#!/bin/bash
#
### BEGIN INIT INFO
# Provides: quagga
# Required-Start: $local_fs $network $remote_fs $syslog
# Required-Stop: $local_fs $network $remote_fs $syslog
# Default-Start:  2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop the Quagga routing suite
# Description: Quagga is a routing suite for IP routing protocols like 
#              BGP, OSPF, RIP and others. This script contols the main 
#              daemon "quagga" as well as the individual protocol daemons.
### END INIT INFO
#

PATH=/bin:/usr/bin:/sbin:/usr/sbin
D_PATH=/usr/lib/quagga
C_PATH=/etc/quagga
DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd" # keep zebra first!

# Print the name of the pidfile.
pidfile()
{
	echo "/var/run/quagga/$1.pid"
}

# Check if daemon is started by using the pidfile.
started()
{
	[ -e `pidfile $1` ] && kill -0 `cat \`pidfile $1\`` 2> /dev/null && return 0
	return 1
}

# Loads the config via vtysh -b if configured to do so.
vtysh_b ()
{
	# Rember, that all variables have been incremented by 1 in convert_daemon_prios()
	if [ "$vtysh_enable" = 2 -a -f $C_PATH/Quagga.conf ]; then
		/usr/bin/vtysh -b
	fi
}

# Check if the daemon is activated and if its executable and config files 
# are in place.
# params: 	daemon name
# returns:	0=ok, 1=error
check_daemon()
{
	# If the integrated config file is used the others are not checked.
	if [ -r "$C_PATH/Quagga.conf" ]; then
	  return 0
	fi 

	# vtysh_enable has no config file nor binary so skip check.
	# (What is this good for? IIRC it was a "daemons" entry somewhen)
	if [ $1 != "vtysh_enable" ]; then
	  # check for daemon binary
          if [ ! -x "$D_PATH/$1" ]; then return 1; fi
		
	  # check for config file		  
	  if [ ! -r "$C_PATH/$1.conf" ]; then
   	    echo -n " (not started without config file)"
	    return 1
	  fi
	fi
	return 0
}

# Starts the server if it's not alrady running according to the pid file.
# The Quagga daemons creates the pidfile when starting.
start()
{
	echo -n " $1"
	if ! check_daemon $1; then return; fi

	start-stop-daemon \
		--start \
		--pidfile=`pidfile $1` \
		--exec "$D_PATH/$1" \
		-- \
		`eval echo "$""$1""_options"`
		
}

# Stop the daemon given in the parameter, printing its name to the terminal.
stop()
{
    if ! started "$1" ; then
	echo -n " ($1)"
	return 0
    else
	PIDFILE=`pidfile $1`
	PID=`cat $PIDFILE 2>/dev/null`
	start-stop-daemon --stop --quiet --oknodo --exec "$D_PATH/$1"
	#
	#       Now we have to wait until $DAEMON has _really_ stopped.
	#
	if test -n "$PID" && kill -0 $PID 2>/dev/null; then
	    echo -n " (waiting) ."
	    cnt=0
	    while kill -0 $PID 2>/dev/null; do
		cnt=`expr $cnt + 1`
		if [ $cnt -gt 60 ]; then
		    # Waited 120 secs now, fail.
		    echo -n "Failed.. "
		    break
		fi
		sleep 2
		echo -n "."
		done
	    fi
	echo -n " $1"
	rm -f `pidfile $1`
    fi
}

# Converts values from /etc/quagga/daemons to all-numeric values.
convert_daemon_prios()
{
	for name in $DAEMONS zebra vtysh_enable; do
	  # First, assign the value set by the user to $value 
	  eval value=\$$name

	  # Daemon not activated or entry missing?
	  if [ "$value" = "no" -o "$value" = "" ]; then value=0; fi

	  # These strings parsed for backwards compatibility.
	  if [ "$value" = "yes"  -o  "$value" = "true" ]; then value=1; fi

	  # Zebra is threatened special. It must be between 0=off and the first
          # user assigned value "1" so we increase all other enabled daemons' values.
	  if [ "$name" != "zebra" -a "$value" -gt 0 ]; then value=`expr "$value" + 1`; fi

	  # If e.g. name is zebra then we set "zebra=yes".
	  eval $name=$value
	done
}

# Stops all daemons that have a lower level of priority than the given.
# (technically if daemon_prio >= wanted_prio)
stop_prio() 
{
	local wanted_prio
	local daemon_prio
	local daemon_list

	wanted_prio=$1
	daemon_list=${2:-$DAEMONS}

	echo -n "Stopping Quagga daemons (prio:$wanted_prio):"

	for prio_i in `seq 10 -1 $wanted_prio`; do
	    for daemon_name in $daemon_list; do
		eval daemon_prio=\$$daemon_name
		if [ $daemon_prio -eq $prio_i ]; then
		    stop "$daemon_name"
		fi
	    done
	done
	echo "."
}

# Starts all daemons that have a higher level of priority than the given.
# (technically if daemon_prio <= wanted_prio)
start_prio()
{
	local wanted_prio
	local daemon_prio
	local daemon_list
	
	wanted_prio=$1
	daemon_list=${2:-$DAEMONS}

	echo -n "Starting Quagga daemons (prio:$wanted_prio):"

	for prio_i in `seq 1 $wanted_prio`; do
	    for daemon_name in $daemon_list; do
		eval daemon_prio=\$$daemon_name
		if [ $daemon_prio -eq $prio_i ]; then
	 	    start "$daemon_name"
		fi
	    done
	done
	echo "."
}

#########################################################
# 		Main program 				#
#########################################################

# Config broken but script must exit silently.
[ ! -r "$C_PATH/daemons" ] && exit 0

# Load configuration
. "$C_PATH/daemons"
. "$C_PATH/debian.conf"

# Set priority of un-startable daemons to 'no' and substitute 'yes' to '0'
convert_daemon_prios

# Just for me :-)
if [ "$DEBIAN_SCRIPT_DEBUG" != "" ]; then
  for name in $DAEMONS zebra vtysh_enable; do
    echo -n "$name="; eval echo \$$name
  done
fi

if [ ! -d /var/run/quagga ]; then
    mkdir -p /var/run/quagga
    chown quagga:quagga /var/run/quagga
    chmod 755 /var/run/quagga
fi

case "$1" in
    start)
	# Try to load this necessary (at least for 2.6) module.
	if [ -d /lib/modules/`uname -r` ] ; then
	  echo "Loading capability module if not yet done."
	  set +e; LC_ALL=C modprobe -a capability 2>&1 | egrep -v "(not found|Can't locate)"; set -e
	fi
	# Start all daemons
	cd $C_PATH/
	start_prio 10 $2
	vtysh_b
    	;;
	
    1|2|3|4|5|6|7|8|9|10)
	# Stop/start daemons for the appropriate priority level
	stop_prio $1
	start_prio $1
	vtysh_b
	;;

    stop|0)
	# Stop all daemons at level '0' or 'stop'
  	stop_prio 0 $2

	echo "Removing all routes made by zebra."
	ip route flush proto zebra
   	;;

    restart|force-reload)
	$0 stop $2
	sleep 1
	$0 start $2
	;;

    *)
    	echo "Usage: /etc/init.d/quagga {start|stop|restart|force-reload|<priority>} [daemon]"
	echo "       E.g. '/etc/init.d/quagga 5' would start all daemons with a prio 1-5."
	echo "       Read /usr/share/doc/quagga/README.Debian for details."
	exit 1
	;;
esac

exit 0
