523b91fdb
Description: Packet Scheduling and QoS for Wireless Networks
 Frottle (Freenet throttle) is an open source GNU GPL project to
 control traffic on wireless networks. Such control eliminates the
 common hidden-node effect even on large scale wireless networks.
 Frottle is currently only available for Linux wireless gateways
 using iptables firewalls, with plans to develop a windows client
 in the future.
 .
 Frottle works by scheduling the traffic of each client, using a
 master node to co-ordinate actions. This eliminates collisions,
 and prevents clients with stronger signals from receiving bandwidth
 bias.
 .
 Frottle has been developed and tested on the large community
 wireless network of WaFreeNet. We have found running frottle has
 given us a significant improvment in the network usability. Testing
 results will be documented here as time permits.

Package: elvis-tiny
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 148
Maintainer: Miquel van Smoornburg <miquels@cistron.nl>
Architecture: i386
Version: 1.4-20
Pre-Depends: libc6 (>= 2.3.2.ds1-21), libncurses5 (>= 5.4-1)
Description: Tiny vi compatible editor for the base system
 Elvis-tiny is based on a 1991 Minix version of elvis. You should install
 another vi-editor (such as "vim", "elvis" or "nvi") if you want a vi
 editor that is full featured and has no bugs.

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 360
Maintainer: Clint Adams <schizo@debian.org>
Architecture: i386
Version: 2.6-18
Replaces: cpio-mt
Depends: libc6 (>= 2.3.6-6)
Conflicts: mt-st (<< 0.6), cpio-mt
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.

Package: wavemon
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 100
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: i386
Version: 0.4.0b-9
Depends: libc6 (>= 2.3.5-1), libncurses5 (>= 5.4-5)
Description: Wireless Device Monitoring Application
 Wavemon allows you to watch signal and noise levels, packet
 statistics, device configuration and network parameters of your
 wireless network hardware.  It has currently only been tested with
 the Lucent Orinoco series of cards, although it *should* work (though
 with varying features) with all devices supported by the wireless
 kernel extensions by Jean Tourrilhes.

Package: aircrack-ng
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 520
Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
Architecture: i386
Version: 1:0.6.2-7etch1
Depends: libc6 (>= 2.3.6-6), wireless-tools
Description: wireless WEP/WPA cracking utilities
 aircrack-ng is an 802.11a/b/g WEP/WPA cracking program that can recover a
 40-bit, 104-bit, 256-bit or 512-bit WEP key once enough encrypted packets have
 been gathered. Also it can attack WPA1/2 networks with some advanced
 methods or simply by brute force.
 .
 It implements the standard FMS attack along with some optimizations,
 thus making the attack much faster compared to other WEP cracking tools.
 It can also fully use a multiprocessor system to its full power in order
 to speed up the cracking process.
 .
 aircrack-ng is a fork of aircrack, as that project has been stopped by
 the upstream maintainer.
 .
  Homepage: http://www.aircrack-ng.org/

Package: libstdc++6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 892
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.1 (4.1.1ds2-21)
Version: 4.1.1-21
Depends: gcc-4.1-base (= 4.1.1-21), libc6 (>= 2.3.6-6), libgcc1 (>= 1:4.1.1-12)
Conflicts: scim (<< 1.4.2-1)
Description: The GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: busybox
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 508
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: i386
Version: 1:1.1.3-4
Replaces: busybox-static
Depends: libc6 (>= 2.3.6-6)
Conflicts: busybox-static
Description: Tiny utilities for small and embedded systems
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 This package installs the BusyBox binary but does not install symlinks
 for any of the supported utilities. You can use /bin/busybox --install
 to install BusyBox to the current directory (you do not want to do this
 in / on your Debian system!).

Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 560
Maintainer: Fumitoshi UKAI <ukai@debian.or.jp>
Architecture: all
Version: 20070303
Depends: openssl, debconf (>= 0.5) | debconf-2.0
Enhances: libssl0.9.8, openssl
Description: Common CA Certificates PEM files
 It includes the followings PEM files of CA certificates
 .
  * spi-inc.org certificate
  * db.debian.org certificate
  * debconf.org certificate
  * Mozilla builtin CA certificates
  * CACert.org certificates
  * Brazilian Government Certificate
  * Signet CA certificates
  * QuoVadis CA certificates
 .
 This is useful for any openssl applications to verify
 SSL connection.
 .
 Note that certificate authorities whose certificates are included in
 this package are not in any way audited for trustworthiness and RFC
 3647 compliance, and that full responsibility to assess them rests
 with the user.

Package: vim-tiny
Status: purge ok not-installed
Priority: important
Section: editors

Package: libdevmapper1.02
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 100
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: devmapper
Version: 2:1.02.08-1
Provides: libdevmapper
Depends: libc6 (>= 2.3.6-6), libselinux1 (>= 1.30), libsepol1 (>= 1.12)
Conffiles:
 /etc/init.d/libdevmapper1.02 0dab8e9f76db2df3b4d31c6d4c636226
Description: The Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).

Package: less
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 268
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 394-4
Depends: libc6 (>= 2.3.6-6), libncurses5 (>= 5.4-5), debianutils (>= 1.8)
Description: Pager program similar to more
 Less is a program similar to more(1), but which allows backward
 movement in the file as well as forward movement.  Also, less does not
 have to read the entire input file before starting, so with large input
 files it starts up faster than text editors like vi(1).  Less uses
 termcap (or terminfo on some systems), so it can run on a variety of
 terminals.  There is even limited support for hardcopy terminals.
 .
  Homepage: http://www.greenwoodsoftware.com/less/

Package: olsrd
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 396
Maintainer: Holger Levsen <holger@debian.org>
Architecture: i386
Version: 0.5.5-1
Depends: libc6 (>= 2.3.6-6)
Conffiles:
 /etc/default/olsrd b4f878dcd7b05d837b51cfacd79c527d
 /etc/olsrd/olsrd.conf 4716718feb273226c901de662c8f0189
 /etc/init.d/olsrd 7faf5a3857941d23f983b8fff2ff81bd
Description: optimized link-state routing daemon (unik-olsrd)
 unik-olsrd is an implementation of the Optimized Link State Routing protocol
 for Mobile Ad-Hoc networks(MANET). The protocol is described in RFC3626. It
 is designed to be run as a standalone server process - but as it is still in
 an experimental stage most users will prefer running it with some debug
 output which is directed to STDOUT.
 .
 OLSR operates as a table driven, proactive protocol, i.e., it exchanges
 topology information with other nodes of the network regularly. It is
 developed to work independently from other protocols. Likewise, OLSR makes no
 assumptions about the underlying link-layer.

Package: libtext-charwidth-perl
Status: purge ok not-installed
Priority: required
Section: perl

Package: readline-common
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 136
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: readline5
Version: 5.2-2
Replaces: libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11), libreadline-common
Conflicts: libreadline5 (<< 5.0-11), libreadline-common
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libcap1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: i386
Source: libcap
Version: 1:1.10-14
Depends: libc6 (>= 2.3.2.ds1-4)
Description: support for getting/setting POSIX.1e capabilities
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.  Note that it will not provide any functionality with kernels
 below 2.2

Package: libgnutls13
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 668
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Source: gnutls13
Version: 1.4.4-3
Replaces: gnutls0, gnutls3, gnutls0.4
Depends: libc6 (>= 2.3.6-6), libgcrypt11 (>= 1.2.2), libgpg-error0 (>= 1.4), liblzo1, libopencdk8 (>= 0.5.8), libtasn1-3 (>= 0.3.4), zlib1g (>= 1:1.2.1)
Suggests: gnutls-bin
Conflicts: gnutls0, gnutls0.4
Description: the GNU TLS library - runtime library
 gnutls is a portable library which implements the Transport Layer
 Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols.
 .
 Currently gnutls implements:
  - the TLS 1.0 and SSL 3.0 protocols, without any US-export
    controlled algorithms
  - X509 Public Key Infrastructure (with several limitations).
  - SRP for TLS authentication.
  - TLS Extension mechanism
 .
 This package contains the runtime libraries.

Package: libwrap0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 84
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: tcp-wrappers
Version: 7.6.dbs-13
Depends: libc6 (>= 2.3.6-6)
Recommends: tcpd
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: netcat
Status: purge ok not-installed
Priority: important
Section: net

